KNX T-Objekt-UP
KNX Temperature Sensor
KNX Indoor Temperature Sensor with Controller for Heating
The Temperature Sensor KNX T-Objekt-UP measures ambient temperature. The sensor can receive an external measured value via the bus and process it with the own data to an overall temperature (mixed value).
The KNX T-Objekt-UP provides three switching outputs with adjustable threshold values. The switching outputs and further communication objects can be linked via AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has got a PI controller for heating and cooling.
The device is completed with a frame and cover of the switching series installed in the building and thus merges with the interior.
- Measurement of temperature
- Mixed value from own measured value and external value (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum or avarage values. Each with 5 inputs (for values received via communication objects)
- Configuration via ETS
General | |
Housing Plastic | (partially painted) |
Colours | White, glossy, similar to RAL 9016 Traffic White |
Assembly | on device socket according to DIN 49073 |
Dimensions | Housing approx. 55 x 55 (W x H, mm), Installation via socket approx. 18.5 mm, Total depth approx. 25.5 mm, Baseplate approx. 71 x 71 (W x H, mm), |
Weight | approx. 45 g |
Ambient temperature | -25…+80°C |
Ambient humidity | 5...95% RH, non-condensing |
Storage | -40…+85°C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus | |
KNX medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses | max. 254 |
Assignments | max. 254 |
Communication objects | 151 |
Nominal voltage KNX | 30 V SELV |
Power consumption KNX | max. 10 mA |
Connection | KNX plug terminals |
Duration after bus voltage restoration until data is received | approx. 5 seconds |
Sensors | |
Measurement range | -25…+80°C |
Resolution | 0.1°C |
- Sensor board, serves as base plate
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian, Spanish) as download
- Manual (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Socket Ø 60 mm, 42 mm deep
- Frame according to the switching programme used in the building
- Cover according to the switching programme
Filter by language:
ZIP
Item No.: 70179
Languages:
RTF
Item No.: 70179
Languages:
ZIP
Item No.: 70179
Languages:
The Temperature Sensor KNX T-Objekt-UP measures ambient temperature. The sensor can receive an external measured value via the bus and process it with the own data to an overall temperature (mixed value).
The KNX T-Objekt-UP provides three switching outputs with adjustable threshold values. The switching outputs and further communication objects can be linked via AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has got a PI controller for heating and cooling.
The device is completed with a frame and cover of the switching series installed in the building and thus merges with the interior.
- Measurement of temperature
- Mixed value from own measured value and external value (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum or avarage values. Each with 5 inputs (for values received via communication objects)
- Configuration via ETS
General | |
Housing Plastic | (partially painted) |
Colours | White, glossy, similar to RAL 9016 Traffic White |
Assembly | on device socket according to DIN 49073 |
Dimensions | Housing approx. 55 x 55 (W x H, mm), Installation via socket approx. 18.5 mm, Total depth approx. 25.5 mm, Baseplate approx. 71 x 71 (W x H, mm), |
Weight | approx. 45 g |
Ambient temperature | -25…+80°C |
Ambient humidity | 5...95% RH, non-condensing |
Storage | -40…+85°C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus | |
KNX medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses | max. 254 |
Assignments | max. 254 |
Communication objects | 151 |
Nominal voltage KNX | 30 V SELV |
Power consumption KNX | max. 10 mA |
Connection | KNX plug terminals |
Duration after bus voltage restoration until data is received | approx. 5 seconds |
Sensors | |
Measurement range | -25…+80°C |
Resolution | 0.1°C |
- Sensor board, serves as base plate
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian, Spanish) as download
- Manual (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Socket Ø 60 mm, 42 mm deep
- Frame according to the switching programme used in the building
- Cover according to the switching programme
Filter by language:
ZIP
Item No.: 70179
Languages:
RTF
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
ZIP
Item No.: 70179
Languages: