KNX T-UP gl
Temperature Sensor
Indoor teperature sensor for KNX. With controller for heating
The Sensor KNX T-UP gl measures the room temperature. The indoor sensor can receive an external measured value via the bus and process it with own data to an overall temperature value (mixed value).
The KNX T-UP gl provides adjustable threshold values. The threshold value outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has integrated PI controller for a heating/cooling system.
The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
N° 70631 KNX T-UP gl, jet black RAL 9005
N° 70632 KNX T-UP gl, pure white RAL 9010
Delivery without frame
- Measurement of temperature
- Mixed values from own measured value and external values (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Threshold values can be adjusted per parameter or via communication objects: 3 × temperature
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum or average values. Each with 5 inputs (for values received via communication objects)
- Configuration is made using the KNX software ETS
| General | Casing Genuine glass, plastic |
| Colours (similar) | RAL 9010 (white) RAL 9005 (black) |
| Degree of protection (after assembly) |
IP20 |
| Size (W × H × D) | ≈ 55 mm × 55 mm × 35 mm |
| Supporting ring (W × H) | ≈ 71 mm × 71 mm |
| Mounting depth | ≈ 7 mm |
| Total weight | ≈ 53 g |
| Ambient temperature | -5…+45 °C |
| Ambient humidity (RH) (non-condensing) |
0...95 % |
| Storage temperature | -10...+60 °C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | 152 |
| Nominal voltage | 30 V SELV |
| Power consumption max. | 10 mA |
| Connection KNX plug-in terminals | Conductor diameter: 0.6…0.8 mm s Stripping length: 5 mm |
| Duration after bus voltage restoration until data is received approx. |
6 s |
| Sensors | |
| Temperature measurement range | -5…+60 °C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Housing
- Supporting ring
- KNX plug-in terminal
- Data Sheet with installation instruction (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian, Spanish) as download
You will need additionally (not included):
- Windproof device socket according to DIN EN IEC 60670-1 and DIN 49073
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building"
Filter by language:
ZIP
Item No.: 70631, 70632, 70636, 70635
Languages:
Item No.: 70631, 70632
Languages:
RTF
ZIP
Item No.: 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70973, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71050, 71052
Languages:
ZIP
Item No.: 71390, 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70970, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71380, 71050, 71052
Languages:
The Sensor KNX T-UP gl measures the room temperature. The indoor sensor can receive an external measured value via the bus and process it with own data to an overall temperature value (mixed value).
The KNX T-UP gl provides adjustable threshold values. The threshold value outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has integrated PI controller for a heating/cooling system.
The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
N° 70631 KNX T-UP gl, jet black RAL 9005
N° 70632 KNX T-UP gl, pure white RAL 9010
Delivery without frame
- Measurement of temperature
- Mixed values from own measured value and external values (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Threshold values can be adjusted per parameter or via communication objects: 3 × temperature
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum or average values. Each with 5 inputs (for values received via communication objects)
- Configuration is made using the KNX software ETS
| General | Casing Genuine glass, plastic |
| Colours (similar) | RAL 9010 (white) RAL 9005 (black) |
| Degree of protection (after assembly) |
IP20 |
| Size (W × H × D) | ≈ 55 mm × 55 mm × 35 mm |
| Supporting ring (W × H) | ≈ 71 mm × 71 mm |
| Mounting depth | ≈ 7 mm |
| Total weight | ≈ 53 g |
| Ambient temperature | -5…+45 °C |
| Ambient humidity (RH) (non-condensing) |
0...95 % |
| Storage temperature | -10...+60 °C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | 152 |
| Nominal voltage | 30 V SELV |
| Power consumption max. | 10 mA |
| Connection KNX plug-in terminals | Conductor diameter: 0.6…0.8 mm s Stripping length: 5 mm |
| Duration after bus voltage restoration until data is received approx. |
6 s |
| Sensors | |
| Temperature measurement range | -5…+60 °C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Housing
- Supporting ring
- KNX plug-in terminal
- Data Sheet with installation instruction (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian, Spanish) as download
You will need additionally (not included):
- Windproof device socket according to DIN EN IEC 60670-1 and DIN 49073
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building"
Filter by language:
ZIP
Item No.: 70631, 70632, 70636, 70635
Languages:
Item No.: 70631, 70632
Languages:
Item No.: 70631, 70632
Languages:
Item No.: 70631, 70632
Languages:
Item No.: 70631, 70632
Languages:
Item No.: 70631, 70632
Languages:
Item No.: 70631, 70632
Languages:
RTF
Item No.: 70631, 70632
Languages:
ZIP
Item No.: 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70973, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71050, 71052
Languages:
ZIP
Item No.: 71390, 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70970, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71380, 71050, 71052
Languages: