KNX T-UP gl CH
Temperature sensor and controller
Indoor teperature sensor for KNX. With controller for heating
Highlights
-
-
Room controller with glass surface
-
-
Heating control
- - Integrated temperature sensor
- Room controller with glass surface
- Heating control
- Integrated temperature sensor
The Sensor KNX T-UP gl CH measures the room temperature. The indoor sensor can receive an external measured value via the bus and process it with own data to an overall temperature value (mixed value). The KNX T-UP gl CH provides adjustable threshold values. The threshold value outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has integrated PI controller for a heating/cooling system. The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
N° 70635 KNX T-UP gl CH, pure white RAL 9010
N° 70636 KNX T-UP gl CH, jet black RAL 9005
Delivery without frame
- Measurement of temperature
- Mixed values from own measured value and external values (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step)depending on temperature. Control according to separate target values orbasic target temperature
- Threshold values can be adjusted per parameter or via communication objects: 3 × temperature
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum oraverage values. Each with 5 inputs (for values received via communication objects)
- Configuration is made using the KNX software ETS
| Housing | Real glass, plastic |
| Colours | similar to RAL 9010 pure white • similar to RAL 9005 jet black |
| Mounting | Installation in inlet box |
| Protection category | IP 20 |
| Dimensions | Housing approx. 60 x 60 (W x H, mm), mounting depth approx. 8 mm |
| Total weight | approx. 50 g |
| Ambient temperature | Operation 0…+50°C, storage -10…+60°C |
| Ambient air humidity | max. 95% RH, avoid bedewing |
| Operating voltage | KNX bus voltage |
| Bus current | max. 10 mA |
| Data output | KNX +/- bus terminal plug |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | 152 |
| Temperature measurement range | 0…+50°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
-
Housing
-
Mounting adapter with screws
-
Data sheet with installation instruction German, English, French, Italian, Spanish)
-
Manual (German, English, French, Italian, Spanish) as download
-
Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77mm) for swiss installation standard
- Inlet box
Filter by language:
ZIP
Item No.: 70631, 70632, 70636, 70635
Languages:
RTF
Item No.: 70636, 70635
Languages:
- Room controller with glass surface
- Heating control
- Integrated temperature sensor
The Sensor KNX T-UP gl CH measures the room temperature. The indoor sensor can receive an external measured value via the bus and process it with own data to an overall temperature value (mixed value). The KNX T-UP gl CH provides adjustable threshold values. The threshold value outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has integrated PI controller for a heating/cooling system. The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
N° 70635 KNX T-UP gl CH, pure white RAL 9010
N° 70636 KNX T-UP gl CH, jet black RAL 9005
Delivery without frame
- Measurement of temperature
- Mixed values from own measured value and external values (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step)depending on temperature. Control according to separate target values orbasic target temperature
- Threshold values can be adjusted per parameter or via communication objects: 3 × temperature
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum oraverage values. Each with 5 inputs (for values received via communication objects)
- Configuration is made using the KNX software ETS
| Housing | Real glass, plastic |
| Colours | similar to RAL 9010 pure white • similar to RAL 9005 jet black |
| Mounting | Installation in inlet box |
| Protection category | IP 20 |
| Dimensions | Housing approx. 60 x 60 (W x H, mm), mounting depth approx. 8 mm |
| Total weight | approx. 50 g |
| Ambient temperature | Operation 0…+50°C, storage -10…+60°C |
| Ambient air humidity | max. 95% RH, avoid bedewing |
| Operating voltage | KNX bus voltage |
| Bus current | max. 10 mA |
| Data output | KNX +/- bus terminal plug |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | 152 |
| Temperature measurement range | 0…+50°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
-
Housing
-
Mounting adapter with screws
-
Data sheet with installation instruction German, English, French, Italian, Spanish)
-
Manual (German, English, French, Italian, Spanish) as download
-
Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77mm) for swiss installation standard
- Inlet box
Filter by language:
ZIP
Item No.: 70631, 70632, 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
Item No.: 70636, 70635
Languages:
RTF
Item No.: 70636, 70635
Languages: