KNX TH-UP gl CH
Sensor and controller for temperature, humidity
Combined indoor sensor for KNX with sensors for temperature and humidity. With controller for heating and ventilation
Highlights
-
-
Room controller with glass surface
-
-
Heating control and ventilation control
- - Integrated sensors
- Room controller with glass surface
- Heating control and ventilation control
- Integrated sensors
The Sensor KNX TH-UP gl measures the temperature and humidity and calculates the dew point. The sensor can receive external measured values via the bus and process them with the own data to overall values (mixed values, e. g. room average).
KNX TH-UP Touch provides switching outputs with adjustable threshold values. The switching outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects.
Integrated PI controllers allows for control of a ventilation (depending on air humidity) and a heating/cooling system (depending on temperature). The KNX THUP Touch can emit a warning to the bus as soon as the area of optimum comfort (according to DIN 1946) is left.
The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
N° 70644 KNX TH-UP gl CH, pure white RAL 9010
N° 70645 KNX TH-UP gl CH, jet black RAL 9005
Delivery without frame
- Measurement of temperature and air humidity (absolute and relative), calculation of the dew point
- Mixed values from own measured values and external values (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- PI controller for ventilation depending on humidity: dehumidification/ humidification (one step) or dehumidification (one or two step)
- Threshold values can be adjusted per parameter or via communication objects: 3 × temperature, 2 × humidity
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum oraverage values. Each with 5 inputs (for values received via communication objects)
- Configuration is made using the KNX software ETS 5
| Housing | Glass, plastic material |
| Colours | • similar to RAL 9010 pure white • similar to RAL 9005 jet black |
| Mounting | Installation in inlet box |
| Protection category | IP 20 |
| Dimensions | Housing approx. 60 x 60 (W x H, mm), mounting depth approx. 8 mm |
| Total weight | approx. 50 g |
| Ambient temperature | Operation 0…+50°C, storage -10…+60°C |
| Ambient air humidity | max. 95% RH, avoid bedewing |
| Operating voltage | KNX bus voltage |
| Bus current | max. 10 mA |
| Data output | KNX +/- bus terminal plug |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | 158 |
| Temperature measurement range | 0…+50°C |
| Humidity measurement range | 0% RH …95% RH |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
-
Housing with display
-
Mounting adapter with screws
-
Data sheet with installation instruction German, English, French, Italian, Spanish)
-
Manual (German, English, French, Italian, Spanish) as download
-
Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for swiss installation standard
- Inlet box
Filter by language:
ZIP
Item No.: 70622, 70623, 70644, 70645
Languages:
RTF
Item No.: 70644, 70645
Languages:
- Room controller with glass surface
- Heating control and ventilation control
- Integrated sensors
The Sensor KNX TH-UP gl measures the temperature and humidity and calculates the dew point. The sensor can receive external measured values via the bus and process them with the own data to overall values (mixed values, e. g. room average).
KNX TH-UP Touch provides switching outputs with adjustable threshold values. The switching outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects.
Integrated PI controllers allows for control of a ventilation (depending on air humidity) and a heating/cooling system (depending on temperature). The KNX THUP Touch can emit a warning to the bus as soon as the area of optimum comfort (according to DIN 1946) is left.
The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
N° 70644 KNX TH-UP gl CH, pure white RAL 9010
N° 70645 KNX TH-UP gl CH, jet black RAL 9005
Delivery without frame
- Measurement of temperature and air humidity (absolute and relative), calculation of the dew point
- Mixed values from own measured values and external values (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- PI controller for ventilation depending on humidity: dehumidification/ humidification (one step) or dehumidification (one or two step)
- Threshold values can be adjusted per parameter or via communication objects: 3 × temperature, 2 × humidity
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum oraverage values. Each with 5 inputs (for values received via communication objects)
- Configuration is made using the KNX software ETS 5
| Housing | Glass, plastic material |
| Colours | • similar to RAL 9010 pure white • similar to RAL 9005 jet black |
| Mounting | Installation in inlet box |
| Protection category | IP 20 |
| Dimensions | Housing approx. 60 x 60 (W x H, mm), mounting depth approx. 8 mm |
| Total weight | approx. 50 g |
| Ambient temperature | Operation 0…+50°C, storage -10…+60°C |
| Ambient air humidity | max. 95% RH, avoid bedewing |
| Operating voltage | KNX bus voltage |
| Bus current | max. 10 mA |
| Data output | KNX +/- bus terminal plug |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | 158 |
| Temperature measurement range | 0…+50°C |
| Humidity measurement range | 0% RH …95% RH |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
-
Housing with display
-
Mounting adapter with screws
-
Data sheet with installation instruction German, English, French, Italian, Spanish)
-
Manual (German, English, French, Italian, Spanish) as download
-
Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for swiss installation standard
- Inlet box
Filter by language:
ZIP
Item No.: 70622, 70623, 70644, 70645
Languages:
Item No.: 70644, 70645
Languages:
Item No.: 70644, 70645
Languages:
RTF
Item No.: 70644, 70645
Languages:
Item No.: 70644, 70645
Languages:
Item No.: 70644, 70645
Languages:
Item No.: 70644, 70645
Languages:
Item No.: 70644, 70645
Languages:
Item No.: 70644, 70645
Languages:
Item No.: 70644, 70645
Languages:
Item No.: 70644, 70645
Languages:
Item No.: 70644, 70645
Languages: