KNX T-Objekt-UP
KNX Temperature Sensor
KNX Indoor Temperature Sensor with Controller for Heating
The Temperature Sensor KNX T-Objekt-UP measures ambient temperature. The sensor can receive an external measured value via the bus and process it with the own data to an overall temperature (mixed value).
The KNX T-Objekt-UP provides three switching outputs with adjustable threshold values. The switching outputs and further communication objects can be linked via AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has got a PI controller for heating and cooling.
The device is completed with a frame and cover of the switching series installed in the building and thus merges with the interior.
- Measurement of temperature
- Mixed value from own measured value and external value (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum or avarage values. Each with 5 inputs (for values received via communication objects)
- Configuration via ETS
| General: | |
| Dimensions Mounting plate (W × H) | ≈ 70 mm × 70 mm |
| Total weight | ≈ 20 g |
| Ambient temperature | -5…+45°C |
| RH (relative humidity), non-condensing |
0...95 % |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Pollution degree | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | 151 |
| Nominal voltage | 30V DC SELV |
| Power consumption [when programming LED is active] |
≤ 6 mA [≤ 10 mA] |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.8 mm s 5 mm |
| Duration after bus voltage restoration until data is received | ≈ 6 s |
| Sensors: | |
| Temperature measurement range | -5…+60°C |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- Sensor board, serves as supporting ring
- KNX plug-in terminal
- Installation instruction (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian, Spanish) as download
- Manual (German, English, French, Italian, Spanish) as download
Accessories required
- Suitable, windproof appliance box
- Frame and cover (55 × 55 mm), for example Berker S.1/S.3/B.7, Gira Standard 55, Jung A 550, Merten System M
Filter by language:
ZIP
Item No.: 70179
Languages:
RTF
Item No.: 70179
Languages:
ZIP
Item No.: 70179
Languages:
The Temperature Sensor KNX T-Objekt-UP measures ambient temperature. The sensor can receive an external measured value via the bus and process it with the own data to an overall temperature (mixed value).
The KNX T-Objekt-UP provides three switching outputs with adjustable threshold values. The switching outputs and further communication objects can be linked via AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has got a PI controller for heating and cooling.
The device is completed with a frame and cover of the switching series installed in the building and thus merges with the interior.
- Measurement of temperature
- Mixed value from own measured value and external value (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum or avarage values. Each with 5 inputs (for values received via communication objects)
- Configuration via ETS
| General: | |
| Dimensions Mounting plate (W × H) | ≈ 70 mm × 70 mm |
| Total weight | ≈ 20 g |
| Ambient temperature | -5…+45°C |
| RH (relative humidity), non-condensing |
0...95 % |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Pollution degree | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | 151 |
| Nominal voltage | 30V DC SELV |
| Power consumption [when programming LED is active] |
≤ 6 mA [≤ 10 mA] |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.8 mm s 5 mm |
| Duration after bus voltage restoration until data is received | ≈ 6 s |
| Sensors: | |
| Temperature measurement range | -5…+60°C |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- Sensor board, serves as supporting ring
- KNX plug-in terminal
- Installation instruction (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian, Spanish) as download
- Manual (German, English, French, Italian, Spanish) as download
Accessories required
- Suitable, windproof appliance box
- Frame and cover (55 × 55 mm), for example Berker S.1/S.3/B.7, Gira Standard 55, Jung A 550, Merten System M
Filter by language:
ZIP
Item No.: 70179
Languages:
RTF
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
Item No.: 70179
Languages:
ZIP
Item No.: 70179
Languages: