KNX VOC/TH-UP Touch CH
Room Controller, Mixed Gas/Temperature/Humidity
Combined indoor sensor for KNX with sensors for mixed gas, temperature, humidity. With display/touch buttons, controller for heating and ventilation
Highlights
-
-
Room controller with display and touch buttons
-
-
Heating control and ventilation control
-
-
glass surface
- - Integrated sensors
The Sensor KNX VOC/TH-UP Touch CH measures volatile organic compounds in the room air, temperature and humidity and calculates the dew point. The sensor can receive external measured values via the bus and process them with the own data to overall values (mixed values, e. g. room average). The KNX VOC/TH-UP Touch CH offers two push buttons that may be used for changing the ambient temperature (target value), for switching between operating modes or as free programmable bus push buttons. The KNX VOC/TH-UP Touch CH provides switching outputs with adjustable threshold values. The switching outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. Integrated PI controllers allows for control of a ventilation (depending on VOC concentration and air humidity) and a heating/cooling system (depending on temperature). The KNX VOC/TH-UP Touch CH can emit a warning to the bus soon as the area of optimum comfort (according to DIN 1946) is left. The integrated display shows the own values and data received from the bus (e.g. date, time). The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
No. 70970 KNX VOC/TH-UP Touch CH, pure white RAL 9010
No. 70971 KNX VOC/TH-UP Touch CH, jet black RAL 9005
Delivery without frame
- Measurement of VOC (volatile organic compounds) in the air. In this process, an air quality value in CO2 equivalents is calculated via an algorithm from the sum signal of all compounds included in the mixed gas.
- Measurement of temperature and air humidity (absolute and relative), calculation of the dew point
- Mixed values from own measured values and external values (proportions can be set in percentage)
- Display 1-3 rows (own values or values received from the bus) or display of temperature control (see Mode display and manual temperature controller)
- 2 push buttons. Configuration as bus push button or for changing ambient temperature and switching between operating modes (see Change ambient temperature with the buttons)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- PI controller for ventilation depending on humidity and VOC concentration: dehumidification/humidification (one step) or dehumidification (one or two step)
- Threshold values can be adjusted per parameter or via communication objects: 3 × temperature, 2 × humidity, 4 × VOC
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum or average values. Each with 5 inputs (for values received via communication objects)
- Configuration is made using the KNX software ETS 5
Housing | Plastic material |
Colours | • similar to RAL 9005 jet black • similar to RAL 9010 pure white |
Mounting | In-wall (wall mounting in socket Ø 60 mm, 42 mm deep, resp. cavity wall socket for hole Ø 68 mm) |
Protection category | IP 20 |
Dimensions | Housing approx. 60 x 60 (W x H, mm), mounting depth approx. 8 mm, base plate approx. 71 x 71 (W x H, mm) |
Total weight | approx. 68 g |
Ambient temperature | Operation 0…+50°C, storage -10…+60°C |
Ambient air humidity | min. 10% RH, max. 95% RH, avoid bedewing |
Operating voltage | KNX bus voltage |
Bus current | max. 20 mA |
Data output | KNX +/- bus terminal plug |
Communication objects | 224 |
VOC measurement range | 400...2000 ppm |
Temperature measurement range | 0…+50°C |
Humidity measurement range | 0% RH …95% RH |
- Housing with display
- Mounting adapter with screws
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for Swiss nstallation standard
- Inlet box
Filter by language:
RTF
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
The Sensor KNX VOC/TH-UP Touch CH measures volatile organic compounds in the room air, temperature and humidity and calculates the dew point. The sensor can receive external measured values via the bus and process them with the own data to overall values (mixed values, e. g. room average). The KNX VOC/TH-UP Touch CH offers two push buttons that may be used for changing the ambient temperature (target value), for switching between operating modes or as free programmable bus push buttons. The KNX VOC/TH-UP Touch CH provides switching outputs with adjustable threshold values. The switching outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. Integrated PI controllers allows for control of a ventilation (depending on VOC concentration and air humidity) and a heating/cooling system (depending on temperature). The KNX VOC/TH-UP Touch CH can emit a warning to the bus soon as the area of optimum comfort (according to DIN 1946) is left. The integrated display shows the own values and data received from the bus (e.g. date, time). The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
No. 70970 KNX VOC/TH-UP Touch CH, pure white RAL 9010
No. 70971 KNX VOC/TH-UP Touch CH, jet black RAL 9005
Delivery without frame
- Measurement of VOC (volatile organic compounds) in the air. In this process, an air quality value in CO2 equivalents is calculated via an algorithm from the sum signal of all compounds included in the mixed gas.
- Measurement of temperature and air humidity (absolute and relative), calculation of the dew point
- Mixed values from own measured values and external values (proportions can be set in percentage)
- Display 1-3 rows (own values or values received from the bus) or display of temperature control (see Mode display and manual temperature controller)
- 2 push buttons. Configuration as bus push button or for changing ambient temperature and switching between operating modes (see Change ambient temperature with the buttons)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- PI controller for ventilation depending on humidity and VOC concentration: dehumidification/humidification (one step) or dehumidification (one or two step)
- Threshold values can be adjusted per parameter or via communication objects: 3 × temperature, 2 × humidity, 4 × VOC
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum or average values. Each with 5 inputs (for values received via communication objects)
- Configuration is made using the KNX software ETS 5
Housing | Plastic material |
Colours | • similar to RAL 9005 jet black • similar to RAL 9010 pure white |
Mounting | In-wall (wall mounting in socket Ø 60 mm, 42 mm deep, resp. cavity wall socket for hole Ø 68 mm) |
Protection category | IP 20 |
Dimensions | Housing approx. 60 x 60 (W x H, mm), mounting depth approx. 8 mm, base plate approx. 71 x 71 (W x H, mm) |
Total weight | approx. 68 g |
Ambient temperature | Operation 0…+50°C, storage -10…+60°C |
Ambient air humidity | min. 10% RH, max. 95% RH, avoid bedewing |
Operating voltage | KNX bus voltage |
Bus current | max. 20 mA |
Data output | KNX +/- bus terminal plug |
Communication objects | 224 |
VOC measurement range | 400...2000 ppm |
Temperature measurement range | 0…+50°C |
Humidity measurement range | 0% RH …95% RH |
- Housing with display
- Mounting adapter with screws
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for Swiss nstallation standard
- Inlet box
Filter by language:
RTF
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages:
Item No.: 70972, 70974
Languages: