KNX TH-UP Touch CH
Sensor and controller for temperature, humidity
Combined indoor sensor for KNX with sensors for temperature and humidity. With display/touch buttons, controller for heating and ventilation
- Room controller with display and touch buttons
- Heating control and ventilation control
- Glass surface
- Integrated sensors
The Sensor KNX TH-UP Touch CH measures temperature and humidity and calculates the dew point. The sensor can receive external measured values via the bus and process them with the own data to overall values (mixed values, e. g. room average).
The KNX TH-UP Touch CH offers two push buttons that may be used for changing the ambient temperature (target value), for switching between operating modes or as free programmable bus push buttons. The KNX TH-UP Touch CH provides switching outputs with adjustable threshold
values. The switching outputs and further communication objects can be linked by AND and OR logic gates.Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects.
Integrated PI controllers allows for control of a ventilation (depending on air humidity) and a heating/cooling system (depending on temperature). The KNX TH-UP Touch CH can emit a warning to the bus as soon as the area of optimum comfort (according to DIN 1946) is left. The integrated display shows the own values and data received from the bus (e.g. date, time).
The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
N° 70637 KNX TH-UP Touch CH, pure white RAL 9010
N° 70638 KNX TH-UP Touch CH, jet black RAL 9005
Delivery without frame
- Measurement of temperature and air humidity (absolute and relative),
calculation of the dew point - Mixed values from own measured values and external values (proportions
can be set in percentage) - Display 1-3 rows (own values or values received from the bus) or display of
temperature control (see Mode display and manual temperature controller) - 2 push buttons. Configuration as bus push button or for changing ambient
temperature and switching between operating modes (see Change ambient
temperature with the buttons) - PI controller for heating (one or two step) and cooling (one or two step)
depending on temperature. Control according to separate target values or
basic target temperature - PI controller for ventilation depending on humidity: dehumidification/
humidification (one step) or dehumidification (one or two step) - Threshold values can be adjusted per parameter or via communication
objects: 3 × temperature, 2 × humidity - 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident
as well as 16 logic inputs in the form of communication objects, may be used
as inputs for the logic gates. The output of each gate may optionally be
configured as 1 bit or 2 x 8 bits - 2 actuating variable comparators for output of minimum, maximum or
average values. Each with 5 inputs (for values received via communication
objects) - Configuration is made using the KNX software ETS
| Housing | Glass, plastic material |
| Colours | • similar to RAL 9010 pure white • similar to RAL 9005 jet black |
| Mounting | Installation in inlet box |
| Protection category | IP 20 |
| Dimensions | Housing approx. 60x 60 (W x H, mm), mounting depth approx. 8 mm |
| Total weight | approx. 60 g |
| Ambient temperature | Operation 0…+55°C, storage -10…+60°C |
| Ambient air humidity | max. 5... 95% RH, avoid bedewing |
| Operating voltage | KNX bus voltage |
| Bus current | max. 10 mA |
| Data output | KNX +/- bus terminal plug |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | 186 |
| Temperature measurement range | 0…+50°C |
| Humidity measurement range | 0% RH …95% RH |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Housing with display
- Mounting adapter with screws
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Inlet box
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for swiss
installation standard
Filter by language:
RTF
Item No.: 70638, 70637
Languages:
ZIP
Item No.: 70616, 70617, 70638, 70637
Languages:
- Room controller with display and touch buttons
- Heating control and ventilation control
- Glass surface
- Integrated sensors
The Sensor KNX TH-UP Touch CH measures temperature and humidity and calculates the dew point. The sensor can receive external measured values via the bus and process them with the own data to overall values (mixed values, e. g. room average).
The KNX TH-UP Touch CH offers two push buttons that may be used for changing the ambient temperature (target value), for switching between operating modes or as free programmable bus push buttons. The KNX TH-UP Touch CH provides switching outputs with adjustable threshold
values. The switching outputs and further communication objects can be linked by AND and OR logic gates.Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects.
Integrated PI controllers allows for control of a ventilation (depending on air humidity) and a heating/cooling system (depending on temperature). The KNX TH-UP Touch CH can emit a warning to the bus as soon as the area of optimum comfort (according to DIN 1946) is left. The integrated display shows the own values and data received from the bus (e.g. date, time).
The device is completed with a frame of the switching series installed in the building and thus merges with the interior.
Models:
N° 70637 KNX TH-UP Touch CH, pure white RAL 9010
N° 70638 KNX TH-UP Touch CH, jet black RAL 9005
Delivery without frame
- Measurement of temperature and air humidity (absolute and relative),
calculation of the dew point - Mixed values from own measured values and external values (proportions
can be set in percentage) - Display 1-3 rows (own values or values received from the bus) or display of
temperature control (see Mode display and manual temperature controller) - 2 push buttons. Configuration as bus push button or for changing ambient
temperature and switching between operating modes (see Change ambient
temperature with the buttons) - PI controller for heating (one or two step) and cooling (one or two step)
depending on temperature. Control according to separate target values or
basic target temperature - PI controller for ventilation depending on humidity: dehumidification/
humidification (one step) or dehumidification (one or two step) - Threshold values can be adjusted per parameter or via communication
objects: 3 × temperature, 2 × humidity - 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident
as well as 16 logic inputs in the form of communication objects, may be used
as inputs for the logic gates. The output of each gate may optionally be
configured as 1 bit or 2 x 8 bits - 2 actuating variable comparators for output of minimum, maximum or
average values. Each with 5 inputs (for values received via communication
objects) - Configuration is made using the KNX software ETS
| Housing | Glass, plastic material |
| Colours | • similar to RAL 9010 pure white • similar to RAL 9005 jet black |
| Mounting | Installation in inlet box |
| Protection category | IP 20 |
| Dimensions | Housing approx. 60x 60 (W x H, mm), mounting depth approx. 8 mm |
| Total weight | approx. 60 g |
| Ambient temperature | Operation 0…+55°C, storage -10…+60°C |
| Ambient air humidity | max. 5... 95% RH, avoid bedewing |
| Operating voltage | KNX bus voltage |
| Bus current | max. 10 mA |
| Data output | KNX +/- bus terminal plug |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | 186 |
| Temperature measurement range | 0…+50°C |
| Humidity measurement range | 0% RH …95% RH |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Housing with display
- Mounting adapter with screws
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Inlet box
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for swiss
installation standard
Filter by language:
Item No.: 70638, 70637
Languages:
Item No.: 70638, 70637
Languages:
RTF
Item No.: 70638, 70637
Languages:
Item No.: 70638, 70637
Languages:
Item No.: 70638, 70637
Languages:
Item No.: 70638, 70637
Languages:
Item No.: 70638, 70637
Languages:
Item No.: 70638, 70637
Languages:
Item No.: 70638, 70637
Languages:
Item No.: 70638, 70637
Languages:
Item No.: 70638, 70637
Languages:
ZIP
Item No.: 70616, 70617, 70638, 70637
Languages: