Cala Touch KNX AQS/TH 3.x CH
Room Controller, CO2/Temperature/Humidity Sensor
KNX touch controller with sensor and control functions
Highlights
-
-
Colour touch display with display and operating pages
-
-
Human Centric Lighting, colour temperature and RGB light control
-
-
Light Switching or dimming
- - Operation of drives (shading, windows)
The Room Controller Cala Touch KNX AQS/TH CH for the KNX bus system measures room temperature, humidity and air quality. Via the bus, the indoor sensor can receive external values and process them further with its own data to a total value (mixed value, e.g. room average). All measured values can be used for the control of threshold value-dependent switching outputs. States can be linked via AND logic gates and OR logic gates. Multifunctional modules change input data as required by means of calculations, querying a condition, or converting the data point type. In addition, an integrated manipulated variable comparator can compare and output variables that were received via communication objects. Integrated PI-controllers control ventilation (according to humidity or CO2-concentration) and/or heating/cooling (according to temperature), depending on the respective model. Cala Touch KNX AQS/TH CH features a touch display that shows various display and control pages depending on the individual configuration. There is one page available that shows the current measured values, a menu area to adjust device settings and pages with touch control elements for internal temperature control, for light (manual switching or dimming), for shades or windows (manual operation). Cala Touch KNX AQS/TH CH is supplemented with a frame of the switch series used in buildings, and thus fits seamlessly into the interior fittings.
Models:
N° 70821 Cala Touch KNX AQS/TH CH, pure white RAL 9010 with temperature, humidity and CO2-sensor
N° 70823 Cala Touch KNX AQS/TH CH, jet black RAL 9005 with temperature, humidity and CO2-sensor
Delivery without frame
- Measuring the CO2-concentration of the air, the temperature and air humidity (relative, absolute), each with mixed value calculation. The share of internal measurement value and external value can be set as a percentage
- Bus message, whether the values for temperature and air humidity are within the comfort field (DIN 1946). Dew point calculation
- Threshold values can be adjusted per parameter or via communication objects
- PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate set points or basic set point temperature. Fan coil control
- PI controller for ventilation according to humidity and CO2-concentration: Ventilate/Air (one-level) or Ventilate (one or two-levels)
- Colour touch display with display and operating pages for
- 1× display of current measured values
- 1× display of bus data (4 universal spaces)
- 1× temperature control (incl. mode change, indication whether heating/cooling active); can also be used as an extension unit for operating another controller
- 3× drive operation (shading, window) with buttons, slider, position display (incl. slat position)
- 3× switching or dimming of light (with percentage display)
- 1× RGB light control
- 1× light color temperature setting
- 1× HCL control (adaption of light color temperature over adjustable periods of time)
- 1× scenes (4 scenes with recall, storage, status indication)
- weekly timer switch with 8 periods
- 2× info page (each displays 2 text objects)
- device settings - Screen saver (clock, clock/indoor/outdoor temperature alternately, off) may be switched on or off
- Key tone may be switched on or off
- 4 inputs for binary contacts or T-NTC temperature sensor.
- 8 AND and 8 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 8 multi-function modules (computers) for changing the input data by calculations, by querying a condition or by converting the data point type
- 4 manipulated variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Summer compensation for cooling systems. A characteristic curve matches the target temperature in the room to the external temperature and sets the minimum and maximum target temperature values
- Configuration is made using the KNX software ETS
Material | Real glass, plastic |
Display | Visible diagonal: 2.3 inch (59 mm) Resolution: 320 × 240 pixel |
Colours | • white glass, white housing (pure white RAL 9010) • black glass, black housing (jet black RAL 9005) |
Assembly | Installation in inlet box |
Degree of protection | IP 20 |
Dimensions | approx. 60 × 60 (W × H × D, mm), mounting depth approx. 8 mm |
Total weight | approx. 70 g (including mounting adapter) |
Ambient temperature | Operation 0...+55°C, storage -30…+70°C |
Ambient humidity | max. 5...95% RH, avoid condensation |
Operating voltage | KNX bus voltage |
Bus current | max. 18 mA |
Data output | KNX +/- bus connector terminal |
Group addresses | max. 2000 |
Assignments | max. 2000 |
Communication objects | 471 |
Inputs | 4× analogue/ digital, max. cable length 10 m. |
measuring range T-NTC temperature sensor on Cala input | -40°C...+80°C |
CO2-measuring range | 400...10,000 ppm |
Temperature measuring range | 0…+55°C |
Humidity measuring range | 5% rF …95% rF |
- Housing with display
- Mounting adapter with screws
- Analogue/digital supply line
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Inlet box
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for swiss installation standard
Filter by language:
RTF
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
The Room Controller Cala Touch KNX AQS/TH CH for the KNX bus system measures room temperature, humidity and air quality. Via the bus, the indoor sensor can receive external values and process them further with its own data to a total value (mixed value, e.g. room average). All measured values can be used for the control of threshold value-dependent switching outputs. States can be linked via AND logic gates and OR logic gates. Multifunctional modules change input data as required by means of calculations, querying a condition, or converting the data point type. In addition, an integrated manipulated variable comparator can compare and output variables that were received via communication objects. Integrated PI-controllers control ventilation (according to humidity or CO2-concentration) and/or heating/cooling (according to temperature), depending on the respective model. Cala Touch KNX AQS/TH CH features a touch display that shows various display and control pages depending on the individual configuration. There is one page available that shows the current measured values, a menu area to adjust device settings and pages with touch control elements for internal temperature control, for light (manual switching or dimming), for shades or windows (manual operation). Cala Touch KNX AQS/TH CH is supplemented with a frame of the switch series used in buildings, and thus fits seamlessly into the interior fittings.
Models:
N° 70821 Cala Touch KNX AQS/TH CH, pure white RAL 9010 with temperature, humidity and CO2-sensor
N° 70823 Cala Touch KNX AQS/TH CH, jet black RAL 9005 with temperature, humidity and CO2-sensor
Delivery without frame
- Measuring the CO2-concentration of the air, the temperature and air humidity (relative, absolute), each with mixed value calculation. The share of internal measurement value and external value can be set as a percentage
- Bus message, whether the values for temperature and air humidity are within the comfort field (DIN 1946). Dew point calculation
- Threshold values can be adjusted per parameter or via communication objects
- PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate set points or basic set point temperature. Fan coil control
- PI controller for ventilation according to humidity and CO2-concentration: Ventilate/Air (one-level) or Ventilate (one or two-levels)
- Colour touch display with display and operating pages for
- 1× display of current measured values
- 1× display of bus data (4 universal spaces)
- 1× temperature control (incl. mode change, indication whether heating/cooling active); can also be used as an extension unit for operating another controller
- 3× drive operation (shading, window) with buttons, slider, position display (incl. slat position)
- 3× switching or dimming of light (with percentage display)
- 1× RGB light control
- 1× light color temperature setting
- 1× HCL control (adaption of light color temperature over adjustable periods of time)
- 1× scenes (4 scenes with recall, storage, status indication)
- weekly timer switch with 8 periods
- 2× info page (each displays 2 text objects)
- device settings - Screen saver (clock, clock/indoor/outdoor temperature alternately, off) may be switched on or off
- Key tone may be switched on or off
- 4 inputs for binary contacts or T-NTC temperature sensor.
- 8 AND and 8 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 8 multi-function modules (computers) for changing the input data by calculations, by querying a condition or by converting the data point type
- 4 manipulated variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Summer compensation for cooling systems. A characteristic curve matches the target temperature in the room to the external temperature and sets the minimum and maximum target temperature values
- Configuration is made using the KNX software ETS
Material | Real glass, plastic |
Display | Visible diagonal: 2.3 inch (59 mm) Resolution: 320 × 240 pixel |
Colours | • white glass, white housing (pure white RAL 9010) • black glass, black housing (jet black RAL 9005) |
Assembly | Installation in inlet box |
Degree of protection | IP 20 |
Dimensions | approx. 60 × 60 (W × H × D, mm), mounting depth approx. 8 mm |
Total weight | approx. 70 g (including mounting adapter) |
Ambient temperature | Operation 0...+55°C, storage -30…+70°C |
Ambient humidity | max. 5...95% RH, avoid condensation |
Operating voltage | KNX bus voltage |
Bus current | max. 18 mA |
Data output | KNX +/- bus connector terminal |
Group addresses | max. 2000 |
Assignments | max. 2000 |
Communication objects | 471 |
Inputs | 4× analogue/ digital, max. cable length 10 m. |
measuring range T-NTC temperature sensor on Cala input | -40°C...+80°C |
CO2-measuring range | 400...10,000 ppm |
Temperature measuring range | 0…+55°C |
Humidity measuring range | 5% rF …95% rF |
- Housing with display
- Mounting adapter with screws
- Analogue/digital supply line
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Inlet box
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for swiss installation standard
Filter by language:
RTF
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages: