KNX T-UP basic, white
KNX Temperature Sensor
KNX Indoor Temperature Sensor with Controller for Heating
The Temperature sensor KNX T-UP basic measures the room temperature. Via the bus, the sensor receives an external measuring value and processes it to an overall temperature (composite result) together with its own data.
The KNX T-UP basic provides three switched outputs whose threshold values can be adjusted. Switched outputs and other communication objects may be linked via AND and OR logic gates. In addition, an integrated control variable comparator compares and outputs variables that were received via communication objects. The sensor features a PI control for heating and cooling.
The housing is supplemented with a frame of the switch series used in buildings, and thus fits seamlessly into the interior fittings.
- Temperature measurements
- Composite value from own measured value and external value (proportions are adjusted as a percentage)
- PI-controller for heating (one or two-stage) and cooling (one or two-stage) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) are used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 control variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Configuration is made using the KNX software ETS"
General |
|
| Housing | Plastic |
| Colours | White, glossy (similar to RAL 9016 Traffic White) |
| Assembly | on device socket according to DIN 49073 |
| Dimensions | Housing approx. 55 x 55 (W x H, mm), Installation via socket approx. 18.5 mm, Total depth approx. 25.5 mm, Baseplate approx. 71 x 71 (W x H, mm), |
| Total weight | approx. 45 g |
| Ambient temperature | -5…+45 |
| Ambient humidity | max. 95% RH, non-condensing |
| Storage temperature | -40…+85°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
KNX bus |
|
| KNX medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses | max. 254 |
| Assignments | max. 254 |
| Communication objects | 151 |
| Nominal voltage KNX | 30 V DC SELV |
| Power consumption KNX | max. 10 mA |
| Connection | KNX plug terminals |
| Duration after bus voltage restoration until data is received | approx. 5 seconds |
Sensors |
|
| Measurement range | -25…+80°C |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
-
Housing with sensor PCB
-
Base frame
-
Data sheet with installation instruction (German, English, French, Italian, Spanish)
Additionally required (not included in the deliverables):
- Device socket according to DIN 49073
- Frame (for insert 55 x 55 mm), compatible with the switch scheme used in the building
Filter by language:
RTF
ZIP
Item No.: 70350
Languages:
ZIP
Item No.: 70350
Languages:
ZIP
Item No.: 70350
Languages:
Item No.: 70350
Languages:
The Temperature sensor KNX T-UP basic measures the room temperature. Via the bus, the sensor receives an external measuring value and processes it to an overall temperature (composite result) together with its own data.
The KNX T-UP basic provides three switched outputs whose threshold values can be adjusted. Switched outputs and other communication objects may be linked via AND and OR logic gates. In addition, an integrated control variable comparator compares and outputs variables that were received via communication objects. The sensor features a PI control for heating and cooling.
The housing is supplemented with a frame of the switch series used in buildings, and thus fits seamlessly into the interior fittings.
- Temperature measurements
- Composite value from own measured value and external value (proportions are adjusted as a percentage)
- PI-controller for heating (one or two-stage) and cooling (one or two-stage) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) are used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 control variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Configuration is made using the KNX software ETS"
General |
|
| Housing | Plastic |
| Colours | White, glossy (similar to RAL 9016 Traffic White) |
| Assembly | on device socket according to DIN 49073 |
| Dimensions | Housing approx. 55 x 55 (W x H, mm), Installation via socket approx. 18.5 mm, Total depth approx. 25.5 mm, Baseplate approx. 71 x 71 (W x H, mm), |
| Total weight | approx. 45 g |
| Ambient temperature | -5…+45 |
| Ambient humidity | max. 95% RH, non-condensing |
| Storage temperature | -40…+85°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
KNX bus |
|
| KNX medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses | max. 254 |
| Assignments | max. 254 |
| Communication objects | 151 |
| Nominal voltage KNX | 30 V DC SELV |
| Power consumption KNX | max. 10 mA |
| Connection | KNX plug terminals |
| Duration after bus voltage restoration until data is received | approx. 5 seconds |
Sensors |
|
| Measurement range | -25…+80°C |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
-
Housing with sensor PCB
-
Base frame
-
Data sheet with installation instruction (German, English, French, Italian, Spanish)
Additionally required (not included in the deliverables):
- Device socket according to DIN 49073
- Frame (for insert 55 x 55 mm), compatible with the switch scheme used in the building
Filter by language:
RTF
Item No.: 70350, 70358
Languages:
Item No.: 70350
Languages:
Item No.: 70350
Languages:
Item No.: 70350
Languages:
Item No.: 70350
Languages:
Item No.: 70350
Languages:
Item No.: 70350
Languages:
Item No.: 70350
Languages:
Item No.: 70350
Languages:
Item No.: 70350
Languages:
Item No.: 70350
Languages:
ZIP
Item No.: 70350
Languages:
ZIP
Item No.: 70350
Languages:
ZIP
Item No.: 70350
Languages:
Item No.: 70350
Languages: