Cala KNX T 101 CH
Room Temperature Controller
KNX heating controller with temperature sensor
Highlights
-
-
Heating controller/thermostat
-
-
Glass surface with temperature display and +/- touch keys
- - Pushbutton for sun protection (e.g. blind, roller shutter, awning)
The Cala KNX T 101 CH has got an integrated PI controller for a heating and a cooling system (one or two step). The room temperature is adjusted by means of the „+" and „-" touch buttons.
The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.
Models:
N° 70981 Cala KNX T 101 CH, white
N° 70983 Cala KNX T 101 CH, black
Delivery without frame
- Measurement of temperature. Mixed value from own measured value and external values (proportions can be set in percentage), output of minimum and maximum values
- Display of the actual value or the target value/basic setpoint shift
- 2 touch buttons (+/-) for adjustment of the room temperature
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Configuration is made using the KNX software ETS 5
General: | |
Casing | Genuine glass, plastic, metal |
Casing colour (similar) | RAL 9010 (white) RAL 9005 (black) |
Degree of protection (after assem-bly) | IP20 |
Size (W × H) Mounting depth |
60mm × 60mm ≥ 10mm |
Total weight | ≈ 50g |
Ambient temperature | -5…+45°C |
Ambient humidity (RH) (non-condensing) |
0...95% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 183 |
Assignments max. | 183 |
Communication objects | 41 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 15mA |
Connection KNX plug-in terminals |
Conductor diameter: 0.6…0.8mm s Stripping length: 5mm |
Duration after bus voltage restora-tion until data is received | ≈ 5s |
Sensors: | |
Temperature measurement range | -5…+60°C |
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download•
- Room temperature controller in casing
- Mounting adapter with screws
Additionally required (not included in the deliverables):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for Swiss installation standard
- Inlet box
Filter by language:
RTF
Item No.: 70983, 70980
Languages:
Item No.: 70981, 70983
Languages:
The Cala KNX T 101 CH has got an integrated PI controller for a heating and a cooling system (one or two step). The room temperature is adjusted by means of the „+" and „-" touch buttons.
The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.
Models:
N° 70981 Cala KNX T 101 CH, white
N° 70983 Cala KNX T 101 CH, black
Delivery without frame
- Measurement of temperature. Mixed value from own measured value and external values (proportions can be set in percentage), output of minimum and maximum values
- Display of the actual value or the target value/basic setpoint shift
- 2 touch buttons (+/-) for adjustment of the room temperature
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Configuration is made using the KNX software ETS 5
General: | |
Casing | Genuine glass, plastic, metal |
Casing colour (similar) | RAL 9010 (white) RAL 9005 (black) |
Degree of protection (after assem-bly) | IP20 |
Size (W × H) Mounting depth |
60mm × 60mm ≥ 10mm |
Total weight | ≈ 50g |
Ambient temperature | -5…+45°C |
Ambient humidity (RH) (non-condensing) |
0...95% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 183 |
Assignments max. | 183 |
Communication objects | 41 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 15mA |
Connection KNX plug-in terminals |
Conductor diameter: 0.6…0.8mm s Stripping length: 5mm |
Duration after bus voltage restora-tion until data is received | ≈ 5s |
Sensors: | |
Temperature measurement range | -5…+60°C |
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download•
- Room temperature controller in casing
- Mounting adapter with screws
Additionally required (not included in the deliverables):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for Swiss installation standard
- Inlet box
Filter by language:
RTF
Item No.: 70983, 70980
Languages:
Item No.: 70983, 70980
Languages:
Item No.: 70983, 70980
Languages:
Item No.: 70983, 70980
Languages:
Item No.: 70983, 70980
Languages:
Item No.: 70983, 70980
Languages:
Item No.: 70981, 70983
Languages: