Cala KNX T 201/202 Sunblind CH
Temperature Controller, Button for Shading
KNX heating controller with temperature sensor, blind operation/sun protection operation
- Heating controller/thermostat
- Glass surface with temperature display and +/- touch keys
- Pushbutton for sun protection (e.g. blind, roller shutter, awning)
The Cala KNX T 201/202 Sunblind CH push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and solar protection. White LEDs are integrated in these areas and their behaviour can be adjusted.
A temperature sensor is integrated into Cala KNX T 201/202 Sunblind CH. An external temperature reading can be received via the bus and processed with ist own data to create a total temperature (mixed value).
The Cala KNX T 201/202 Sunblind CH has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons.
Communication objects can be linked via AND and OR logic gates.
The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.
Models:
N° 70991 Cala KNX T 201 Sunblind CH, white
N° 70993 Cala KNX T 201 Sunblind CH, black
N° 71051 Cala KNX T 202 Sunblind CH, white
N° 71053 Cala KNX T 202 Sunblind CH, black
Delivery without frame
- Operating zone for temperature control with 2 areas (warmer, cooler)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- Configuration is made using the KNX software ETS 5
Additional functions Cala KNX T 201 Sunblind CH:
- 1 operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Additional functions Cala KNX T 202 Sunblind CH:
- 2 operating zones for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
| General: | |
| Casing Genuine glass, plastic, metal | |
| Casing colour (similar) | RAL 9010 (white) RAL 9005 (black) |
| Degree of protection (after assem-bly) | IP20 |
| Size (W × H) Mounting depth |
60mm × 60mm ≥ 10mm |
| Total weight | ≈ 50g |
| Ambient temperature | -5…+45°C |
| Ambient humidity (RH) (non-condensing) |
0...95% |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 167 |
| Assignments max. | 167 |
| Communication objects | Cala KNX T 201: 92 Cala KNX T 202: 98 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 20 mA |
| Connection KNX plug-in terminals Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5s |
| Sensors: | |
| Temperature measurement range | -5…+60°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
- Push button in casing
- Mounting adapter with screws
Additionally required (not included in the deliverables):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for Swiss installation standard
- Inlet box
Filter by language:
RTF
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages:
- Heating controller/thermostat
- Glass surface with temperature display and +/- touch keys
- Pushbutton for sun protection (e.g. blind, roller shutter, awning)
The Cala KNX T 201/202 Sunblind CH push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and solar protection. White LEDs are integrated in these areas and their behaviour can be adjusted.
A temperature sensor is integrated into Cala KNX T 201/202 Sunblind CH. An external temperature reading can be received via the bus and processed with ist own data to create a total temperature (mixed value).
The Cala KNX T 201/202 Sunblind CH has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons.
Communication objects can be linked via AND and OR logic gates.
The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.
Models:
N° 70991 Cala KNX T 201 Sunblind CH, white
N° 70993 Cala KNX T 201 Sunblind CH, black
N° 71051 Cala KNX T 202 Sunblind CH, white
N° 71053 Cala KNX T 202 Sunblind CH, black
Delivery without frame
- Operating zone for temperature control with 2 areas (warmer, cooler)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- Configuration is made using the KNX software ETS 5
Additional functions Cala KNX T 201 Sunblind CH:
- 1 operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Additional functions Cala KNX T 202 Sunblind CH:
- 2 operating zones for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
| General: | |
| Casing Genuine glass, plastic, metal | |
| Casing colour (similar) | RAL 9010 (white) RAL 9005 (black) |
| Degree of protection (after assem-bly) | IP20 |
| Size (W × H) Mounting depth |
60mm × 60mm ≥ 10mm |
| Total weight | ≈ 50g |
| Ambient temperature | -5…+45°C |
| Ambient humidity (RH) (non-condensing) |
0...95% |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 167 |
| Assignments max. | 167 |
| Communication objects | Cala KNX T 201: 92 Cala KNX T 202: 98 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 20 mA |
| Connection KNX plug-in terminals Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5s |
| Sensors: | |
| Temperature measurement range | -5…+60°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
- Push button in casing
- Mounting adapter with screws
Additionally required (not included in the deliverables):
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for Swiss installation standard
- Inlet box
Filter by language:
RTF
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages:
Item No.: 70991, 70993
Languages: