Cala KNX T 201/202 Sunblind
Temperature Controller, Button for Shading
KNX heating controller with temperature sensor, blind operation/sun protection operation
- Heating controller/thermostat
- Glass surface with temperature display and +/- touch keys
- Pushbutton for sun protection (e.g. blind, roller shutter, awning
The Cala KNX T 201/202 Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and solar protection. White LEDs are integrated in these areas and their behaviour can be adjusted.
A temperature sensor is integrated into Cala KNX T 201/202 Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
The Cala KNX T 201/202 Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons.
Communication objects can be linked via AND and OR logic gates.
The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.
Models:
N° 70990 Cala KNX T 201 Sunblind, white
N° 70992 Cala KNX T 201 Sunblind, black
N° 71050 Cala KNX T 202 Sunblind, white
N° 71052 Cala KNX T 202 Sunblind, black
Delivery without frame
- Operating zone for temperature control with 2 areas (warmer, cooler)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Additional functions Cala KNX T 201 Sunblind:
- 1 operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Additional functions Cala KNX T 202 Sunblind:
- 2 operating zones for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Configuration is made using the KNX software ETS 5.
| General: | |
| Casing | Genuine glass, plastic, metal |
| Casing colour (similar) | RAL 9010 (white) RAL 9005 (black) |
| Degree of protection; conductor diameter | IP20 |
| Size (W × H × D) Supporting ring (W × H) Mounting depth |
55mm × 55mm × 35mm 71 mm × 71 mm ≈ 7mm |
| Total weight | ≈ 50g |
| Ambient temperature | -5…+45°C |
| Ambient humidity (RH) (non-condensing) |
0...95% |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 167 |
| Assignments max. | 167 |
| Communication objects | Cala KNX T 201: 92 Cala KNX T 202: 98 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 20 mA |
| Connection KNX plug-in terminals |
Conductor diameter: 0.6…0.8mm s Stripping length: 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5s |
| Sensors: | |
| Temperature measurement range | -5…+60°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Push button in casing
- Supporting ring
- KNX plug-in terminal
- Data sheet with installation instructions (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Accessories required:
- Suitable, windproof device socket
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building
Filter by language:
RTF
Item No.: 70992, 70990
Languages:
Item No.: 70992, 70990
Languages:
Item No.: 70992, 70990
Languages:
Item No.: 70992, 70990
Languages:
ZIP
Item No.: 70992, 70990
Languages:
ZIP
Item No.: 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70973, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71050, 71052
Languages:
ZIP
Item No.: 71390, 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70970, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71380, 71050, 71052
Languages:
- Heating controller/thermostat
- Glass surface with temperature display and +/- touch keys
- Pushbutton for sun protection (e.g. blind, roller shutter, awning
The Cala KNX T 201/202 Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and solar protection. White LEDs are integrated in these areas and their behaviour can be adjusted.
A temperature sensor is integrated into Cala KNX T 201/202 Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
The Cala KNX T 201/202 Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons.
Communication objects can be linked via AND and OR logic gates.
The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.
Models:
N° 70990 Cala KNX T 201 Sunblind, white
N° 70992 Cala KNX T 201 Sunblind, black
N° 71050 Cala KNX T 202 Sunblind, white
N° 71052 Cala KNX T 202 Sunblind, black
Delivery without frame
- Operating zone for temperature control with 2 areas (warmer, cooler)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Additional functions Cala KNX T 201 Sunblind:
- 1 operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Additional functions Cala KNX T 202 Sunblind:
- 2 operating zones for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Configuration is made using the KNX software ETS 5.
| General: | |
| Casing | Genuine glass, plastic, metal |
| Casing colour (similar) | RAL 9010 (white) RAL 9005 (black) |
| Degree of protection; conductor diameter | IP20 |
| Size (W × H × D) Supporting ring (W × H) Mounting depth |
55mm × 55mm × 35mm 71 mm × 71 mm ≈ 7mm |
| Total weight | ≈ 50g |
| Ambient temperature | -5…+45°C |
| Ambient humidity (RH) (non-condensing) |
0...95% |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 167 |
| Assignments max. | 167 |
| Communication objects | Cala KNX T 201: 92 Cala KNX T 202: 98 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 20 mA |
| Connection KNX plug-in terminals |
Conductor diameter: 0.6…0.8mm s Stripping length: 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5s |
| Sensors: | |
| Temperature measurement range | -5…+60°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Push button in casing
- Supporting ring
- KNX plug-in terminal
- Data sheet with installation instructions (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Accessories required:
- Suitable, windproof device socket
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building
Filter by language:
RTF
Item No.: 70992, 70990
Languages:
Item No.: 70992, 70990
Languages:
Item No.: 70992, 70990
Languages:
Item No.: 70992, 70990
Languages:
Item No.: 70992, 70990
Languages:
Item No.: 70992, 70990
Languages:
Item No.: 70992, 70990
Languages:
ZIP
Item No.: 70992, 70990
Languages:
ZIP
Item No.: 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70973, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71050, 71052
Languages:
ZIP
Item No.: 71390, 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70970, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71380, 71050, 71052
Languages: