Windancer KNX(-GPS)
Weather station with cup anemometer
KNX weather stations with sensors for brightness, wind, precipitation, temperature. Logic gate. Optionally with time reception (position of the sun), shading control, timer.
as low as
€331.20
as low as
incl. 19% VAT, excl. shipping
Item No.:
Item No.: 00459
Item No.:
Item No.: 00459
Description
The Windancer KNX(-GPS) weather station for the KNX building bus system measures temperature, wind speed, brightness and detects precipitation. All values can be used to control limit-dependent switching outputs. The states can be linked via AND logic gates and OR logic gates.
The Windancer KNX-GPS model additionally receives the GPS signal for time and location and calculates the exact position of the sun (azimuth and elevation). The integrated shading control allows the intelligent control of the sun protection of up to eight façades.
Find out more about the use of Windancer KNX weather stations
Functions
Functions of both models:
- Wind measurement with stable cup anemometer (up to 200 km/h under laboratory conditions)
- Precipitation detection: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends
- Temperature measurement
- Switching outputs for all measured values. Threshold values can be adjusted per parameter or via communication objects
- 6 AND and 6 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output of each gate can be configured optionally as 1-bit or 2 x 8-bit
Functionel adicional Windancer KNX:
- Brightness measurement (current illuminance). Measurement with 3 separate sensors (east, south, west). Separate threshold values for night
Functionel adicional Windancer KNX-GPS:
- Brightness measurement (current illuminance). Measurement with 3 separate sensors, output of the current highest value (one maximum value). Separate threshold values for night
- GPS receiver, outputting the current time and location coordinates. The Weather Station Windancer KNX-GPS also computes the position of the sun (azimuth and elevation)
- Shade control for up to 8 façades with slat tracking and shadow edge tracking
- Weekly and calendar time switch: The weather station receives the time and date from the integrated GPS receiver. The weekly time switch switches up to 4 different periods per day. With the calendar time switch up to 3 additional time periods can be defined, in which up to 2 On/Off switches take place. The switching outputs can be used as communications objects. The switch times are set via parameters
Technical data
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall |
| Degree of protection | IP44 |
| Dimensions (W x H x D) | 113mm × 101mm × 225mm |
| Total weight | ≈ 260g |
| Ambient temperature | -25...+50°C |
| Storage temperature | -30...+70°C |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 254 |
| Assignments maximum | 254 |
| Communication objects | 254 (with GPS) / 201 (without GPS) |
| Power consumption | ≤ 20mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.8mm s 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5 s |
| Supply: | |
| Auxiliary supply | 24...30 V DC SELV |
| Auxiliary current [at] | ≤ 65mA [24 V DC] |
| Sensors: | |
| Measurement range temperature | -25...+50°C |
| Measurement range wind [at] | 2…30m/s [25 °C] |
| Measurement range brightness | 0 Lux … 150 000 Lux |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
Scope of delivery & Accessories
- Weather station
- 2x Stainless steel pan head screw, WN56, 4x50 mm, cross recess
- 2x dowel S 6
- 2x DIN 125 washer V2A, A4. 3 outer diameter 9 mm
- KNX plug-in terminal and plug-in terminal (white/yellow)
- Data sheet with installation instructions (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Accessory Items
Filter by language:
ZIP
Windancer KNX Application 1.0
Status: 07.10.2025
Item No.: 71235
Languages:
de, en, fr, it, es, pl
RTF
Windancer KNX(-GPS) Tender Specifications
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
en
Windancer KNX(-GPS) Installation
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
de, en, fr, it, es
ZIP
Windancer KNX-GPS Application 1.0
Status: 07.10.2025
Item No.: 71236
Languages:
de, en, fr, it, es, pl
ZIP
Windancer KNX-GPS Anwendungsbeispiel – Projekt & Info
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
de
ZIP
Windancer KNX-GPS Use Case – Project & Description
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
en
ZIP
Elsner Windancer Drawing
Status: 12.10.2023
Item No.: 71235, 71236
Languages:
de, en, fr, it, es
KNX Certificate Windancer KNX
Status: 04.12.2023
Item No.: 71235
Languages:
de, en, fr, it, es
KNX Certificate Windancer KNX-GPS
Status: 04.12.2023
Item No.: 71236
Languages:
de, en, fr, it, es
Windancer KNX(-GPS) Installation Chinese
Status: 10.07.2024
Item No.: 71235, 71236
Languages:
zhans
-
Description
-
Functions
-
Technical data
-
Scope of delivery & Accessories
-
Downloads
The Windancer KNX(-GPS) weather station for the KNX building bus system measures temperature, wind speed, brightness and detects precipitation. All values can be used to control limit-dependent switching outputs. The states can be linked via AND logic gates and OR logic gates.
The Windancer KNX-GPS model additionally receives the GPS signal for time and location and calculates the exact position of the sun (azimuth and elevation). The integrated shading control allows the intelligent control of the sun protection of up to eight façades.
Find out more about the use of Windancer KNX weather stations
Functions of both models:
- Wind measurement with stable cup anemometer (up to 200 km/h under laboratory conditions)
- Precipitation detection: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends
- Temperature measurement
- Switching outputs for all measured values. Threshold values can be adjusted per parameter or via communication objects
- 6 AND and 6 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output of each gate can be configured optionally as 1-bit or 2 x 8-bit
Functionel adicional Windancer KNX:
- Brightness measurement (current illuminance). Measurement with 3 separate sensors (east, south, west). Separate threshold values for night
Functionel adicional Windancer KNX-GPS:
- Brightness measurement (current illuminance). Measurement with 3 separate sensors, output of the current highest value (one maximum value). Separate threshold values for night
- GPS receiver, outputting the current time and location coordinates. The Weather Station Windancer KNX-GPS also computes the position of the sun (azimuth and elevation)
- Shade control for up to 8 façades with slat tracking and shadow edge tracking
- Weekly and calendar time switch: The weather station receives the time and date from the integrated GPS receiver. The weekly time switch switches up to 4 different periods per day. With the calendar time switch up to 3 additional time periods can be defined, in which up to 2 On/Off switches take place. The switching outputs can be used as communications objects. The switch times are set via parameters
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall |
| Degree of protection | IP44 |
| Dimensions (W x H x D) | 113mm × 101mm × 225mm |
| Total weight | ≈ 260g |
| Ambient temperature | -25...+50°C |
| Storage temperature | -30...+70°C |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 254 |
| Assignments maximum | 254 |
| Communication objects | 254 (with GPS) / 201 (without GPS) |
| Power consumption | ≤ 20mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.8mm s 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5 s |
| Supply: | |
| Auxiliary supply | 24...30 V DC SELV |
| Auxiliary current [at] | ≤ 65mA [24 V DC] |
| Sensors: | |
| Measurement range temperature | -25...+50°C |
| Measurement range wind [at] | 2…30m/s [25 °C] |
| Measurement range brightness | 0 Lux … 150 000 Lux |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Weather station
- 2x Stainless steel pan head screw, WN56, 4x50 mm, cross recess
- 2x dowel S 6
- 2x DIN 125 washer V2A, A4. 3 outer diameter 9 mm
- KNX plug-in terminal and plug-in terminal (white/yellow)
- Data sheet with installation instructions (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Accessory Items
Filter by language:
ZIP
Windancer KNX Application 1.0
Status: 07.10.2025
Item No.: 71235
Languages:
de, en, fr, it, es, pl
RTF
Windancer KNX(-GPS) Tender Specifications
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
en
Windancer KNX Handbuch
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
de
Windancer KNX(-GPS) Installation
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
de, en, fr, it, es
Windancer KNX Manual
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
en
Windancer KNX Manual
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
es
Windancer KNX Manuale
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
it
Windancer KNX Manuel
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
fr
ZIP
Windancer KNX-GPS Application 1.0
Status: 07.10.2025
Item No.: 71236
Languages:
de, en, fr, it, es, pl
ZIP
Windancer KNX-GPS Anwendungsbeispiel – Projekt & Info
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
de
ZIP
Windancer KNX-GPS Use Case – Project & Description
Status: 11.10.2023
Item No.: 71235, 71236
Languages:
en
ZIP
Elsner Windancer Drawing
Status: 12.10.2023
Item No.: 71235, 71236
Languages:
de, en, fr, it, es
KNX Certificate Windancer KNX
Status: 04.12.2023
Item No.: 71235
Languages:
de, en, fr, it, es
KNX Certificate Windancer KNX-GPS
Status: 04.12.2023
Item No.: 71236
Languages:
de, en, fr, it, es
Ausschreibungstext Windancer KNX-GPS
Status: 21.03.2024
Item No.: 71236
Languages:
de
Windancer KNX Manual Chinese
Status: 04.07.2024
Item No.: 71235, 71236
Languages:
, zhans
Windancer KNX(-GPS) Installation Chinese
Status: 10.07.2024
Item No.: 71235, 71236
Languages:
zhans
Share Shopping Cart
×