Solexa II Display
Additional Display for Radio Control
Display for Solexa II radio system
Functions and characteristics of the Solexa II display:
- Operating part with monochrome touch display, indoor temperature sensor and real-time clock. Fixed integrated battery with USB charging socket. The display has a wall bracket, but can also be used like a remote control
| Display: | |
| General: | |
| Casing | plastic |
| Colours | white/aluminium coloured painted |
| Degree of protection | IP20 |
| Visible diagonal | 126 mm |
| Dimensions (W × H × D) | 107 mm × 112 mm × 14 mm |
| Total weight | ≈ 170 g |
| Ambient temperature | 0…+45°C |
| RH (relative humidity), non-condensing |
5...95% |
| Storage temperature | -10...+50°C |
| Overvoltage category | III |
| Protection class | II |
| Pollution degree | 2 |
| Radio: | |
| Frequency range | 868.0...868.6 MHz |
| Transmission power | ≤ 25 mW |
| Supply: | |
| Voltage (Battery) | 3.8 V DC ⎓ |
| USB power supply unit | 5V / 400 mA |
| Sensors: | |
| Temperature measurement range | 0…+50°C |
| Weather station: | |
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall or pole |
| Degree of protection | IP44 |
| Dimensions (W x H x D) | 96 mm × 77 mm × 118 mm |
| Total weight | ≈ 260 g |
| Ambient temperature | -30…+50°C |
| Storage temperature | -30…+50°C |
| Supply: | |
| Voltage (Power supply unit must comply with EN 61558-1) | 230 V AC / 50 Hz |
| Power consumption | ≈ 5 W |
| Drive output: | |
| Normally open contact for 1 drive (up/down/N/PE) with integrated fuse |
Micro Contact (μ) T 5.0 AH |
| Maximum motor load on drive output | 500VA (2.17A) |
| Direction change pause | 1 s |
| Connection of supply and drive output: | On-wall or pole |
| Spring terminals Conductor cross-section • solid • fine-stranded • fine-stranded with ferrule Stripping length One wire per terminal Outer diameter cable |
0.5 …1.5 mm² 0.5…1.5 mm² 0.5…1.0 mm² 10 mm Ø ≤ 10 mm |
| Sensors: | |
| Heater rain sensor | ≈ 1.2 W |
| Measurement range temperature | -40...+80°C |
| Measurement range wind | 0…35 m/s |
| Measurement range brightness | 0 Lux … 150 000 Lux |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- Solexa II display (with wall bracket, 4 screw anchors 4 × 20 mm, 4 flat head screw 3 × 25 mm)
- USB cable 0.5 m (USB-A plug to USB-B micro plug)
- Data sheet with installation instruction German, English, French, Dutch)
- Manual (German, English, French, Dutch) as download
Filter by language:
RTF
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Functions and characteristics of the Solexa II display:
- Operating part with monochrome touch display, indoor temperature sensor and real-time clock. Fixed integrated battery with USB charging socket. The display has a wall bracket, but can also be used like a remote control
| Display: | |
| General: | |
| Casing | plastic |
| Colours | white/aluminium coloured painted |
| Degree of protection | IP20 |
| Visible diagonal | 126 mm |
| Dimensions (W × H × D) | 107 mm × 112 mm × 14 mm |
| Total weight | ≈ 170 g |
| Ambient temperature | 0…+45°C |
| RH (relative humidity), non-condensing |
5...95% |
| Storage temperature | -10...+50°C |
| Overvoltage category | III |
| Protection class | II |
| Pollution degree | 2 |
| Radio: | |
| Frequency range | 868.0...868.6 MHz |
| Transmission power | ≤ 25 mW |
| Supply: | |
| Voltage (Battery) | 3.8 V DC ⎓ |
| USB power supply unit | 5V / 400 mA |
| Sensors: | |
| Temperature measurement range | 0…+50°C |
| Weather station: | |
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall or pole |
| Degree of protection | IP44 |
| Dimensions (W x H x D) | 96 mm × 77 mm × 118 mm |
| Total weight | ≈ 260 g |
| Ambient temperature | -30…+50°C |
| Storage temperature | -30…+50°C |
| Supply: | |
| Voltage (Power supply unit must comply with EN 61558-1) | 230 V AC / 50 Hz |
| Power consumption | ≈ 5 W |
| Drive output: | |
| Normally open contact for 1 drive (up/down/N/PE) with integrated fuse |
Micro Contact (μ) T 5.0 AH |
| Maximum motor load on drive output | 500VA (2.17A) |
| Direction change pause | 1 s |
| Connection of supply and drive output: | On-wall or pole |
| Spring terminals Conductor cross-section • solid • fine-stranded • fine-stranded with ferrule Stripping length One wire per terminal Outer diameter cable |
0.5 …1.5 mm² 0.5…1.5 mm² 0.5…1.0 mm² 10 mm Ø ≤ 10 mm |
| Sensors: | |
| Heater rain sensor | ≈ 1.2 W |
| Measurement range temperature | -40...+80°C |
| Measurement range wind | 0…35 m/s |
| Measurement range brightness | 0 Lux … 150 000 Lux |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- Solexa II display (with wall bracket, 4 screw anchors 4 × 20 mm, 4 flat head screw 3 × 25 mm)
- USB cable 0.5 m (USB-A plug to USB-B micro plug)
- Data sheet with installation instruction German, English, French, Dutch)
- Manual (German, English, French, Dutch) as download
Filter by language:
RTF
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
Item No.: 10144, 10150
Languages:
