Solexa 230 V
Shading Control
Wireless shading control for an awning or blind
as low as
€453.00
as low as
incl. 19% VAT, excl. shipping
Item No.:
Item No.: 00300
Item No.:
Item No.: 00300
Description
The Solexa Shading Control is for opening and retracting an awning or blind dependently of light intensity and room temperature. Outdoor shadings are automatically protected from rain, wind and frost. These alarm functions can be switched off individually. If the blind or awning should not been shut completely by the automatic system setting of customized shading positions is possible. For blinds an additional slat opening angle can be programmed (reversing). A group control relay offers simultaneous control of several drives.
The drive that should be controlled is directly connected to the weather station, what minimizes the effort for cabling. The weather station and the battery-powered operation unit exchange their data and commands via radio. No cable is required for electricity supply or control data inside the building. So no cable needs to be installed in the rooms! Therefor the Solexa Shading Control is an ideal option for retrofitting.
Models:
N° 10110 Solexa 230 V, whiteN° 10130 Solexa 230 V, aluminium-coloured
N° 10131 Solexa 230 V, perl dark grey
Functions
- For an awning or a blind (230 V motor), parallel operation of several drives as a group possible (with group control relais). The drive is connected to the weather station
- Radio connection between weather station and control unit
- Control unit with display and keypad and integrated indoor temperature sensor
- Basic setting, adjustment of the automatic functions and manual operation with the control unit
- Rotational direction of the motor and operating direction (whether shading extends from top or from bottom) may be adjusted separately during the basic setting at the control unit
- Shading position for automatic mode can be adjusted (for ex. extend only half the way). Reversing of blinds (slats are tilted so that diffuse light can enter the room)
- Application as a central control possible (Control of IMSG 230 Motor Control Units)
- Connected drives can be operated with Remote Control Remo 8 or Pushbutton Interface RF-B2-UP (available separately)
- Colours operating unit: white matt (similar to RAL 9016 Traffic White), aluminium matt or pearl dark grey matt
Technical data
| Operating unit: | |
| General: | |
| Casing | Plastic material (partly lacquered) |
| Colours | • White matt (similar to RAL 9016 Traffic White) • Aluminium matt • Pearl dark grey matt |
| Degree of protection | IP20 |
| Size (W × H × D) | 103 mm × 98 mm × 28 mm |
| Total weight (including batteries) | ≈ 170 g |
| Ambient temperature | 0…+45°C |
| RH (relative humidity), non-condensing |
5...80 % |
| Storage temperature Operating unit | -10...+50°C |
| Storage temperature in the set | -10...+50°C |
| Overvoltage category | III |
| Protection class | II |
| Pollution degree | 2 |
| Radio: | |
| Frequency range | 868.0...868.6 MHz |
| Transmission power | max. 10 mW |
| Supply: | |
| Voltage battery / rechargeable battery | 2 × 1.2...1.5 V AA/Mignon |
| Sensors: | |
| Ambient temperature | 0…+50°C |
| Weather station: | |
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall or pole |
| Degree of protection | IP44 |
| Dimensions (W x H x D) | 96 mm × 76 mm × 118 mm |
| Total weight | ≈ 260 g |
| Ambient temperature | -30...+50°C |
| Storage temperature Weather station | -30...+70°C |
| Storage temperature in the set | -10...+50°C |
| Supply: | |
| Voltage | 110 V / 60 Hz 230 V / 50 Hz |
| Power consumption | ≤ 2 W |
| Drive output: | |
| Normally open contact for 1 drive (up/down/N/PE) with integrated fuse |
Micro Contact (μ) T 5.0 AH |
| Maximum motor load on drive output | 500VA (2.17A) |
| Direction change pause | 1 s |
| Connection of supply and drive output: | |
| Spring terminals Conductor cross-section solid Stripping length One wire per terminal Outer diameter cable |
0.5 …1.5 mm² 10 mm Ø ≤ 10 mm |
| Sensors: | |
| Measurement range temperature | -40...+80°C |
| Measurement range wind | 0…35 m/s |
| Measurement range brightness | 0 Lux … 150 000 Lux |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
Scope of delivery & Accessories
- Control unit for display of weather data, alarm messages and operational mode; with integrated keys; with integrated indoor temperature sensor
- 2 batteries 1.5 V
- Weather station for report of outdoor temperature, wind speed, precipitation and brightness; with combined mounting bracket for wall or pole mounting
- Manual (German, English, French, Italian, Dutch or Slovenian)
Accessories especially recommended for this product:
- 60511 Radio remote control Remo 8, white or
- 60512 Radio remote control Remo 8, aluminium coloured
Accessory Items
Filter by language:
RTF
Solexa/Arexa Tender Specifications
Status: 11.10.2023
Item No.: 10115, 10110, 10130, 10131
Languages:
en
ZIP
Elsner Weather Sensor / KNX PY / P03 Drawing
Status: 11.10.2023
Item No.: 10115, 30159, 701, 70119, 70157, 10110, 10130, 10131
Languages:
de, en, fr, it, es
Solexa 230 V Installation
Status: 23.07.2024
Item No.: 10110, 10130, 10131, 10112, 10111, 10121, 10122
Languages:
de, en, fr, it, nl
-
Description
-
Functions
-
Technical data
-
Scope of delivery & Accessories
-
Downloads
The Solexa Shading Control is for opening and retracting an awning or blind dependently of light intensity and room temperature. Outdoor shadings are automatically protected from rain, wind and frost. These alarm functions can be switched off individually. If the blind or awning should not been shut completely by the automatic system setting of customized shading positions is possible. For blinds an additional slat opening angle can be programmed (reversing). A group control relay offers simultaneous control of several drives.
The drive that should be controlled is directly connected to the weather station, what minimizes the effort for cabling. The weather station and the battery-powered operation unit exchange their data and commands via radio. No cable is required for electricity supply or control data inside the building. So no cable needs to be installed in the rooms! Therefor the Solexa Shading Control is an ideal option for retrofitting.
Models:
N° 10110 Solexa 230 V, whiteN° 10130 Solexa 230 V, aluminium-coloured
N° 10131 Solexa 230 V, perl dark grey
- For an awning or a blind (230 V motor), parallel operation of several drives as a group possible (with group control relais). The drive is connected to the weather station
- Radio connection between weather station and control unit
- Control unit with display and keypad and integrated indoor temperature sensor
- Basic setting, adjustment of the automatic functions and manual operation with the control unit
- Rotational direction of the motor and operating direction (whether shading extends from top or from bottom) may be adjusted separately during the basic setting at the control unit
- Shading position for automatic mode can be adjusted (for ex. extend only half the way). Reversing of blinds (slats are tilted so that diffuse light can enter the room)
- Application as a central control possible (Control of IMSG 230 Motor Control Units)
- Connected drives can be operated with Remote Control Remo 8 or Pushbutton Interface RF-B2-UP (available separately)
- Colours operating unit: white matt (similar to RAL 9016 Traffic White), aluminium matt or pearl dark grey matt
| Operating unit: | |
| General: | |
| Casing | Plastic material (partly lacquered) |
| Colours | • White matt (similar to RAL 9016 Traffic White) • Aluminium matt • Pearl dark grey matt |
| Degree of protection | IP20 |
| Size (W × H × D) | 103 mm × 98 mm × 28 mm |
| Total weight (including batteries) | ≈ 170 g |
| Ambient temperature | 0…+45°C |
| RH (relative humidity), non-condensing |
5...80 % |
| Storage temperature Operating unit | -10...+50°C |
| Storage temperature in the set | -10...+50°C |
| Overvoltage category | III |
| Protection class | II |
| Pollution degree | 2 |
| Radio: | |
| Frequency range | 868.0...868.6 MHz |
| Transmission power | max. 10 mW |
| Supply: | |
| Voltage battery / rechargeable battery | 2 × 1.2...1.5 V AA/Mignon |
| Sensors: | |
| Ambient temperature | 0…+50°C |
| Weather station: | |
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall or pole |
| Degree of protection | IP44 |
| Dimensions (W x H x D) | 96 mm × 76 mm × 118 mm |
| Total weight | ≈ 260 g |
| Ambient temperature | -30...+50°C |
| Storage temperature Weather station | -30...+70°C |
| Storage temperature in the set | -10...+50°C |
| Supply: | |
| Voltage | 110 V / 60 Hz 230 V / 50 Hz |
| Power consumption | ≤ 2 W |
| Drive output: | |
| Normally open contact for 1 drive (up/down/N/PE) with integrated fuse |
Micro Contact (μ) T 5.0 AH |
| Maximum motor load on drive output | 500VA (2.17A) |
| Direction change pause | 1 s |
| Connection of supply and drive output: | |
| Spring terminals Conductor cross-section solid Stripping length One wire per terminal Outer diameter cable |
0.5 …1.5 mm² 10 mm Ø ≤ 10 mm |
| Sensors: | |
| Measurement range temperature | -40...+80°C |
| Measurement range wind | 0…35 m/s |
| Measurement range brightness | 0 Lux … 150 000 Lux |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Control unit for display of weather data, alarm messages and operational mode; with integrated keys; with integrated indoor temperature sensor
- 2 batteries 1.5 V
- Weather station for report of outdoor temperature, wind speed, precipitation and brightness; with combined mounting bracket for wall or pole mounting
- Manual (German, English, French, Italian, Dutch or Slovenian)
Accessories especially recommended for this product:
- 60511 Radio remote control Remo 8, white or
- 60512 Radio remote control Remo 8, aluminium coloured
Accessory Items
Filter by language:
RTF
Solexa/Arexa Tender Specifications
Status: 11.10.2023
Item No.: 10115, 10110, 10130, 10131
Languages:
en
Solexa 230 V Manual
Status: 11.10.2023
Item No.: 10110, 10130, 10131
Languages:
en
Solexa 230 V Manuale
Status: 11.10.2023
Item No.: 10110, 10130, 10131
Languages:
it
Solexa 230 V Manuel
Status: 11.10.2023
Item No.: 10110, 10130, 10131
Languages:
fr
Solexa 230 V Priročnik
Status: 11.10.2023
Item No.: 10110, 10130, 10131
Languages:
sl
Solexa Kurzanleitung
Status: 11.10.2023
Item No.: 10110
Languages:
de
Solexa Brief Instruction
Status: 11.10.2023
Item No.: 10110
Languages:
en
Solexa Brece Instruzione
Status: 11.10.2023
Item No.: 10110
Languages:
it
ZIP
Elsner Weather Sensor / KNX PY / P03 Drawing
Status: 11.10.2023
Item No.: 10115, 30159, 701, 70119, 70157, 10110, 10130, 10131
Languages:
de, en, fr, it, es
Solexa 230 V Handbuch
Status: 12.10.2023
Item No.: 10110, 10130, 10131
Languages:
de
Solexa 230 V Handboek
Status: 12.10.2023
Item No.: 10110, 10130, 10131
Languages:
nl
Solexa 230 V Installation
Status: 23.07.2024
Item No.: 10110, 10130, 10131, 10112, 10111, 10121, 10122
Languages:
de, en, fr, it, nl
Alternative Products
Share Shopping Cart
×