Jardana
Irrigation System with WLAN Operation
Irrigation control for 4 irrigation zones, irrigation computer, automatic watering, irrigation or sprinkling. Setting via WLAN, can be combined with the KNX bus system
Highlights
-
-
Save water and garden sustainably
-
-
4 watering zones
-
-
Daily watering cycles and watering-free days for good root growth & strong plants
-
-
Easy operation via app or browser
-
-
Expandable with soil moisture sensors
- - Can be combined with the KNX bus system
Jardana controls irrigation for plants The water flow is time-controlled via four valves for four zones. The settings for the irrigation are set using the Jardana App on an WLAN device.
By installing optional Elsner TMi moisture sensors in the soil, the irrigation can
- react to rain if a ground moisture sensor is placed outside the irrigation zone.
- or react to the ground moisture in the individual zones if one sensor is placed per zone.
Jardana is KNX-compatible and can therefore be integrated into the KNX building bus system.
- Automatic watering of up to 4 zones
- 4 watering timers per zone
- Watering on specific days of the week for water-free days
- Use of ground moisture sensors possible. Watering can
• react to ground moisture in the individual zones if a ground moisture sensor is positioned in each zone
• react to rain if a sensor is positioned outside the watering zone - Setting via the Jardana App (iOS 15 to 16, Android 6.0 to 14) or a browser (Chrome, Edge, Safari)
- Connection via WLAN. Two connection modes possible:
• Access Point mode generates a separate WLAN
• Station mode connects to an existing 2.4 GHz-WLAN - Connection to a KNX system possible
| Gehäuse |
Wandhalterung: Metall Haube: Kunststoff, weiß |
| Montage | Aufputz |
| Schutzgrad | IP44 |
| Maße (B × H × T) | ≈ 590 mm × 270 mm × 145 mm |
| Gewicht | ≈ 1.2 kg |
| Umgebungstemperatur | +5...+50 °C |
| Lagertemperatur | -30...+60 °C |
| Empfohlener Druckbereich | 1.5...10 bar |
| Wassertemperatur | ≤ 40 °C |
| Versorgungsspannung über Netzgerät |
Primary: 230 V AC, 50 Hz, 15 VA Secondary: 24 V AC, max. 10.5 VA |
| Leistungsaufnahme |
≤ 10.5 W während Bewässerung: ≤ 6 W während Bereitschaft: ≤ 0.8 W |
| Datenausgabe | Wifi 2.4 GHz, KNX |
- Control and valve unit
- Power pack for 230 V/50 Hz domestic socket CEE 7/3. Cable length 190 cm
- 4 mm Allen key for screwing the cover (2x cylinder head screw DIN 912 M5x16 A2)
- 4× Phillips screws WN56, 4.5×40 for wall fastening
- 4× Anchors SX6×30 for concrete, stone, etc.
- 4× Insulation anchors FID 50 K (L = 50 mm) for insulated house walls
- 4× Washers DIN125, 5.3x10x1 A2
- 6× Cable ties 100×2.5mm white
- Cable gland M16 for optional connection of the KNX cable
- Installation instructions (German, English, French, Italian, Spanish)
- Jardana app for Android or iPhone in the stores
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download
Accessory Items
Filter by language:
ZIP
Jardana controls irrigation for plants The water flow is time-controlled via four valves for four zones. The settings for the irrigation are set using the Jardana App on an WLAN device.
By installing optional Elsner TMi moisture sensors in the soil, the irrigation can
- react to rain if a ground moisture sensor is placed outside the irrigation zone.
- or react to the ground moisture in the individual zones if one sensor is placed per zone.
Jardana is KNX-compatible and can therefore be integrated into the KNX building bus system.
- Automatic watering of up to 4 zones
- 4 watering timers per zone
- Watering on specific days of the week for water-free days
- Use of ground moisture sensors possible. Watering can
• react to ground moisture in the individual zones if a ground moisture sensor is positioned in each zone
• react to rain if a sensor is positioned outside the watering zone - Setting via the Jardana App (iOS 15 to 16, Android 6.0 to 14) or a browser (Chrome, Edge, Safari)
- Connection via WLAN. Two connection modes possible:
• Access Point mode generates a separate WLAN
• Station mode connects to an existing 2.4 GHz-WLAN - Connection to a KNX system possible
| Gehäuse |
Wandhalterung: Metall Haube: Kunststoff, weiß |
| Montage | Aufputz |
| Schutzgrad | IP44 |
| Maße (B × H × T) | ≈ 590 mm × 270 mm × 145 mm |
| Gewicht | ≈ 1.2 kg |
| Umgebungstemperatur | +5...+50 °C |
| Lagertemperatur | -30...+60 °C |
| Empfohlener Druckbereich | 1.5...10 bar |
| Wassertemperatur | ≤ 40 °C |
| Versorgungsspannung über Netzgerät |
Primary: 230 V AC, 50 Hz, 15 VA Secondary: 24 V AC, max. 10.5 VA |
| Leistungsaufnahme |
≤ 10.5 W während Bewässerung: ≤ 6 W während Bereitschaft: ≤ 0.8 W |
| Datenausgabe | Wifi 2.4 GHz, KNX |
- Control and valve unit
- Power pack for 230 V/50 Hz domestic socket CEE 7/3. Cable length 190 cm
- 4 mm Allen key for screwing the cover (2x cylinder head screw DIN 912 M5x16 A2)
- 4× Phillips screws WN56, 4.5×40 for wall fastening
- 4× Anchors SX6×30 for concrete, stone, etc.
- 4× Insulation anchors FID 50 K (L = 50 mm) for insulated house walls
- 4× Washers DIN125, 5.3x10x1 A2
- 6× Cable ties 100×2.5mm white
- Cable gland M16 for optional connection of the KNX cable
- Installation instructions (German, English, French, Italian, Spanish)
- Jardana app for Android or iPhone in the stores
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download
Accessory Items
Filter by language:
ZIP
Item No.: 70309
Languages:
Item No.: 70309
Languages:
Item No.: 70309
Languages:
Item No.: 70309
Languages:
Item No.: 70309
Languages:
Item No.: 70309
Languages:
Item No.: 70309
Languages:
Item No.: 70309
Languages: