Cala KNX IL, pure white RAL 9010
Indicator Light Green/Yellow/Red
Signal light red, yellow, green, luminous display
The LED area of the Cala KNX IL LED light signal can illuminate or flash in the colours green, yellow or red. This allows states to be visualised for the KNX bus system. E.g. threshold value violations, room occupancy or other status messages can be linked to Cala KNX IL. The colour changes if the set threshold values are exceeded / undercut or if the status changes.
The KNX application of the device offers further intelligent functions for the KNX system:
- AND/OR logic gates link states.
- Values received via communication object are compared and output in the control value comparator.
Cala KNX IL is inserted into a 55 mm frame of the switch range used in the building and thus fits seamlessly into the interior design.
- Indicator light for visualising states (e. g. limit value violations, room
occupation of status reports) - Display (permanent or flashing) of one of the colours Green, Yellow or Red
- 4 AND and 4 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 control variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Configuration is made using the KNX software as of ETS 5
| General: | |
| Casing | Genuine glass, plastic, meta |
| Colour display | 34 mm × 34 mm |
| Casing colour (similar) | RAL 9010 (white) |
| Degree of protection (after assem-bly) | IP20 |
| Size (W × H × D) Supporting ring (W × H) Mounting depth |
55mm × 55mm × 35mm 71 mm × 71 mm ≈ 7mm |
| Total weight | ≈ 55g |
| Ambient temperature | 0…+45°C |
| RH (relative humidity), non-condensing | 0...95% |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | Cala KNX IL: 77 Cala KNX IL CO2: 115 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 30mA |
| Connection KNX plug-in terminals Conductor diameter Stripping length |
Ø 0.8 mm s 5 mm |
| Duration after bus voltage restoration until data is received | ≈ 5s |
| Sensors: | |
| CO2 measurement range | Cala KNX IL CO2: 400...5000 ppm |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- 55 mm insert with LED illuminated
area - Supporting ring
- KNX plug-in terminal
- Installation instructions (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download Additionally required (not included in the deliverables):
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building
- Socket according to DIN EN IEC 60670-1 / DIN 49073
Filter by language:
Item No.: 71390, 71380
Languages:
ZIP
Item No.: 71380, 71381
Languages:
ZIP
Item No.: 71390, 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70970, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71380, 71050, 71052
Languages:
The LED area of the Cala KNX IL LED light signal can illuminate or flash in the colours green, yellow or red. This allows states to be visualised for the KNX bus system. E.g. threshold value violations, room occupancy or other status messages can be linked to Cala KNX IL. The colour changes if the set threshold values are exceeded / undercut or if the status changes.
The KNX application of the device offers further intelligent functions for the KNX system:
- AND/OR logic gates link states.
- Values received via communication object are compared and output in the control value comparator.
Cala KNX IL is inserted into a 55 mm frame of the switch range used in the building and thus fits seamlessly into the interior design.
- Indicator light for visualising states (e. g. limit value violations, room
occupation of status reports) - Display (permanent or flashing) of one of the colours Green, Yellow or Red
- 4 AND and 4 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 control variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Configuration is made using the KNX software as of ETS 5
| General: | |
| Casing | Genuine glass, plastic, meta |
| Colour display | 34 mm × 34 mm |
| Casing colour (similar) | RAL 9010 (white) |
| Degree of protection (after assem-bly) | IP20 |
| Size (W × H × D) Supporting ring (W × H) Mounting depth |
55mm × 55mm × 35mm 71 mm × 71 mm ≈ 7mm |
| Total weight | ≈ 55g |
| Ambient temperature | 0…+45°C |
| RH (relative humidity), non-condensing | 0...95% |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | Cala KNX IL: 77 Cala KNX IL CO2: 115 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 30mA |
| Connection KNX plug-in terminals Conductor diameter Stripping length |
Ø 0.8 mm s 5 mm |
| Duration after bus voltage restoration until data is received | ≈ 5s |
| Sensors: | |
| CO2 measurement range | Cala KNX IL CO2: 400...5000 ppm |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- 55 mm insert with LED illuminated
area - Supporting ring
- KNX plug-in terminal
- Installation instructions (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download Additionally required (not included in the deliverables):
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building
- Socket according to DIN EN IEC 60670-1 / DIN 49073
Filter by language:
Item No.: 71390, 71380
Languages:
ZIP
Item No.: 71380, 71381
Languages:
Item No.: 71390, 71380
Languages:
Item No.: 71390, 71380
Languages:
Item No.: 71390, 71380
Languages:
Item No.: 71390, 71380
Languages:
Item No.: 71390, 71380
Languages:
ZIP
Item No.: 71390, 70972, 70616, 70617, 70619, 70620, 70625, 70626, 70622, 70623, 70629, 70628, 70631, 70632, 70800, 70802, 70850, 70852, 70970, 70860, 70862, 70890, 70892, 70980, 70982, 70992, 70990, 70812, 70810, 70820, 70822, 70870, 70872, 70880, 70882, 70950, 70952, 70960, 70962, 71380, 71050, 71052
Languages: