Cala KNX IL CO2 CH
CO2 Indicator Light for Air Quality, with Sensor
CO2 indicator with CO2 sensor, carbon dioxide sensor
€289.00
incl. 19% VAT, excl. shipping
Item No.:
Item No.: 00548
Item No.:
Item No.: 00548
Description
Cala KNX IL CO2 CH is an LED light signal that indicates the air quality in the room. The CO2 concentration is measured by the integrated sensor and controls the colour of the light surface. The LED surface lights up or flashes in the colours green, yellow or red.
However, Cala KNX IL CO2 CH does not only make the carbon dioxide pollution visible. It also regulates the ventilation via KNX accordingly.
In some places it makes sense to use a CO2 room average for display and control. For this purpose, Cala KNX IL CO2 can calculate a mixed value from a CO2 value received via the bus and its own value.
The KNX application of the device offers further intelligent functions for the KNX system:
- The CO2 value controls switching outputs depending on the limit value.
- AND/OR logic gates link states.
- Values received via communication object are compared and output in the control value comparator.
Cala KNX IL CO2 CH can also visualise other states in the KNX bus system, e.g. limit value violations or status messages. The functionality then corresponds to that of the Cala KNX IL model.
Cala KNX IL CO2 CH is inserted into the 60 mm frame of a Swiss switch range and thus fits seamlessly into the interior design.
Models:
No. 71391 Cala KNX IL CO2 CH, pure white RAL 9010
No. 71393 Cala KNX IL CO2 CH, jet black RAL 9005
Technical details and the most important setting and application options of Cala KNX IL CO2 CH can be found here at a glance.
https://www.elsner-elektronik.de/en/themes/cala-knx-il-co2-technical-details-and-setting-options
Functions
- Measuring the CO2-concentration in the air each time with mixed value calculation. The share of internal measured value and external value can be set as a percentage
- Use of the CO2-concentration for the indicator light function
- Display (permanent or flashing) of one of the colours Green, Yellow or Red
- Threshold values can be adjusted per parameter or via communication object
- PI controller for two-stage ventilation according to CO2-concentration
- 4 AND and 4 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 control variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Indicator light for visualising states (e. g. limit value violations, room occupation of status reports)
Technical data
| General: | |
| Casing Genuine glass, plastic, metal | Echtglas, Kunststoff, Metall |
| Colour display | 34 mm × 34 mm |
| Casing colour (similar) | RAL 9010 (white) |
| Degree of protection (after assem-bly) | IP20 |
| Size (W × H) Mounting depth |
60mm × 60mm ≥ 10mm |
| Total weight | ≈ 55g |
| Ambient temperature | 0…+45°C |
| Ambient humidity (RH) (non-condensing) |
0...95% |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | 115 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 30mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5s |
| Sensors: | |
| CO2 measurement range | 400...5000 ppm |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
Scope of delivery & Accessories
- 60 mm insert with LED illuminated area
- Mounting adapter with screws
- KNX plug-in terminal
- Installation instructions (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download
Accessories required
- Cover frame (for insert 60 x 60 mm)
- Mounting plate (77 mm)
- Inlet box
Filter by language:
Cala KNX IL CH Installation
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
de, en, fr, it, es
Cala KNX IL CH Handbuch
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
de
Cala KNX IL CH Manual
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
en
Cala KNX IL CH Manual
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
es
Cala KNX IL CH Manuel
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
fr
Cala KNX IL CH Manuale
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
it
ZIP
Cala KNX IL CO2 Applikation 1.1
Status: 19.02.2024
Item No.: 71390, 71391, 71393, 71392
Languages:
de, en, es, fr, it
Ausschreibungstext Cala KNX IL CO2
Status: 21.03.2024
Item No.: 71390, 71391, 71393, 71392
Languages:
de
-
Description
-
Functions
-
Technical data
-
Scope of delivery & Accessories
-
Downloads
Cala KNX IL CO2 CH is an LED light signal that indicates the air quality in the room. The CO2 concentration is measured by the integrated sensor and controls the colour of the light surface. The LED surface lights up or flashes in the colours green, yellow or red.
However, Cala KNX IL CO2 CH does not only make the carbon dioxide pollution visible. It also regulates the ventilation via KNX accordingly.
In some places it makes sense to use a CO2 room average for display and control. For this purpose, Cala KNX IL CO2 can calculate a mixed value from a CO2 value received via the bus and its own value.
The KNX application of the device offers further intelligent functions for the KNX system:
- The CO2 value controls switching outputs depending on the limit value.
- AND/OR logic gates link states.
- Values received via communication object are compared and output in the control value comparator.
Cala KNX IL CO2 CH can also visualise other states in the KNX bus system, e.g. limit value violations or status messages. The functionality then corresponds to that of the Cala KNX IL model.
Cala KNX IL CO2 CH is inserted into the 60 mm frame of a Swiss switch range and thus fits seamlessly into the interior design.
Models:
No. 71391 Cala KNX IL CO2 CH, pure white RAL 9010
No. 71393 Cala KNX IL CO2 CH, jet black RAL 9005
Technical details and the most important setting and application options of Cala KNX IL CO2 CH can be found here at a glance.
https://www.elsner-elektronik.de/en/themes/cala-knx-il-co2-technical-details-and-setting-options
- Measuring the CO2-concentration in the air each time with mixed value calculation. The share of internal measured value and external value can be set as a percentage
- Use of the CO2-concentration for the indicator light function
- Display (permanent or flashing) of one of the colours Green, Yellow or Red
- Threshold values can be adjusted per parameter or via communication object
- PI controller for two-stage ventilation according to CO2-concentration
- 4 AND and 4 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 control variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Indicator light for visualising states (e. g. limit value violations, room occupation of status reports)
| General: | |
| Casing Genuine glass, plastic, metal | Echtglas, Kunststoff, Metall |
| Colour display | 34 mm × 34 mm |
| Casing colour (similar) | RAL 9010 (white) |
| Degree of protection (after assem-bly) | IP20 |
| Size (W × H) Mounting depth |
60mm × 60mm ≥ 10mm |
| Total weight | ≈ 55g |
| Ambient temperature | 0…+45°C |
| Ambient humidity (RH) (non-condensing) |
0...95% |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Degree of contamination | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | 115 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 30mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5s |
| Sensors: | |
| CO2 measurement range | 400...5000 ppm |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- 60 mm insert with LED illuminated area
- Mounting adapter with screws
- KNX plug-in terminal
- Installation instructions (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download
Accessories required
- Cover frame (for insert 60 x 60 mm)
- Mounting plate (77 mm)
- Inlet box
Filter by language:
Cala KNX IL CH Installation
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
de, en, fr, it, es
Cala KNX IL CH Handbuch
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
de
Cala KNX IL CH Manual
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
en
Cala KNX IL CH Manual
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
es
Cala KNX IL CH Manuel
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
fr
Cala KNX IL CH Manuale
Status: 10.02.2026
Item No.: 71381, 71391, 71393, 71383
Languages:
it
ZIP
Cala KNX IL CO2 Applikation 1.1
Status: 19.02.2024
Item No.: 71390, 71391, 71393, 71392
Languages:
de, en, es, fr, it
Ausschreibungstext Cala KNX IL CO2
Status: 21.03.2024
Item No.: 71390, 71391, 71393, 71392
Languages:
de
Alternative Products
Share Shopping Cart
×