Sensors for KNX B8-TH

The T-UP basic and TH-UP basic indoor sensors are indoor climate sensors specially designed for the KNX B8-TH interface. T-UP basic measures temperature. TH-UP basic measures temperature and air humidity.
The housing is supplemented with a frame of the switch series used in buildings, and thus fits seamlessly into the interior fittings.

The Sensor T-NTC-ST is a temperature sensor specially for the KNX B8-TH interface. The sensor measures the temperature indoors and outdoors.

Models:

N° 30520 T-UP basic, indoor sensor (temperature)
N° 30525 TH-UP basic, indoor sensor (temperature, air humitity)
N° 30513 T-NTC-ST, feed/contact probe for temperature measurement


Sensors T-UP basic and TH-UP basic

  • Wall-mounted sensor
  • Measuring of temperature (T) or temperature and air humidity (TH)

Sensor T-NTC-ST

  • Feed/contact probe for temperature measurement

Sensors T-UP basic and TH-UP basic:

HousingPlastic
Colours• White, glossy (similar to RAL 9016 traffic white)
• Special colours on request
AssemblyFlush mounting (wall mounting inside junction box Ø 60 mm, 42 mm

deep)

Protection categoryIP 20
DimensionsHousing approx. 55 x 55 (W x H, mm),Mounting depth approx. 15 mm,

Baseplate/board approx. 71 x 71 (W x H, mm),

Total weightapprox. 45 g
Ambient humiditymax. 95% RH, avoid condensation

Sensor T-UP basic:

Ambient temperatureOperation -25…+80°C, storage -40…+85°C
Temperature measuring range-25…+80°C

Sensor TH-UP basic:

Ambient temperatureOperation -40…+125°C, storage -40…+125°C
Temperature measuring range-40…+125°C
Humidity measuring range0…100% RH

Sensor T-NTC-ST

Sensor sleeve Metal
Cable colour black
Protection category IP 43
Dimensions Sensor sleeve length approx. 32 mm, Diameter approx. 6 mm,
Cable length approx. 300 cm
Measurement range -35°C…+100°C