Sensors for KNX B8-TH
Temperature and Humidity Sensors especially for Interface KNX B8-TH
The TH-UP basic indoor sensors are indoor climate sensors specially designed for the KNX B8-TH interface. T-UP basic measures temperature. TH-UP basic measures temperature and air humidity.
The housing is supplemented with a frame of the switch series used in buildings, and thus fits seamlessly into the interior fittings.
The Sensor T-NTC-ST is a temperature sensor specially for the KNX B8-TH interface. The sensor measures the temperature indoors and outdoors.
Models:
N° 30525 TH-UP basic, indoor sensor (temperature, air humitity)
N° 30513 T-NTC-ST, feed/contact probe for temperature measurement
Sensor TH-UP basic
- Wall-mounted sensor
- Measuring of temperature and air humidity
Sensor T-NTC-ST
- Feed/contact probe for temperature measurement
| Sensor TH-UP basic | |
| Housing | Plastic |
| Colours | • White, glossy (similar to RAL 9016 traffic white) • Special colours on request |
| Assembly | Flush mounting (wall mounting inside junction box Ø 60 mm, 42 mm deep) |
| Degree of protection | IP 20 |
| Dimensions | Housing approx. 55 x 55 (W x H, mm),Mounting depth approx. 15 mm, Baseplate/board approx. 71 x 71 (W x H, mm) |
| Total weight | approx. 45 g |
| Ambient humidity | max. 95% RH, avoid condensation |
| Ambient temperature | Operation -40…+125°C, storage -40…+125°C |
| Temperature measuring range | 5…+45°C |
| Humidity measuring range | 0…100% RH |
| Sensor T-NTC-ST | |
| Sensor sleeve | Metal |
| Cable colour | black |
| Degree of protection | IP 43 |
| Dimensions | Sensor sleeve length approx. 32 mm, Diameter approx. 6 mm, Cable length approx. 300 cm |
| Measurement range | -35°C…+100°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
TH-UP basic
- Sensor board/baseplate
- 55 mm housing
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
Additionally required (not included in the deliverables):
- Junction box Ø 60 mm, 42 mm deep
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building
T-NTC-ST
- Sensor with connecting cable
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
Filter by language:
The TH-UP basic indoor sensors are indoor climate sensors specially designed for the KNX B8-TH interface. T-UP basic measures temperature. TH-UP basic measures temperature and air humidity.
The housing is supplemented with a frame of the switch series used in buildings, and thus fits seamlessly into the interior fittings.
The Sensor T-NTC-ST is a temperature sensor specially for the KNX B8-TH interface. The sensor measures the temperature indoors and outdoors.
Models:
N° 30525 TH-UP basic, indoor sensor (temperature, air humitity)
N° 30513 T-NTC-ST, feed/contact probe for temperature measurement
Sensor TH-UP basic
- Wall-mounted sensor
- Measuring of temperature and air humidity
Sensor T-NTC-ST
- Feed/contact probe for temperature measurement
| Sensor TH-UP basic | |
| Housing | Plastic |
| Colours | • White, glossy (similar to RAL 9016 traffic white) • Special colours on request |
| Assembly | Flush mounting (wall mounting inside junction box Ø 60 mm, 42 mm deep) |
| Degree of protection | IP 20 |
| Dimensions | Housing approx. 55 x 55 (W x H, mm),Mounting depth approx. 15 mm, Baseplate/board approx. 71 x 71 (W x H, mm) |
| Total weight | approx. 45 g |
| Ambient humidity | max. 95% RH, avoid condensation |
| Ambient temperature | Operation -40…+125°C, storage -40…+125°C |
| Temperature measuring range | 5…+45°C |
| Humidity measuring range | 0…100% RH |
| Sensor T-NTC-ST | |
| Sensor sleeve | Metal |
| Cable colour | black |
| Degree of protection | IP 43 |
| Dimensions | Sensor sleeve length approx. 32 mm, Diameter approx. 6 mm, Cable length approx. 300 cm |
| Measurement range | -35°C…+100°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
TH-UP basic
- Sensor board/baseplate
- 55 mm housing
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
Additionally required (not included in the deliverables):
- Junction box Ø 60 mm, 42 mm deep
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building
T-NTC-ST
- Sensor with connecting cable
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
Filter by language:
Item No.: 30525
Languages:
Item No.: 30525
Languages:
Item No.: 30525
Languages:
Item No.: 30525
Languages:
Item No.: 30525
Languages:
Item No.: 30513
Languages: