KNX eTR 201/202 Sunblind

Button for Temperature Control, Solar Protection

 

  • Heating controller/thermostat
  • Glass surface with temperature display and +/- touch keys
  • Pushbutton for sun protection (e.g. blind, roller shutter, awning)

The KNX eTR 201/202 Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and solar protection. White LEDs are integrated in these areas and their behaviour can be adjusted.

A temperature sensor is integrated into KNX eTR 201/202 Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).

The KNX eTR 201/202 Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons. Communication objects can be linked via AND and OR logic gates.

Models:


No. 71090 KNX eTR 201 Sunblind, signal white RAL 9003
No. 71100 KNX eTR 202 Sunblind, signal white RAL 9003
No. 71092 KNX eTR 201 Sunblind, jet black RAL 9005
No. 71102 KNX eTR 202 Sunblind, jet black RAL 9005


  • eTR series eTR series
  • KNX eTR 201, RAL 9003 signal white (71090) KNX eTR 201, RAL 9003 signal white (71090)
  • KNX eTR 201, RAL 9003 signal white (71090) KNX eTR 201, RAL 9003 signal white (71090)
  • KNX eTR 201, RAL 9005 jet black (71092) KNX eTR 201, RAL 9005 jet black (71092)
  • KNX eTR 201, RAL 9005 jet black (71092) KNX eTR 201, RAL 9005 jet black (71092)
  • KNX eTR 202, RAL 9003 signal white (71100) KNX eTR 202, RAL 9003 signal white (71100)
  • KNX eTR 202, RAL 9003 signal white (71100) KNX eTR 202, RAL 9003 signal white (71100)
  • KNX eTR 202, RAL 9005 jet black (71102) KNX eTR 202, RAL 9005 jet black (71102)
  • KNX eTR 202, RAL 9005 jet black (71102) KNX eTR 202, RAL 9005 jet black (71102)
  • KNX eTR 202, RAL 9005 jet black (71102) KNX eTR 202, RAL 9005 jet black (71102)
  • eTR series eTR series
  • KNX eTR 20x: back view and mounting KNX eTR 20x: back view and mounting
  • Operating zone for temperature control with 2 areas (warmer, cooler)
  • LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
  • Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
  • Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
  • PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
  • 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit

Additional functions KNX eTR 201 Sunblind:

  • 1 operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)

Additional functions KNX eTR 202 Sunblind:

  • 2 operating zones for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)

Configuration is made using the KNX software ETS 5

Housingplastic material, glass
Colours• similar to RAL 9003 signal white
• similar to RAL 9005 deep black
Mountingon-wall (directly or with a socket Ø 60 mm,
resp. cavity wall socket for hole Ø 68 mm)
Degree of protectionIP 10
Dimensionshousing approx. 81,5 x 81,5 (W x H, mm),
mounting depth approx. 12 mm
Total weightapprox. 70 g
Ambient temperatureOperation 0…+55°C, storage -30…+85°C
Ambient air humidity5...95% RH, avoid bedewing
Operating voltageKNX bus voltage
Bus currentmax. 25 mA
Data outputKNX +/- bus terminals
Group addressesmax. 254
Allocationsmax. 254
Communication objectsKNX eTR 201 Sunblind: 92
KNX eTR 202 Sunblind: 98
Temperature measure
ment range
0…+55°C
Temperature resolution0.1°C