KNX eTR 201/202 Sunblind
Button for Temperature Control, Solar Protection
KNX heating controller with temperature sensor, blind operation/sun protection operation
Highlights
-
-
Heating controller/thermostat
-
-
Glass surface with temperature display and +/- touch keys
- - Pushbutton for sun protection (e.g. blind, roller shutter, awning)
The KNX eTR 201/202 Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and solar protection. White LEDs are integrated in these areas and their behaviour can be adjusted.
A temperature sensor is integrated into KNX eTR 201/202 Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
The KNX eTR 201/202 Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons. Communication objects can be linked via AND and OR logic gates.
Models:
No. 71093 KNX eTR 201 Sunblind, signal white RAL 9003 – Version with locking screw on the bottom of the housing
No. 71094 KNX eTR 201 Sunblind, jet black RAL 9005 – Version with locking screw on the bottom of the housing
No. 71103 KNX eTR 202 Sunblind, signal white RAL 9003 – Version with locking screw on the bottom of the housing
No. 71102 KNX eTR 202 Sunblind, jet black RAL 9005 – Version with locking screw on the bottom of the housing
No. 71090 KNX eTR 201 Sunblind, signal white RAL 9003 – Discontinued model, no longer produced
No. 71100 KNX eTR 202 Sunblind, signal white RAL 9003 – Discontinued model, no longer produced
No. 71092 KNX eTR 201 Sunblind, jet black RAL 9005 – Discontinued model, no longer produced
No. 71102 KNX eTR 202 Sunblind, jet black RAL 9005 – Discontinued model, no longer produced
Note on the changeover of the eTR series housing from January 2025:
The new models have a locking screw on the bottom of the housing. This makes it more difficult to remove the device from the wall. It can only be installed and uninstalled with a tool (screwdriver). The new design thus creates a barrier to unauthorised tampering. The installation depth of the new models is increased by approx. 0.5 mm. Appearance, range of functions and ETS application remain the same.
- Operating zone for temperature control with 2 areas (warmer, cooler)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Additional functions KNX eTR 201 Sunblind:
- 1 operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Additional functions KNX eTR 202 Sunblind:
- 2 operating zones for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Configuration is made using the KNX software ETS
| Housing | plastic material, glass |
| Colours | • similar to RAL 9003 signal white • similar to RAL 9005 deep black |
| Mounting | on-wall (directly or with a socket Ø 60 mm, resp. cavity wall socket for hole Ø 68 mm) |
| Degree of protection | IP 10 |
| Dimensions | housing approx. 81,5 x 81,5 (W x H, mm), mounting depth approx. 12 mm |
| Total weight | approx. 70 g |
| Ambient temperature | Operation 0…+55°C, storage -30…+85°C |
| Ambient air humidity | 5...95% RH, avoid bedewing |
| Operating voltage | KNX bus voltage |
| Bus current | max. 25 mA |
| Data output | KNX +/- bus terminals |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | KNX eTR 201 Sunblind: 92 KNX eTR 202 Sunblind: 98 |
| Temperature measure ment range |
0…+55°C |
| Temperature resolution | 0.1°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Room temperature controller with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
RTF
Item No.: 71092, 71090
Languages:
ZIP
Item No.: 71092, 71090, 71093, 71094
Languages:
ZIP
Item No.: 71100, 71102, 71103, 71104
Languages:
Item No.: 71092, 71090
Languages:
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages:
The KNX eTR 201/202 Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and solar protection. White LEDs are integrated in these areas and their behaviour can be adjusted.
A temperature sensor is integrated into KNX eTR 201/202 Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
The KNX eTR 201/202 Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons. Communication objects can be linked via AND and OR logic gates.
Models:
No. 71093 KNX eTR 201 Sunblind, signal white RAL 9003 – Version with locking screw on the bottom of the housing
No. 71094 KNX eTR 201 Sunblind, jet black RAL 9005 – Version with locking screw on the bottom of the housing
No. 71103 KNX eTR 202 Sunblind, signal white RAL 9003 – Version with locking screw on the bottom of the housing
No. 71102 KNX eTR 202 Sunblind, jet black RAL 9005 – Version with locking screw on the bottom of the housing
No. 71090 KNX eTR 201 Sunblind, signal white RAL 9003 – Discontinued model, no longer produced
No. 71100 KNX eTR 202 Sunblind, signal white RAL 9003 – Discontinued model, no longer produced
No. 71092 KNX eTR 201 Sunblind, jet black RAL 9005 – Discontinued model, no longer produced
No. 71102 KNX eTR 202 Sunblind, jet black RAL 9005 – Discontinued model, no longer produced
Note on the changeover of the eTR series housing from January 2025:
The new models have a locking screw on the bottom of the housing. This makes it more difficult to remove the device from the wall. It can only be installed and uninstalled with a tool (screwdriver). The new design thus creates a barrier to unauthorised tampering. The installation depth of the new models is increased by approx. 0.5 mm. Appearance, range of functions and ETS application remain the same.
- Operating zone for temperature control with 2 areas (warmer, cooler)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Additional functions KNX eTR 201 Sunblind:
- 1 operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Additional functions KNX eTR 202 Sunblind:
- 2 operating zones for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
Configuration is made using the KNX software ETS
| Housing | plastic material, glass |
| Colours | • similar to RAL 9003 signal white • similar to RAL 9005 deep black |
| Mounting | on-wall (directly or with a socket Ø 60 mm, resp. cavity wall socket for hole Ø 68 mm) |
| Degree of protection | IP 10 |
| Dimensions | housing approx. 81,5 x 81,5 (W x H, mm), mounting depth approx. 12 mm |
| Total weight | approx. 70 g |
| Ambient temperature | Operation 0…+55°C, storage -30…+85°C |
| Ambient air humidity | 5...95% RH, avoid bedewing |
| Operating voltage | KNX bus voltage |
| Bus current | max. 25 mA |
| Data output | KNX +/- bus terminals |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | KNX eTR 201 Sunblind: 92 KNX eTR 202 Sunblind: 98 |
| Temperature measure ment range |
0…+55°C |
| Temperature resolution | 0.1°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Room temperature controller with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
RTF
Item No.: 71092, 71090
Languages:
Item No.: 71092, 71090
Languages:
Item No.: 71092, 71090
Languages:
Item No.: 71092, 71090
Languages:
Item No.: 71092, 71090
Languages:
Item No.: 71092, 71090
Languages:
ZIP
Item No.: 71092, 71090, 71093, 71094
Languages:
ZIP
Item No.: 71100, 71102, 71103, 71104
Languages:
Item No.: 71092, 71090
Languages:
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages: