Suntracer KNX pro
Weather Station
KNX weather station with sensors for brightness, wind (speed, direction), precipitation, temperature, humidity, air pressure.
€2,342.00
incl. 19% VAT, excl. shipping
Item No.:
Item No.: 70900
Item No.:
Item No.: 70900
Description
The Weather Station Suntracer KNX pro for the KNX building bus system measures temperature, wind speed, wind direction, brightness, air humidity and air pressure. It recognises precipitation and receives the GPS signal for time and location. In addition, using location coordinates and the time, it calculates the exact position of the sun (azimuth and elevation).
All values can be used for the control of limit dependent switching outputs. States can be linked via AND logic gates and OR logic gates. Multi-function modules change input data as required by means of calculations, querying a condition, or converting the data point type.
The integrated shade control system allows intelligent sun protection control of up to 12 facades.
Functions
- Brightness measurement (current light strength). Measurement with 5 separate sensors, output of the current highest value (one maximum value). Separate limit values for night
- GPS receiver, outputting the current time and location coordinates. The Weather Station Suntracer KNX pro also computes the position of the sun (azimuth and elevation)
- Shade control for up to 12 façades with slat tracking and shadow edge tracking
- Wind measurement: Measurement of wind strength and wind direction (0°-360°) by ultrasound
- Precipitation detection: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends
- Temperature measurement. Calculation of the apparent temperature (considering wind strength and air humidity)
- Frost protection for shading systems
- Air humidity measurement (relative, absolute)
- Bus message, whether the values of temperature and humidity are within the comfort field (DIN 1946). Calculation of the dew point
- Air pressure measurement
- Weekly and calendar time switch: All time switching outputs can be used as communication objects. The weekly time switch has 24 periods. Each period can be configured either as an output or as an input. If the period is an output, then the switching time is set per parameter or per communication object. The calendar time switch has 4 periods. Two on/off switching operations, which are executed daily, can be set for each period
- Switching outputs for all measured and computed values. Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output of each gate can be configured optionally as 1-bit or 2 x 8-bit
- 8 multi-function modules (computers) for changing the input data by calculations, by querying a condition or by converting the data point type
- Summer compensation for cooling systems. A characteristic curve matches the target temperature in the room to the external temperature and sets the minimum and maximum target temperature values.
Configuration is made using the KNX software ETS
Technical data
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Polemounting | |
| Protection class | IP44 |
| Dimensions weather station (W x H x D), ring with base |
≈ 260 mm × 145 mm × 300 mm |
| Dimensions pole extension Length pipe diameter mounting for pole (screw brackets) plate (W × H × D) Hole spacing |
50 cm 50 mm 40...60 mm 130 mm × 110 mm × 4 mm 70 mm |
| Dimensions power supply unit (W x H x D), 3 modules |
≈ 54 mm × 95 mm × 68.5 mm |
| Weight Weather station Pole extension (incl. screw brackets) Power supply unit Connection accessories |
≈ 600 g ≈ 1 kg ≈ 210 g ≈ 430 g |
| Ambient temperature | -30...+50°C |
| Storage temperature | -30...+70°C |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 2000 |
| Assignments maximum | 2000 |
| Communication objects | 1415 |
| Power consumption | ≤ 10mA |
| Duration after bus voltage restoration until data is received | ≈ 8 s |
| Supply: | |
| Voltage (yellow + / white -) | 24V DC SELV ±10 % |
| Power consumption [at] | heating off: 6W [t > 7.5°C] heating on: ≤ 40W [t ≤ 7.5°C] |
| Sensors: | |
| Measurement range temperature | -30...+50°C |
| Measurement range air humidity (rH) | 0%…100 % |
| Measurement range wind speed | 0…35 m/s |
| Measurement range wind direction [from wind speed] |
0...360° [v > 0.5 m/s] |
| Measurement range pressure | 300 mbar … 1100 mbar |
| Measurement range brightness | 0 Lux … 150 000 Lux |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
Scope of delivery & Accessories
- Weather station
- Mast extension 50 cm long, with 2 screw brackets for fastening
- 6x M5 nuts, self-locking with 2 matching fork wrenches
- Screw DIN 933 M5x20 A2 (in base holder)
- Circular level
- Cable M8 4-pole, 10 m
- Junction box Mini 25-L (IP 55, not weather-resistant) and 4x 2-conductor connecting clamps
- Mains unit PS2500
- Magnet for programming
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Suntracer KNX pro Application 1.4
Status: 11.10.2023
Item No.: 70900
Languages:
de, en, fr, it, es
RTF
Suntracer KNX pro Installation
Status: 11.10.2023
Item No.: 70900
Languages:
de, en, fr, it, es
ZIP
Elsner Suntracer pro Drawing
Status: 11.10.2023
Item No.: 30167, 70900
Languages:
de, en, fr, it, es
KNX Certificate Suntracer KNX pro
Status: 04.12.2023
Item No.: 70900
Languages:
de, en, fr, it, es, es
-
Description
-
Functions
-
Technical data
-
Scope of delivery & Accessories
-
Downloads
The Weather Station Suntracer KNX pro for the KNX building bus system measures temperature, wind speed, wind direction, brightness, air humidity and air pressure. It recognises precipitation and receives the GPS signal for time and location. In addition, using location coordinates and the time, it calculates the exact position of the sun (azimuth and elevation).
All values can be used for the control of limit dependent switching outputs. States can be linked via AND logic gates and OR logic gates. Multi-function modules change input data as required by means of calculations, querying a condition, or converting the data point type.
The integrated shade control system allows intelligent sun protection control of up to 12 facades.
- Brightness measurement (current light strength). Measurement with 5 separate sensors, output of the current highest value (one maximum value). Separate limit values for night
- GPS receiver, outputting the current time and location coordinates. The Weather Station Suntracer KNX pro also computes the position of the sun (azimuth and elevation)
- Shade control for up to 12 façades with slat tracking and shadow edge tracking
- Wind measurement: Measurement of wind strength and wind direction (0°-360°) by ultrasound
- Precipitation detection: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends
- Temperature measurement. Calculation of the apparent temperature (considering wind strength and air humidity)
- Frost protection for shading systems
- Air humidity measurement (relative, absolute)
- Bus message, whether the values of temperature and humidity are within the comfort field (DIN 1946). Calculation of the dew point
- Air pressure measurement
- Weekly and calendar time switch: All time switching outputs can be used as communication objects. The weekly time switch has 24 periods. Each period can be configured either as an output or as an input. If the period is an output, then the switching time is set per parameter or per communication object. The calendar time switch has 4 periods. Two on/off switching operations, which are executed daily, can be set for each period
- Switching outputs for all measured and computed values. Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output of each gate can be configured optionally as 1-bit or 2 x 8-bit
- 8 multi-function modules (computers) for changing the input data by calculations, by querying a condition or by converting the data point type
- Summer compensation for cooling systems. A characteristic curve matches the target temperature in the room to the external temperature and sets the minimum and maximum target temperature values.
Configuration is made using the KNX software ETS
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Polemounting | |
| Protection class | IP44 |
| Dimensions weather station (W x H x D), ring with base |
≈ 260 mm × 145 mm × 300 mm |
| Dimensions pole extension Length pipe diameter mounting for pole (screw brackets) plate (W × H × D) Hole spacing |
50 cm 50 mm 40...60 mm 130 mm × 110 mm × 4 mm 70 mm |
| Dimensions power supply unit (W x H x D), 3 modules |
≈ 54 mm × 95 mm × 68.5 mm |
| Weight Weather station Pole extension (incl. screw brackets) Power supply unit Connection accessories |
≈ 600 g ≈ 1 kg ≈ 210 g ≈ 430 g |
| Ambient temperature | -30...+50°C |
| Storage temperature | -30...+70°C |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 2000 |
| Assignments maximum | 2000 |
| Communication objects | 1415 |
| Power consumption | ≤ 10mA |
| Duration after bus voltage restoration until data is received | ≈ 8 s |
| Supply: | |
| Voltage (yellow + / white -) | 24V DC SELV ±10 % |
| Power consumption [at] | heating off: 6W [t > 7.5°C] heating on: ≤ 40W [t ≤ 7.5°C] |
| Sensors: | |
| Measurement range temperature | -30...+50°C |
| Measurement range air humidity (rH) | 0%…100 % |
| Measurement range wind speed | 0…35 m/s |
| Measurement range wind direction [from wind speed] |
0...360° [v > 0.5 m/s] |
| Measurement range pressure | 300 mbar … 1100 mbar |
| Measurement range brightness | 0 Lux … 150 000 Lux |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- Weather station
- Mast extension 50 cm long, with 2 screw brackets for fastening
- 6x M5 nuts, self-locking with 2 matching fork wrenches
- Screw DIN 933 M5x20 A2 (in base holder)
- Circular level
- Cable M8 4-pole, 10 m
- Junction box Mini 25-L (IP 55, not weather-resistant) and 4x 2-conductor connecting clamps
- Mains unit PS2500
- Magnet for programming
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Suntracer KNX pro Application 1.4
Status: 11.10.2023
Item No.: 70900
Languages:
de, en, fr, it, es
RTF
Suntracer KNX pro Tender Specifications
Status: 11.10.2023
Item No.: 70900
Languages:
en
Suntracer KNX pro Handbuch
Status: 08.01.2024
Item No.: 70900
Languages:
de
Suntracer KNX pro Installation
Status: 11.10.2023
Item No.: 70900
Languages:
de, en, fr, it, es
Suntracer KNX pro Manual
Status: 11.10.2023
Item No.: 70900
Languages:
en
Suntracer KNX pro Manual
Status: 11.10.2023
Item No.: 70900
Languages:
es
Suntracer KNX pro Manuale
Status: 11.10.2023
Item No.: 70900
Languages:
it
Suntracer KNX pro Manuel
Status: 11.10.2023
Item No.: 70900
Languages:
fr
ZIP
Elsner Suntracer pro Drawing
Status: 11.10.2023
Item No.: 30167, 70900
Languages:
de, en, fr, it, es
KNX Certificate Suntracer KNX pro
Status: 04.12.2023
Item No.: 70900
Languages:
de, en, fr, it, es, es
Suntracer KNX pro Installation Chinese
Status: 10.07.2024
Item No.: 70900
Languages:
zhans
Suntracer KNX pro Manual Chinese
Status: 10.07.2024
Item No.: 70900
Languages:
zhans
Share Shopping Cart
×