KNX W 20...30 V DC
Wind Sensor
Wind Speed Sensor for KNX.
€448.00
incl. 19% VAT, excl. shipping
Item No.:
Item No.: 70123
Item No.:
Item No.: 70123
Description
The Wind Sensor KNX W electronically measures the wind speed and transfers the value to the KNX system. Three switching outputs with adjustable threshold values as well as additional AND and OR logic gates are available.
The sensor system, the evaluation electronics and the electronics of the bus connection are mounted in a compact housing.
Functions
- Wind measurement: The wind strength measurement takes place electronically and thus noiselessly and reliably, even during hail, snow and sub-zero temperatures. Even turbulent air and anabatic winds in the vicinity of the weather station are recorded
- Wind sensor monitoring: If the wind measurement value changes by less than ± 0.5 m/s within 48 hours, the maximum measurement value of 35 m/s is output as a fault message. All wind alarms with a limit value below 35 m/s become active as a result
- 3 threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- Configuration is made using the KNX software ETS
Technical data
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall or pole |
| Protection class | IP44 |
| Dimensions (W x H x D) | 96 mm × 100 mm × 128 mm |
| Total weight | ≈ 170 g |
| Ambient temperature | -30...+50°C |
| Storage temperature | -30...+70°C |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 254 |
| Assignments maximum | 255 |
| Communication objects | 81 |
| Rated voltage | 30V DC SELV |
| Power consumption | ≤ 10mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.8 mm s 5 mm |
| Duration after bus voltage restoration until data is received | ≈ 5 s |
| Supply: | |
| Voltage (Power supply unit must comply with EN 61558-1) |
20...30V DC SELV |
| Current [at] | ≤ 100mA [24 V DC] |
| Connection Push-in spring terminal Conductor cross-section Stripping length |
0.2 … 1.0 mm² 11 mm |
| Sensors: | |
| Heater rain sensor | ≈ 1.2 W |
| Measurement range wind | 0…35 m/s |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
Scope of delivery & Accessories
- Wind sensor with combined wall/pole mounting
- 2x stainless steel installation band for pole installation
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file VD2 (German, English, French, Italian, Spanish) as download
Filter by language:
RTF
KNX W, KNX RW, KNX W sl, KNX RW sl, KNX LW sl Tender Specifications
Status: 11.10.2023
Item No.: 70129, 70119, 70123, 70158, 70162, 70164
Languages:
en
ZIP
Elsner Weather Station / P03 /Suntracer KNX Drawing
Status: 12.10.2023
Item No.: 30145, 30151, 30140, 3093, 3094, 70127, 70129, 30147, 30114, 30159, 3096, 70123, 10150
Languages:
de, en, fr, it, es
ZIP
-
Description
-
Functions
-
Technical data
-
Scope of delivery & Accessories
-
Downloads
The Wind Sensor KNX W electronically measures the wind speed and transfers the value to the KNX system. Three switching outputs with adjustable threshold values as well as additional AND and OR logic gates are available.
The sensor system, the evaluation electronics and the electronics of the bus connection are mounted in a compact housing.
- Wind measurement: The wind strength measurement takes place electronically and thus noiselessly and reliably, even during hail, snow and sub-zero temperatures. Even turbulent air and anabatic winds in the vicinity of the weather station are recorded
- Wind sensor monitoring: If the wind measurement value changes by less than ± 0.5 m/s within 48 hours, the maximum measurement value of 35 m/s is output as a fault message. All wind alarms with a limit value below 35 m/s become active as a result
- 3 threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- Configuration is made using the KNX software ETS
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall or pole |
| Protection class | IP44 |
| Dimensions (W x H x D) | 96 mm × 100 mm × 128 mm |
| Total weight | ≈ 170 g |
| Ambient temperature | -30...+50°C |
| Storage temperature | -30...+70°C |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 254 |
| Assignments maximum | 255 |
| Communication objects | 81 |
| Rated voltage | 30V DC SELV |
| Power consumption | ≤ 10mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.8 mm s 5 mm |
| Duration after bus voltage restoration until data is received | ≈ 5 s |
| Supply: | |
| Voltage (Power supply unit must comply with EN 61558-1) |
20...30V DC SELV |
| Current [at] | ≤ 100mA [24 V DC] |
| Connection Push-in spring terminal Conductor cross-section Stripping length |
0.2 … 1.0 mm² 11 mm |
| Sensors: | |
| Heater rain sensor | ≈ 1.2 W |
| Measurement range wind | 0…35 m/s |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- Wind sensor with combined wall/pole mounting
- 2x stainless steel installation band for pole installation
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file VD2 (German, English, French, Italian, Spanish) as download
Filter by language:
RTF
KNX W, KNX RW, KNX W sl, KNX RW sl, KNX LW sl Tender Specifications
Status: 11.10.2023
Item No.: 70129, 70119, 70123, 70158, 70162, 70164
Languages:
en
KNX W Handbuch
Status: 29.08.2024
Item No.: 70123
Languages:
de
KNX W Manual
Status: 29.08.2024
Item No.: 70123
Languages:
en
KNX W Manual
Status: 29.08.2024
Item No.: 70123
Languages:
es
KNX W Manuel
Status: 29.08.2024
Item No.: 70123
Languages:
fr
KNX W Manuale
Status: 29.08.2024
Item No.: 70123
Languages:
it
ZIP
Elsner Weather Station / P03 /Suntracer KNX Drawing
Status: 12.10.2023
Item No.: 30145, 30151, 30140, 3093, 3094, 70127, 70129, 30147, 30114, 30159, 3096, 70123, 10150
Languages:
de, en, fr, it, es
ZIP
KNX W Application 1.2
Status: 07.06.2024
Item No.: 70123
Languages:
de, en, fr, it, es
KNX W Installation
Status: 29.08.2024
Item No.: 70123
Languages:
de, en, es, fr, it
Share Shopping Cart
×