KNX S4-B12 DES
Actuator for 4 Drives with 3 Limit Switches
KNX Actuator with Integrated Facade Control for Drives of Awnings, Blinds, Roller Shutters, Windows. 4 outputs 230 V AC, for drives with double limit switch. With Digital Inputs.
The KNX S4-B12 DES actuator is an electronic control device for controlling up to 4 motors with 3 limit switches. A 230 V AC power supply is needed for the actuator and motors.
- 4 motor outputs each for one motor with 3 limit switches (shutters with working position)
- Switch panel with 4 switch pairs and status LEDs
- 12 binary input for use as manual or bus button
- Position feedback of the movement position
- Position storage (movement position) via 1-bit object (storage and call-up, e.g. by button)
- Controls through internal or external automatic operation
- Integrated shading control for each motor output
- Scene control for movement position with 16 scenes per motor
- Blocking objects and alarm messages have different priorities so that safety functions always have priority (e.g. wind blocking)
- Manual or automatic control configuration per time or communication object Configuration is made using the KNX software ETS 5
| General: | |
| Housing | plastic |
| Colour | white |
| Assembly | in distribution boxes or small housings according to DINVDE0603 on 35 mm mounting rails according to DIN EN 60715 |
| Degree of protection after installa-tion in distributor | IP20 |
| Dimensions (W x H x D) | 107mm × 88mm × 60mm |
| division units | 6 |
| Total weight | ≈ 340g |
| Ambient temperature | -5...+45°C |
| Ambient humidity (RH) (non-con-densing) | 0...95% |
| Storage temperature | -25...+70°C |
| Protective class | II |
| Overvoltage category | III |
| Pollution degree | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 1024 |
| Assignments maximum | 1024 |
| Communication objects | 757 |
| Rated voltage | 30V DC SELV |
| Power consumption | 10mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0,8 mm s 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5 s |
| Inputs: | |
| Binary input (FELV) • Input voltage range • Contact current [at] "-" contact (reference potential for all inputs) "+" contact (9...19 V DC, power supply for push-button, use optional) |
12 × 8...32 V DC 1mA [32 V DC] |
| Connection spring terminals | |
| Conductor cross-section | |
| • solid | 0.2…2.5 mm² |
| • fine-stranded | 0.2…1.5 mm² |
| • fine-stranded with ferrule with and without plastic sleeve | 0.25…1.5 mm² |
| • Stripping length one wire per terminal | 7.5mm |
| Maximum cable length | 50m |
| Supply: | |
| Voltage | 230V AC / 50 Hz |
| Power consumption max. typ. |
3.5 W 2.5 W |
| Outputs: | |
| Drive with 2 lower limit switches (UP/DOWN1/DOWN2) max. 500 VA per output |
4 × |
| Connection of supply and out-puts: | |
| Spring terminals | |
| Conductor cross-section | |
| • solid | 0.2…4 mm² |
| • fine-stranded | 0.2…2.5 mm² |
| • fine-stranded with ferrule without plastic sleeve | 0.25…2.5 mm² |
| • fine-stranded with ferrule with plastic sleeve | 0.25…1.5 mm² |
| • Stripping length 16 A per terminal one wire per terminal |
7mm |
- Actuator
- KNX plug-in terminal
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
Item No.: 70535
Languages:
ZIP
RTF
ZIP
Item No.: 70533, 70535
Languages:
The KNX S4-B12 DES actuator is an electronic control device for controlling up to 4 motors with 3 limit switches. A 230 V AC power supply is needed for the actuator and motors.
- 4 motor outputs each for one motor with 3 limit switches (shutters with working position)
- Switch panel with 4 switch pairs and status LEDs
- 12 binary input for use as manual or bus button
- Position feedback of the movement position
- Position storage (movement position) via 1-bit object (storage and call-up, e.g. by button)
- Controls through internal or external automatic operation
- Integrated shading control for each motor output
- Scene control for movement position with 16 scenes per motor
- Blocking objects and alarm messages have different priorities so that safety functions always have priority (e.g. wind blocking)
- Manual or automatic control configuration per time or communication object Configuration is made using the KNX software ETS 5
| General: | |
| Housing | plastic |
| Colour | white |
| Assembly | in distribution boxes or small housings according to DINVDE0603 on 35 mm mounting rails according to DIN EN 60715 |
| Degree of protection after installa-tion in distributor | IP20 |
| Dimensions (W x H x D) | 107mm × 88mm × 60mm |
| division units | 6 |
| Total weight | ≈ 340g |
| Ambient temperature | -5...+45°C |
| Ambient humidity (RH) (non-con-densing) | 0...95% |
| Storage temperature | -25...+70°C |
| Protective class | II |
| Overvoltage category | III |
| Pollution degree | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 1024 |
| Assignments maximum | 1024 |
| Communication objects | 757 |
| Rated voltage | 30V DC SELV |
| Power consumption | 10mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0,8 mm s 5mm |
| Duration after bus voltage restora-tion until data is received | ≈ 5 s |
| Inputs: | |
| Binary input (FELV) • Input voltage range • Contact current [at] "-" contact (reference potential for all inputs) "+" contact (9...19 V DC, power supply for push-button, use optional) |
12 × 8...32 V DC 1mA [32 V DC] |
| Connection spring terminals | |
| Conductor cross-section | |
| • solid | 0.2…2.5 mm² |
| • fine-stranded | 0.2…1.5 mm² |
| • fine-stranded with ferrule with and without plastic sleeve | 0.25…1.5 mm² |
| • Stripping length one wire per terminal | 7.5mm |
| Maximum cable length | 50m |
| Supply: | |
| Voltage | 230V AC / 50 Hz |
| Power consumption max. typ. |
3.5 W 2.5 W |
| Outputs: | |
| Drive with 2 lower limit switches (UP/DOWN1/DOWN2) max. 500 VA per output |
4 × |
| Connection of supply and out-puts: | |
| Spring terminals | |
| Conductor cross-section | |
| • solid | 0.2…4 mm² |
| • fine-stranded | 0.2…2.5 mm² |
| • fine-stranded with ferrule without plastic sleeve | 0.25…2.5 mm² |
| • fine-stranded with ferrule with plastic sleeve | 0.25…1.5 mm² |
| • Stripping length 16 A per terminal one wire per terminal |
7mm |
- Actuator
- KNX plug-in terminal
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
Item No.: 70535
Languages:
Item No.: 70535
Languages:
Item No.: 70535
Languages:
Item No.: 70535
Languages:
Item No.: 70535
Languages:
Item No.: 70535
Languages:
ZIP
Item No.: 70535
Languages:
RTF
Item No.: 70535
Languages:
ZIP
Item No.: 70533, 70535
Languages: