KNX L
Brightness Sensor
Brightness Sensor (sun and light sensor) for KNX
The KNX L brightness sensor measures the intensity of illumination and transfers the value to the KNX system. Six switching outputs with adjustable threshold values as well as additional AND and OR logic gates are available. The sensor system, the evaluation electronics and the electronics of the bus connection are mounted in a compact housing.
- Brightness measurement: The current light intensity is measured by a sensor
- 3 threshold values for twilight (up to 1000 lux), 3 for daylight (1-99 klux), can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- Configuration is made using the KNX software ETS
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall or pole |
| Protection class | IP 44 |
| Dimensions (W x H x D) | 96 mm × 77 mm × 118 mm |
| Total weight | ≈ 150 g |
| Ambient temperature | -30...+50 °C |
| Storage temperature | -30...+70 °C |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 254 |
| Assignments maximum | 255 |
| Communication objects | 117 |
| Rated voltage | 30V DC SELV |
| Power consumption | ≤ 10 mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.6…0.8 mm s 5 mm |
| Duration after bus voltage restoration until data is received |
≈ 5 s |
| Sensors: | |
| Measurement range brightness | 0 Lux … 150 000 Lux |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- Brightness sensor with combined wall/pole mounting
- 2 worm drive hose clips for pole mounting (Ø 40-60 mm)
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file VD2 (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
RTF
Item No.: 70129, 70119, 70123, 70158, 70162, 70164
Languages:
ZIP
Item No.: 10115, 30159, 701, 70119, 70157, 10110, 10130, 10131
Languages:
The KNX L brightness sensor measures the intensity of illumination and transfers the value to the KNX system. Six switching outputs with adjustable threshold values as well as additional AND and OR logic gates are available. The sensor system, the evaluation electronics and the electronics of the bus connection are mounted in a compact housing.
- Brightness measurement: The current light intensity is measured by a sensor
- 3 threshold values for twilight (up to 1000 lux), 3 for daylight (1-99 klux), can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- Configuration is made using the KNX software ETS
| General: | |
| Housing | plastic |
| Colour | white/translucent |
| Assembly | On-wall or pole |
| Protection class | IP 44 |
| Dimensions (W x H x D) | 96 mm × 77 mm × 118 mm |
| Total weight | ≈ 150 g |
| Ambient temperature | -30...+50 °C |
| Storage temperature | -30...+70 °C |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses maximum | 254 |
| Assignments maximum | 255 |
| Communication objects | 117 |
| Rated voltage | 30V DC SELV |
| Power consumption | ≤ 10 mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.6…0.8 mm s 5 mm |
| Duration after bus voltage restoration until data is received |
≈ 5 s |
| Sensors: | |
| Measurement range brightness | 0 Lux … 150 000 Lux |
| Manufacturer: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Germany info@elsner-elektronik.de Made in Germany |
- Brightness sensor with combined wall/pole mounting
- 2 worm drive hose clips for pole mounting (Ø 40-60 mm)
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file VD2 (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 70119
Languages:
Item No.: 70119
Languages:
Item No.: 70119
Languages:
Item No.: 70119
Languages:
Item No.: 70119
Languages:
Item No.: 70119
Languages:
RTF
Item No.: 70129, 70119, 70123, 70158, 70162, 70164
Languages:
ZIP
Item No.: 10115, 30159, 701, 70119, 70157, 10110, 10130, 10131
Languages:
Item No.: 70119
Languages:
Item No.: 70119
Languages: