KNX eTR 208 Light/Sunblind
Button for Temperature,Light and Solar Protection
KNX heating controller with temperature sensor, blinds/sunshade operation and light operation
as low as
€148.00
as low as
incl. 19% VAT, excl. shipping
Item No.:
Item No.: 00455
Item No.:
Item No.: 00455
Description
The KNX eTR 208 Light/Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature, light and solar protection. LEDs are integrated in these areas and their behaviour can be adjusted.
A temperature sensor is integrated into KNX eTR 208 Light/Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
The KNX eTR 208 Light/Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons. Communication objects can be linked via AND and OR logic gates.
Models:
71194 KNX eTR 208 Light/Sunblind, black RAL 9005 – Version with locking screw on the bottom of the housing
71193 KNX eTR 208 Light/Sunblind, white RAL 9003 – Version with locking screw on the bottom of the housing
71192 KNX eTR 208 Light/Sunblind, black RAL 9005 – Discontinued model, no longer produced
71190 KNX eTR 208 Light/Sunblind, white RAL 9003 – Discontinued model, no longer produced
Note on the changeover of the eTR series housing from January 2025:
The new models have a locking screw on the bottom of the housing. This makes it more difficult to remove the device from the wall. It can only be installed and uninstalled with a tool (screwdriver). The new design thus creates a barrier to unauthorised tampering. The installation depth of the new models is increased by approx. 0.5 mm. Appearance, range of functions and ETS application remain the same.
Functions
- Operating zone for temperature control with 2 areas (warmer, cooler)
- Operating zone for light with 2 areas (switching and dimming)
- Operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form
of communications objects) can be used as inputs for the logic gates. The
output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Configuration is made using the KNX software as of ETS 5
Technical data
| General: | |
| Casing | Genuine glass, plastic |
| Colours (similar) | RAL 9003 (white) RAL 9005 (black) |
| Degree of protection | IP20 |
| Size (W × H) | 81.5 mm × 81.5 mm |
| Mounting depth | 12.5 mm |
| Total weight | ≈ 70 g |
| Ambient temperature | -5…+45°C |
| RH (relative humidity), non-condensing | 0...95 % |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Pollution degree | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | 98 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 25mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.8 mm s 5 mm |
| Connection spring-loaded terminals Conductor diameter Stripping length |
Ø 0.8 mm s 7...9 mm |
| Duration after bus voltage restoration until data is received | ≈ 5 s |
| Sensor: | |
| Temperature measurement range | -5…+60°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
Scope of delivery & Accessories
- Room temperature controller with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Accessory Items
Filter by language:
RTF
KNX eTR 208 Light/Sunblind Tender Specifications
Status: 21.05.2024
Item No.: 71190, 71192
Languages:
en
KNX eTR 208 Light/Sunblind Handbuch
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
de
KNX eTR 208 Light/Sunblind Manual
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
en
KNX eTR 208 Light/Sunblind Manual
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
es
KNX eTR 208 Light/Sunblind Manuale
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
it
KNX eTR 208 Light/Sunblind Manuel
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
fr
ZIP
KNX eTR 208 Light/Sunblind Application 1.0
Status: 11.10.2023
Item No.: 71190, 71192, 71193, 71194
Languages:
de, en, fr, it, es
KNX eTR 208 Light/Sunblind Installation
Status: 11.10.2023
Item No.: 71190, 71192
Languages:
de, en, fr, it, es
ZIP
KNX eTR Series BIM data revit
Status: 12.10.2023
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190, 30192
Languages:
de, en, fr, it, es
KNX eTR 208 Light/Sunblind Installation "locking screw"
Status: 02.04.2025
Item No.: 71193, 71194
Languages:
de, en, es, fr, it
-
Description
-
Functions
-
Technical data
-
Scope of delivery & Accessories
-
Downloads
The KNX eTR 208 Light/Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature, light and solar protection. LEDs are integrated in these areas and their behaviour can be adjusted.
A temperature sensor is integrated into KNX eTR 208 Light/Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
The KNX eTR 208 Light/Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons. Communication objects can be linked via AND and OR logic gates.
Models:
71194 KNX eTR 208 Light/Sunblind, black RAL 9005 – Version with locking screw on the bottom of the housing
71193 KNX eTR 208 Light/Sunblind, white RAL 9003 – Version with locking screw on the bottom of the housing
71192 KNX eTR 208 Light/Sunblind, black RAL 9005 – Discontinued model, no longer produced
71190 KNX eTR 208 Light/Sunblind, white RAL 9003 – Discontinued model, no longer produced
Note on the changeover of the eTR series housing from January 2025:
The new models have a locking screw on the bottom of the housing. This makes it more difficult to remove the device from the wall. It can only be installed and uninstalled with a tool (screwdriver). The new design thus creates a barrier to unauthorised tampering. The installation depth of the new models is increased by approx. 0.5 mm. Appearance, range of functions and ETS application remain the same.
- Operating zone for temperature control with 2 areas (warmer, cooler)
- Operating zone for light with 2 areas (switching and dimming)
- Operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form
of communications objects) can be used as inputs for the logic gates. The
output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Configuration is made using the KNX software as of ETS 5
| General: | |
| Casing | Genuine glass, plastic |
| Colours (similar) | RAL 9003 (white) RAL 9005 (black) |
| Degree of protection | IP20 |
| Size (W × H) | 81.5 mm × 81.5 mm |
| Mounting depth | 12.5 mm |
| Total weight | ≈ 70 g |
| Ambient temperature | -5…+45°C |
| RH (relative humidity), non-condensing | 0...95 % |
| Storage temperature | -25...+70°C |
| Overvoltage category | III |
| Pollution degree | 2 |
| KNX bus: | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses max. | 254 |
| Assignments max. | 254 |
| Communication objects | 98 |
| Nominal voltage | 30V DC SELV |
| Power consumption | ≤ 25mA |
| Connection KNX plug-in terminal Conductor diameter Stripping length |
Ø 0.8 mm s 5 mm |
| Connection spring-loaded terminals Conductor diameter Stripping length |
Ø 0.8 mm s 7...9 mm |
| Duration after bus voltage restoration until data is received | ≈ 5 s |
| Sensor: | |
| Temperature measurement range | -5…+60°C |
Manufacturer:
Elsner Elektronik GmbH
Sohlengrund 16
75395 Ostelsheim
Germany
info@elsner-elektronik.de
Made in Germany
- Room temperature controller with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Accessory Items
Filter by language:
RTF
KNX eTR 208 Light/Sunblind Tender Specifications
Status: 21.05.2024
Item No.: 71190, 71192
Languages:
en
KNX eTR 208 Light/Sunblind Handbuch
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
de
KNX eTR 208 Light/Sunblind Manual
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
en
KNX eTR 208 Light/Sunblind Manual
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
es
KNX eTR 208 Light/Sunblind Manuale
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
it
KNX eTR 208 Light/Sunblind Manuel
Status: 02.04.2025
Item No.: 71190, 71192, 71193, 71194
Languages:
fr
ZIP
KNX eTR 208 Light/Sunblind Application 1.0
Status: 11.10.2023
Item No.: 71190, 71192, 71193, 71194
Languages:
de, en, fr, it, es
KNX eTR 208 Light/Sunblind Installation
Status: 11.10.2023
Item No.: 71190, 71192
Languages:
de, en, fr, it, es
ZIP
KNX eTR Series BIM data revit
Status: 12.10.2023
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190, 30192
Languages:
de, en, fr, it, es
KNX eTR 208 Light/Sunblind Installation "locking screw"
Status: 02.04.2025
Item No.: 71193, 71194
Languages:
de, en, es, fr, it
Share Shopping Cart
×