KNX eTR 101
Room Temperature Controller
KNX heating controller with temperature sensor
Highlights
-
-
Heating controller/thermostat
-
-
Glass surface with temperature display and +/- touch keys
-
-
Installation with or without socket
- - Awarded with the Red Dot Award: Product Design 2019 (Best of the Best)
The KNX eTR 101 has got an integrated PI controller for a heating and a cooling system (one or two step). The room temperature is adjusted by means of the + and - touch buttons.
Models:
N° 70650 KNX eTR 101, white
N° 70651 KNX eTR 101, black
- Measurement of temperature. Mixed value from own measured value and external values (proportions can be set in percentage), output of minimum and maximum values
- Display of the actual value or the target value/basic setpoint shift
- 2 touch buttons (+/-) vor adjustment of the room temperature
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Configuration is made using the KNX software ETS 5
General: | |
Casing Genuine glass, plastic | |
Colours (similar) | RAL 9003 (white) RAL 9005 (black) |
Degree of protection | IP20 |
Size (W × H) | 81.5 mm x 81.5 mm |
Mounting depth | 12 mm |
Total weight | ≈ 65 g |
Ambient temperature | -5…+45°C |
Ambient humidity (RH) (non-condensing) |
5...95% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Pollution degree | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 254 |
Assignments max. | 254 |
Communication objects | 41 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 18mA |
Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s |
Connection spring-loaded terminals | 5mm |
Conductor cross-section | |
solid and fine-stranded conductors | 0.2...0.75mm² |
fine-stranded conductors with ferrules | 0.25...0.34mm² |
Stripping length | 7...9mm |
Duration after bus voltage restora-tion until data is received | ≈ 5 s |
Sensor: | |
Temperature measurement range | -5…+60°C |
- Room temperature controller with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 70650
Languages:
RTF
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages:
The KNX eTR 101 has got an integrated PI controller for a heating and a cooling system (one or two step). The room temperature is adjusted by means of the + and - touch buttons.
Models:
N° 70650 KNX eTR 101, white
N° 70651 KNX eTR 101, black
- Measurement of temperature. Mixed value from own measured value and external values (proportions can be set in percentage), output of minimum and maximum values
- Display of the actual value or the target value/basic setpoint shift
- 2 touch buttons (+/-) vor adjustment of the room temperature
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Configuration is made using the KNX software ETS 5
General: | |
Casing Genuine glass, plastic | |
Colours (similar) | RAL 9003 (white) RAL 9005 (black) |
Degree of protection | IP20 |
Size (W × H) | 81.5 mm x 81.5 mm |
Mounting depth | 12 mm |
Total weight | ≈ 65 g |
Ambient temperature | -5…+45°C |
Ambient humidity (RH) (non-condensing) |
5...95% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Pollution degree | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 254 |
Assignments max. | 254 |
Communication objects | 41 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 18mA |
Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s |
Connection spring-loaded terminals | 5mm |
Conductor cross-section | |
solid and fine-stranded conductors | 0.2...0.75mm² |
fine-stranded conductors with ferrules | 0.25...0.34mm² |
Stripping length | 7...9mm |
Duration after bus voltage restora-tion until data is received | ≈ 5 s |
Sensor: | |
Temperature measurement range | -5…+60°C |
- Room temperature controller with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 70650
Languages:
Item No.: 70650, 70651
Languages:
Item No.: 70650, 70651
Languages:
Item No.: 70650, 70651
Languages:
Item No.: 70650, 70651
Languages:
Item No.: 70650, 70651
Languages:
RTF
Item No.: 70650, 70651
Languages:
Item No.: 70650, 70651
Languages:
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages: