Cala KNX IL CH, pure white RAL 9010
Indicator Light Green/Yellow/Red
Signal light red, yellow, green, luminous display
The LED area of the Cala KNX IL CH LED light signal can illuminate or flash in the colours green, yellow or red. This allows states to be visualised for the KNX bus system. E.g. threshold value violations, room occupancy or other status messages can be linked to Cala KNX IL. The colour changes if the set threshold values are exceeded / undercut or if the status changes.
The KNX application of the device offers further intelligent functions for the KNX system:
- AND/OR logic gates link states.
- Values received via communication object are compared and output in the control value comparator.
Cala KNX IL CH is inserted into a frame of the switch range used in the building and thus fits seamlessly into the interior design.
- Indicator light for visualising states (e. g. limit value violations, room occupation of status reports)
- Display (permanent or flashing) of one of the colours Green, Yellow or Red
- 4 AND and 4 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 control variable comparators to output minimum, maximum or average
values. 5 inputs each for values received via communication objects
General: | |
Casing Genuine glass, plastic, metal | Echtglas, Kunststoff, Metall |
Colour display | 34 mm × 34 mm |
Casing colour (similar) | RAL 9010 (white) |
Degree of protection (after assem-bly) | IP20 |
Size (W × H) Mounting depth |
60mm × 60mm ≥ 10mm |
Total weight | ≈ 55g |
Ambient temperature | 0…+45°C |
Ambient humidity (RH) (non-condensing) |
0...95% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 254 |
Assignments max. | 254 |
Communication objects | Cala KNX IL: 77 Cala KNX IL CO2 CH: 115 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 30mA |
Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
Duration after bus voltage restora-tion until data is received | ≈ 5s |
Sensors: | |
CO_{2} measurement range | Cala KNX IL: / Cala KNX IL CO2 CH: 400...5000 ppm |
- 60 mm insert with LED illuminated area
- Mounting adapter with screws
- KNX plug-in terminal
Accessories required
- Cover frame (for insert 60 x 60 mm)
- Mounting plate (77 mm)
- Inlet box
- Installation instructions (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download
Filter by language:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages:
The LED area of the Cala KNX IL CH LED light signal can illuminate or flash in the colours green, yellow or red. This allows states to be visualised for the KNX bus system. E.g. threshold value violations, room occupancy or other status messages can be linked to Cala KNX IL. The colour changes if the set threshold values are exceeded / undercut or if the status changes.
The KNX application of the device offers further intelligent functions for the KNX system:
- AND/OR logic gates link states.
- Values received via communication object are compared and output in the control value comparator.
Cala KNX IL CH is inserted into a frame of the switch range used in the building and thus fits seamlessly into the interior design.
- Indicator light for visualising states (e. g. limit value violations, room occupation of status reports)
- Display (permanent or flashing) of one of the colours Green, Yellow or Red
- 4 AND and 4 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 control variable comparators to output minimum, maximum or average
values. 5 inputs each for values received via communication objects
General: | |
Casing Genuine glass, plastic, metal | Echtglas, Kunststoff, Metall |
Colour display | 34 mm × 34 mm |
Casing colour (similar) | RAL 9010 (white) |
Degree of protection (after assem-bly) | IP20 |
Size (W × H) Mounting depth |
60mm × 60mm ≥ 10mm |
Total weight | ≈ 55g |
Ambient temperature | 0…+45°C |
Ambient humidity (RH) (non-condensing) |
0...95% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 254 |
Assignments max. | 254 |
Communication objects | Cala KNX IL: 77 Cala KNX IL CO2 CH: 115 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 30mA |
Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
Duration after bus voltage restora-tion until data is received | ≈ 5s |
Sensors: | |
CO_{2} measurement range | Cala KNX IL: / Cala KNX IL CO2 CH: 400...5000 ppm |
- 60 mm insert with LED illuminated area
- Mounting adapter with screws
- KNX plug-in terminal
Accessories required
- Cover frame (for insert 60 x 60 mm)
- Mounting plate (77 mm)
- Inlet box
- Installation instructions (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download
Filter by language:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages:
Item No.: 71381, 71391
Languages: