Windancer KNX(-GPS)
Weather station with cup anemometer
KNX weather stations with sensors for brightness, wind, precipitation, temperature. Logic gate. Optionally with time reception (position of the sun), shading control, timer.
The Windancer KNX(-GPS) weather station for the KNX building bus system measures temperature, wind speed, brightness and detects precipitation. All values can be used to control limit-dependent switching outputs. The states can be linked via AND logic gates and OR logic gates.
The Windancer KNX-GPS model additionally receives the GPS signal for time and location and calculates the exact position of the sun (azimuth and elevation). The integrated shading control allows the intelligent control of the sun protection of up to eight façades.
... more about Windancer KNX weather stations
Functions of both models:
- Wind measurement with cup anemometer
- Precipitation detection: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends
- Temperature measurement
- Switching outputs for all measured values. Threshold values can be adjusted per parameter or via communication objects
- 6 AND and 6 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output of each gate can be configured optionally as 1-bit or 2 x 8-bit
Functionel adicional Windancer KNX:
- Brightness measurement (current illuminance). Measurement with 3 separate sensors (east, south, west). Separate threshold values for night
Functionel adicional Windancer KNX-GPS:
- Brightness measurement (current illuminance). Measurement with 3 separate sensors, output of the current highest value (one maximum value). Separate threshold values for night
- GPS receiver, outputting the current time and location coordinates. The Weather Station Windancer KNX-GPS also computes the position of the sun (azimuth and elevation)
- Shade control for up to 8 façades with slat tracking and shadow edge tracking
- Weekly and calendar time switch: The weather station receives the time and date from the integrated GPS receiver. The weekly time switch switches up to 4 different periods per day. With the calendar time switch up to 3 additional time periods can be defined, in which up to 2 On/Off switches take place. The switching outputs can be used as communications objects. The switch times are set via parameters
General | |
Housing | plastic |
Colour | white/translucent |
Assembly | On-wall |
Protection class [according to] | IP44 [EN 60529] |
Dimensions (W x H x D) | 113 mm × 101 mm × 225 mm |
Total weight approx. | 260 g |
Ambient temperature | -25...+50 °C |
Storage temperature | -30...+70 °C |
KNX bus | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses maximum | 254 |
Assignments maximum | 254 |
Communication objects | 254 (with GPS) / 201 (without GPS) |
Power consumption | 20 mA |
Data output | KNX +/- |
Connection KNX plug terminals | 0.6…0.8 mm² s |
Stripping length | 5 mm |
Duration after bus voltage restora- tion until data is received approx | 5 s |
Supply | |
Auxiliary supply | 24 V DC ±10 % |
Auxiliary current max. [at] | 65 mA [24 V DC] |
Sensors | |
Measurement range temperature | -25...+50 °C |
Measurement range wind [at] | 2…30 m/s [25 °C] |
Measurement range brightness | 0 Lux … 150 000 Lux |
- Weather station
- 2x Stainless steel pan head screw, WN56, 4x50 mm, cross recess
- 2x dowel S 6
- 2x DIN 125 washer V2A, A4. 3 outer diameter 9 mm
- KNX plug-in terminal and plug-in terminal (white/yellow)
- Data sheet with installation instructions (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 71235
Languages:
RTF
Item No.: 71235, 71236
Languages:
Item No.: 71235, 71236
Languages:
ZIP
Item No.: 71236
Languages:
ZIP
Item No.: 71235, 71236
Languages:
ZIP
Item No.: 71235, 71236
Languages:
ZIP
Item No.: 71235, 71236
Languages:
Item No.: 71235
Languages:
Item No.: 71236
Languages:
The Windancer KNX(-GPS) weather station for the KNX building bus system measures temperature, wind speed, brightness and detects precipitation. All values can be used to control limit-dependent switching outputs. The states can be linked via AND logic gates and OR logic gates.
The Windancer KNX-GPS model additionally receives the GPS signal for time and location and calculates the exact position of the sun (azimuth and elevation). The integrated shading control allows the intelligent control of the sun protection of up to eight façades.
... more about Windancer KNX weather stations
Functions of both models:
- Wind measurement with cup anemometer
- Precipitation detection: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends
- Temperature measurement
- Switching outputs for all measured values. Threshold values can be adjusted per parameter or via communication objects
- 6 AND and 6 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output of each gate can be configured optionally as 1-bit or 2 x 8-bit
Functionel adicional Windancer KNX:
- Brightness measurement (current illuminance). Measurement with 3 separate sensors (east, south, west). Separate threshold values for night
Functionel adicional Windancer KNX-GPS:
- Brightness measurement (current illuminance). Measurement with 3 separate sensors, output of the current highest value (one maximum value). Separate threshold values for night
- GPS receiver, outputting the current time and location coordinates. The Weather Station Windancer KNX-GPS also computes the position of the sun (azimuth and elevation)
- Shade control for up to 8 façades with slat tracking and shadow edge tracking
- Weekly and calendar time switch: The weather station receives the time and date from the integrated GPS receiver. The weekly time switch switches up to 4 different periods per day. With the calendar time switch up to 3 additional time periods can be defined, in which up to 2 On/Off switches take place. The switching outputs can be used as communications objects. The switch times are set via parameters
General | |
Housing | plastic |
Colour | white/translucent |
Assembly | On-wall |
Protection class [according to] | IP44 [EN 60529] |
Dimensions (W x H x D) | 113 mm × 101 mm × 225 mm |
Total weight approx. | 260 g |
Ambient temperature | -25...+50 °C |
Storage temperature | -30...+70 °C |
KNX bus | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses maximum | 254 |
Assignments maximum | 254 |
Communication objects | 254 (with GPS) / 201 (without GPS) |
Power consumption | 20 mA |
Data output | KNX +/- |
Connection KNX plug terminals | 0.6…0.8 mm² s |
Stripping length | 5 mm |
Duration after bus voltage restora- tion until data is received approx | 5 s |
Supply | |
Auxiliary supply | 24 V DC ±10 % |
Auxiliary current max. [at] | 65 mA [24 V DC] |
Sensors | |
Measurement range temperature | -25...+50 °C |
Measurement range wind [at] | 2…30 m/s [25 °C] |
Measurement range brightness | 0 Lux … 150 000 Lux |
- Weather station
- 2x Stainless steel pan head screw, WN56, 4x50 mm, cross recess
- 2x dowel S 6
- 2x DIN 125 washer V2A, A4. 3 outer diameter 9 mm
- KNX plug-in terminal and plug-in terminal (white/yellow)
- Data sheet with installation instructions (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 71235
Languages:
RTF
Item No.: 71235, 71236
Languages:
Item No.: 71235, 71236
Languages:
Item No.: 71235, 71236
Languages:
Item No.: 71235, 71236
Languages:
Item No.: 71235, 71236
Languages:
Item No.: 71235, 71236
Languages:
Item No.: 71235, 71236
Languages:
ZIP
Item No.: 71236
Languages:
ZIP
Item No.: 71235, 71236
Languages:
ZIP
Item No.: 71235, 71236
Languages:
ZIP
Item No.: 71235, 71236
Languages:
Item No.: 71235
Languages:
Item No.: 71236
Languages:
Item No.: 71236
Languages: