KNX R1-B4 compact 16 A
Actuator with 1 Potential-Free Switching Output
KNX actuator with potential-free relay output for switching loads up to 16 A. Timer functions. 4 binary inputs
The potential-free output of the Actuator switches one consumer. Time functions such as an on/off delay or a staircase lighting function can be configured in the device application.
4 digital inputs are available for the connection of normally open contacts like push-buttons.
- Free of potential relay output for a consumer load
- Timer functions: on and/or off delay, staircase lighting timer switch with adjustable prewarning (light blinks prior to switch-off)
- Scene control for switching state with 8 scenes
- 4 binary inputs
Configuration is made using the KNX software ETS 5.
General: | |
Casing | plastic |
Colour | white |
Degree of protection | IP00 |
Dimensions Ø × H | 53mm × 24mm |
Total weight | ≈ 45g |
Ambient temperature | -5...+45°C |
Ambient humidity (RH) (non-condensing) |
5...80% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Pollution degree | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses maximum | 254 |
Assignments maximum | 254 |
Communication objects | 45 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 10mA |
Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
Duration after bus voltage restora-tion until data is received | ≈ 5 s |
Binary inputs: | |
Number | 4 |
Type Contacts |
|
Design are at KNX potential |
(SELV) |
Pluggable cable: length | 30cm |
Pluggable cable: wire end ferrule | 0.14mm², 8mm |
Maximum cable length | 10m |
Contact voltage | ≈ 5V |
Contact current | ≈ 0.5mA |
Potential free output: | |
Number | 1 |
Screw terminals for one wire per terminal |
0.2...4.0mm² |
Normally open contact | μ (< 1.2mm) |
Rated voltage | 250V AC |
Switching current: Resistive Incandescent lamp LEDi electronic ballast |
16A 8A 400 W 200 μF/16 A |
- Actuator
- KNX plug-in terminal
- Connection line for binary inputs
- Braided hose for KNX cable and for connection line for inputs
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 70574
Languages:
Item No.: 70574
Languages:
RTF
Item No.: 70574
Languages:
The potential-free output of the Actuator switches one consumer. Time functions such as an on/off delay or a staircase lighting function can be configured in the device application.
4 digital inputs are available for the connection of normally open contacts like push-buttons.
- Free of potential relay output for a consumer load
- Timer functions: on and/or off delay, staircase lighting timer switch with adjustable prewarning (light blinks prior to switch-off)
- Scene control for switching state with 8 scenes
- 4 binary inputs
Configuration is made using the KNX software ETS 5.
General: | |
Casing | plastic |
Colour | white |
Degree of protection | IP00 |
Dimensions Ø × H | 53mm × 24mm |
Total weight | ≈ 45g |
Ambient temperature | -5...+45°C |
Ambient humidity (RH) (non-condensing) |
5...80% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Pollution degree | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses maximum | 254 |
Assignments maximum | 254 |
Communication objects | 45 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 10mA |
Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
Duration after bus voltage restora-tion until data is received | ≈ 5 s |
Binary inputs: | |
Number | 4 |
Type Contacts |
|
Design are at KNX potential |
(SELV) |
Pluggable cable: length | 30cm |
Pluggable cable: wire end ferrule | 0.14mm², 8mm |
Maximum cable length | 10m |
Contact voltage | ≈ 5V |
Contact current | ≈ 0.5mA |
Potential free output: | |
Number | 1 |
Screw terminals for one wire per terminal |
0.2...4.0mm² |
Normally open contact | μ (< 1.2mm) |
Rated voltage | 250V AC |
Switching current: Resistive Incandescent lamp LEDi electronic ballast |
16A 8A 400 W 200 μF/16 A |
- Actuator
- KNX plug-in terminal
- Connection line for binary inputs
- Braided hose for KNX cable and for connection line for inputs
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 70574
Languages:
Item No.: 70574
Languages:
Item No.: 70574
Languages:
Item No.: 70574
Languages:
Item No.: 70574
Languages:
Item No.: 70574
Languages:
Item No.: 70574
Languages:
RTF
Item No.: 70574
Languages: