Sewi KNX L(-Pr)
Brightness Sensor
KNX-wall/ceiling sensor with brightness sensor, presence detector. With multi-function modules and logic gates
The Sewi KNX L sensor for the KNX bus system detects brightness, the Sewi KNX L-Pr also detects the presence of people in the room. The measured brightness value can be used to control limit-dependent switching outputs. The states can be linked via AND logic gates and OR logic gates. Multifunction modules change input data as required by calculations, querying a condition or converting the data point type.
Models:
N° 70395 Sewi KNX L brightness sensor, white
N° 70695 Sewi KNX L brightness sensor, jet black
N° 70396 Sewi KNX L-Pr brightness sensor with presence detector, white
N° 70696 Sewi KNX L-Pr brightness sensor with presence detector, jet black
- Switching outputs for all measured values. Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 8 multi-functional modules (computers) for changing the input data by calculations, by querying a condition or by converting the data point type
- Configuration is carried out with the KNX software ETS
Sewi KNX L: - Brightness measurement with brightness regulation
Sewi KNX L-Pr: - Brightness measurement with brightness regulation
- Presence of persons is detected
| General: | |
| Housing | Plastic |
| Colours | • White similar to signal white RAL 9003 (skirting)/ grey white RAL 9002 (cover) • Jet black RAL 9005 |
| Assembly | Surface, wall or ceiling installation |
| Dimensions Ø x height | approx. 105 mm x approx. 32 mm |
| Degree of protection | IP 30 |
| Weight | ca. 45-80g |
| Ambient humidity | 5...85% - 95% RH, non-condensing |
| KNX bus: | |
| KNX medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses | max. 2000 |
| Assignments | max. 2000 |
| Communication object | Sewi KNX L: 189 Sewi KNX L-Pr: 230 |
| Nominal voltage KNX | 30 V DC SELV |
| Power consumption KNX | max. 10-20 mA |
| Connection | KNX plug terminals |
| Duration after bus voltage restoration until data is received | approx. 5 seconds |
| Brightness sensor: | |
| Measuring range | 0…2,000 Lux (higher values can be measured and output) |
| Presence sensor: | |
| Detection method | Passive infrared method (PIR) |
| Coverage angle | approx. 94° × 82° (see also Coverage area of the presence detector) |
| Range | approx. 5 m |
- Sensor for ceiling installation
- Data sheet with installation instructions (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download
Filter by language:
RTF
Item No.: 70397, 70697, 70399, 70699, 70398, 70698, 70694, 70393, 70693, 70392, 70692, 70395, 70396, 70695, 70696
Languages:
ZIP
Item No.: 70395
Languages:
ZIP
Item No.: 70396
Languages:
The Sewi KNX L sensor for the KNX bus system detects brightness, the Sewi KNX L-Pr also detects the presence of people in the room. The measured brightness value can be used to control limit-dependent switching outputs. The states can be linked via AND logic gates and OR logic gates. Multifunction modules change input data as required by calculations, querying a condition or converting the data point type.
Models:
N° 70395 Sewi KNX L brightness sensor, white
N° 70695 Sewi KNX L brightness sensor, jet black
N° 70396 Sewi KNX L-Pr brightness sensor with presence detector, white
N° 70696 Sewi KNX L-Pr brightness sensor with presence detector, jet black
- Switching outputs for all measured values. Threshold values can be adjusted per parameter or via communication objects
- 8 AND and 8 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 8 multi-functional modules (computers) for changing the input data by calculations, by querying a condition or by converting the data point type
- Configuration is carried out with the KNX software ETS
Sewi KNX L: - Brightness measurement with brightness regulation
Sewi KNX L-Pr: - Brightness measurement with brightness regulation
- Presence of persons is detected
| General: | |
| Housing | Plastic |
| Colours | • White similar to signal white RAL 9003 (skirting)/ grey white RAL 9002 (cover) • Jet black RAL 9005 |
| Assembly | Surface, wall or ceiling installation |
| Dimensions Ø x height | approx. 105 mm x approx. 32 mm |
| Degree of protection | IP 30 |
| Weight | ca. 45-80g |
| Ambient humidity | 5...85% - 95% RH, non-condensing |
| KNX bus: | |
| KNX medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses | max. 2000 |
| Assignments | max. 2000 |
| Communication object | Sewi KNX L: 189 Sewi KNX L-Pr: 230 |
| Nominal voltage KNX | 30 V DC SELV |
| Power consumption KNX | max. 10-20 mA |
| Connection | KNX plug terminals |
| Duration after bus voltage restoration until data is received | approx. 5 seconds |
| Brightness sensor: | |
| Measuring range | 0…2,000 Lux (higher values can be measured and output) |
| Presence sensor: | |
| Detection method | Passive infrared method (PIR) |
| Coverage angle | approx. 94° × 82° (see also Coverage area of the presence detector) |
| Range | approx. 5 m |
- Sensor for ceiling installation
- Data sheet with installation instructions (German, English, French, Italian, Spanish)
- Product file (German, English, French, Italian or Spanish) as download
- Manual (German, English, French, Italian or Spanish) as download
Filter by language:
RTF
Item No.: 70397, 70697, 70399, 70699, 70398, 70698, 70694, 70393, 70693, 70392, 70692, 70395, 70396, 70695, 70696
Languages:
Item No.: 70395, 70695
Languages:
Item No.: 70395, 70695
Languages:
Item No.: 70395, 70695
Languages:
Item No.: 70395, 70695
Languages:
Item No.: 70395, 70695
Languages:
Item No.: 70395, 70695
Languages:
Item No.: 70395, 70695
Languages:
Item No.: 70395, 70695
Languages:
Item No.: 70395, 70695
Languages:
Item No.: 70395, 70695
Languages:
ZIP
Item No.: 70395
Languages:
Item No.: 70396, 70696
Languages:
Item No.: 70396, 70696
Languages:
Item No.: 70396, 70696
Languages:
Item No.: 70396, 70696
Languages:
Item No.: 70396, 70696
Languages:
Item No.: 70396, 70696
Languages:
Item No.: 70396, 70696
Languages:
Item No.: 70396, 70696
Languages:
Item No.: 70396, 70696
Languages:
Item No.: 70396, 70696
Languages:
ZIP
Item No.: 70396
Languages: