KNX eTR MultiTouch Light/Sunblind
Button for Temperature, 2x Solar Protection
KNX touch controller with sensor and control functions
The KNX eTR MultiTouch Light/Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the light and temperature. Coloured LEDs (one white LED in the light symbol, one red and one blue LED in the thermometer symbol and three white LEDs each for level indication) are integrated in these areas and their behaviour can be adjusted. Additionally, there is an area for moving blinds/sun shades (up/down).
A temperature sensor is integrated into KNX eTR MultiTouch Light/Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
The KNX eTR MultiTouch Light/Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons.
Communication objects can be linked via AND and OR logic gates.
Models:
No. 71060 KNX eTR MultiTouch Light/Sunblind, signal white RAL 9003
No. 71062 KNX eTR MultiTouch Light/Sunblind, jet black RAL 9005
- Operating zone for light with 3 areas (switching and dimming)
- Operating zone for blinds, awnings, shutters or windows with 3 areas (up/ down with short/long distinction, driving position)
- Operating zone for temperature control with 3 areas (warmer, cooler, changeover heating/cooling)
- A total of 9 areas, all of which can be assigned either to the intended bus functions or to other individual bus functions (switches, changeover switches, dimmers, blinds, awnings, shutters, windows, 8- or 16-bit encoders, scene call/saving)
- LEDs can be set. All LEDs Off, all LEDs On, active LEDs Always On, all LEDs On for specific time after button pressed, active LEDs On for specific time after button pressed. Settable, as to whether LED flashes at block object value = 1. LED brightness can be pre-set for day and night
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Scene control. 3 scene channels with 5 objects each
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 4 AND and 4 OR logic gates each with 4 inputs. All switching events as well as 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- Configuration is made using the KNX software ETS
| Casing | Genuine glass, plastic |
| Colours | • similar to RAL 9003 signal white • similar to RAL 9005 deep black |
| Installation | on-wall (directly or with a socket Ø 60 mm, resp. cavity wall socket for hole Ø 68 mm) |
| Degree of protection | IP 10 |
| Dimensions housing | approx. 81,5 x 81,5 (W x H, mm), mounting depth approx. 12 mm |
| Total weight | approx. 70 g |
| Ambient temperature | Operating 0…+55°C, storage -30…+85°C |
| Ambient humidity | 5...95% RH, avoid condensation |
| Operating voltage | KNX bus voltage |
| Bus current | max. 15 mA |
| Data | output KNX +/- Bus plug-in terminal |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | 199 |
| Temperature measurement range | 0…+55°C |
| Temperature resolution | 0.1°C |
- Push button with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
RTF
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
ZIP
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages:
The KNX eTR MultiTouch Light/Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the light and temperature. Coloured LEDs (one white LED in the light symbol, one red and one blue LED in the thermometer symbol and three white LEDs each for level indication) are integrated in these areas and their behaviour can be adjusted. Additionally, there is an area for moving blinds/sun shades (up/down).
A temperature sensor is integrated into KNX eTR MultiTouch Light/Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
The KNX eTR MultiTouch Light/Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons.
Communication objects can be linked via AND and OR logic gates.
Models:
No. 71060 KNX eTR MultiTouch Light/Sunblind, signal white RAL 9003
No. 71062 KNX eTR MultiTouch Light/Sunblind, jet black RAL 9005
- Operating zone for light with 3 areas (switching and dimming)
- Operating zone for blinds, awnings, shutters or windows with 3 areas (up/ down with short/long distinction, driving position)
- Operating zone for temperature control with 3 areas (warmer, cooler, changeover heating/cooling)
- A total of 9 areas, all of which can be assigned either to the intended bus functions or to other individual bus functions (switches, changeover switches, dimmers, blinds, awnings, shutters, windows, 8- or 16-bit encoders, scene call/saving)
- LEDs can be set. All LEDs Off, all LEDs On, active LEDs Always On, all LEDs On for specific time after button pressed, active LEDs On for specific time after button pressed. Settable, as to whether LED flashes at block object value = 1. LED brightness can be pre-set for day and night
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Scene control. 3 scene channels with 5 objects each
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 4 AND and 4 OR logic gates each with 4 inputs. All switching events as well as 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- Configuration is made using the KNX software ETS
| Casing | Genuine glass, plastic |
| Colours | • similar to RAL 9003 signal white • similar to RAL 9005 deep black |
| Installation | on-wall (directly or with a socket Ø 60 mm, resp. cavity wall socket for hole Ø 68 mm) |
| Degree of protection | IP 10 |
| Dimensions housing | approx. 81,5 x 81,5 (W x H, mm), mounting depth approx. 12 mm |
| Total weight | approx. 70 g |
| Ambient temperature | Operating 0…+55°C, storage -30…+85°C |
| Ambient humidity | 5...95% RH, avoid condensation |
| Operating voltage | KNX bus voltage |
| Bus current | max. 15 mA |
| Data | output KNX +/- Bus plug-in terminal |
| Group addresses | max. 254 |
| Allocations | max. 254 |
| Communication objects | 199 |
| Temperature measurement range | 0…+55°C |
| Temperature resolution | 0.1°C |
- Push button with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
RTF
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
ZIP
Item No.: 71060, 71062
Languages:
Item No.: 71060, 71062
Languages:
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages: