Fabro KNX
Touch Panel
KNX touch panel for operating the building technology and for displaying values, data and alarm events
The Fabro KNX Touch Panel is an operating and display panel with IP 66 protection for the KNX building bus system. A robust aluminium housing protects the 7-inch screen with real glass touch surface. 8 areas can be displayed on each of 5 display pages. Texts, values, a symbol and a colour field are displayed in each area. Functions with objects from 1 bit (switching) to 14 bytes (text) are assigned to the areas.
In the application, 8 AND and 8 OR logic links as well as 8 multifunction modules for calculation, conditions and data conversion are available. 8 alarm input objects can trigger text displays or beeps on the Fabro KNX.
... more about the Fabro KNX touchpanel
- KNX-Steuerung mit Zugriff auf die Teilnehmer im KNX-Gebäudebus-System
- Farb-Touch-Display 7 Zoll zur manuellen Bedienung und zur Systemeinrichtung
- 5 Anzeige-Seiten, die mit je 8 unterschiedlichen Flächen für Bedienung oder Anzeige konfiguriert werden können. Z. B. Schalter, Taster, Werte-Anzeige
- Bildschirmschoner (Uhr, Aus) ein- und ausschaltbar
- Tastenton ein- und ausschaltbar
- 8 UND- und 8 ODER-Logik-Gatter mit je 4 Eingängen. Als Eingänge für die Logik-Gatter können sämtliche Schalt-Ereignisse sowie 16 Logikeingänge in Form von Kommunikationsobjekten genutzt werden. Der Ausgang jedes Gatters kann wahlweise als 1 Bit oder 2 x 8 Bit konfiguriert werden
- 8 Multifunktions-Module (Berechner) zur Veränderung von Eingangsdaten durch Berechnungen, durch Abfrage einer Bedingung oder durch Wandlung des Datenpunkttyps
Die Konfiguration erfolgt mit der KNX-Software ETS.
General | |
Housing | Housing anodised aluminium, real glass |
Assembly | Wall mounting on surface |
Colour | RAL 9005 jet black |
Size | approx.191 mm × 121 mm × 23 mm |
Weight | with cable approx 950 g |
Display resolution | 800 × 480 px |
Ambient and temperature | -20…+55 °C |
Ambient humidity (RH) (non-condensing) | 5...80 % |
Storage temperature | -30...+80 °C |
Degree of protection | IP 66 |
Overvoltage category | III |
Degree of contamination | 2 |
Length connection cable | 3 m |
Conductor diameter connection terminals Solid/multi-stranded conductor Fine stranded conductor | 0,2…4 mm² / 24…12 AWG 0,14…4 mm² / 24…12 AWG |
Stripping length | 11 mm |
KNX Bus | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max | 1024 |
Assignments max. | 1024 |
Communication objects | 336 |
Nominal voltage (Potenzial ≠ Hilfsspannung) | 30 V SELV |
Power consumption max. | 10 mA |
Wire red | KNX + |
Wire black | KNX - |
Duration after bus voltage restora tion until data is received approx. | 4 s |
Auxiliary voltage | |
Specification | DIN EN IEC 61558-1 (VDE 0570-1):2019-12 |
Nominal voltage | 24 V ±20% SELV |
Power consumption max. | 140 mA |
Wire yellow | + |
Wire white | - |
- Display with mount, grub screw M4 and connection line
- 4x lens head screw WN54
- 4x40 mm galvanised, cross-slotted
- 4x dowel SX6
- 4x 2-conductor connector
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 71270
Languages:
RTF
The Fabro KNX Touch Panel is an operating and display panel with IP 66 protection for the KNX building bus system. A robust aluminium housing protects the 7-inch screen with real glass touch surface. 8 areas can be displayed on each of 5 display pages. Texts, values, a symbol and a colour field are displayed in each area. Functions with objects from 1 bit (switching) to 14 bytes (text) are assigned to the areas.
In the application, 8 AND and 8 OR logic links as well as 8 multifunction modules for calculation, conditions and data conversion are available. 8 alarm input objects can trigger text displays or beeps on the Fabro KNX.
... more about the Fabro KNX touchpanel
- KNX-Steuerung mit Zugriff auf die Teilnehmer im KNX-Gebäudebus-System
- Farb-Touch-Display 7 Zoll zur manuellen Bedienung und zur Systemeinrichtung
- 5 Anzeige-Seiten, die mit je 8 unterschiedlichen Flächen für Bedienung oder Anzeige konfiguriert werden können. Z. B. Schalter, Taster, Werte-Anzeige
- Bildschirmschoner (Uhr, Aus) ein- und ausschaltbar
- Tastenton ein- und ausschaltbar
- 8 UND- und 8 ODER-Logik-Gatter mit je 4 Eingängen. Als Eingänge für die Logik-Gatter können sämtliche Schalt-Ereignisse sowie 16 Logikeingänge in Form von Kommunikationsobjekten genutzt werden. Der Ausgang jedes Gatters kann wahlweise als 1 Bit oder 2 x 8 Bit konfiguriert werden
- 8 Multifunktions-Module (Berechner) zur Veränderung von Eingangsdaten durch Berechnungen, durch Abfrage einer Bedingung oder durch Wandlung des Datenpunkttyps
Die Konfiguration erfolgt mit der KNX-Software ETS.
General | |
Housing | Housing anodised aluminium, real glass |
Assembly | Wall mounting on surface |
Colour | RAL 9005 jet black |
Size | approx.191 mm × 121 mm × 23 mm |
Weight | with cable approx 950 g |
Display resolution | 800 × 480 px |
Ambient and temperature | -20…+55 °C |
Ambient humidity (RH) (non-condensing) | 5...80 % |
Storage temperature | -30...+80 °C |
Degree of protection | IP 66 |
Overvoltage category | III |
Degree of contamination | 2 |
Length connection cable | 3 m |
Conductor diameter connection terminals Solid/multi-stranded conductor Fine stranded conductor | 0,2…4 mm² / 24…12 AWG 0,14…4 mm² / 24…12 AWG |
Stripping length | 11 mm |
KNX Bus | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max | 1024 |
Assignments max. | 1024 |
Communication objects | 336 |
Nominal voltage (Potenzial ≠ Hilfsspannung) | 30 V SELV |
Power consumption max. | 10 mA |
Wire red | KNX + |
Wire black | KNX - |
Duration after bus voltage restora tion until data is received approx. | 4 s |
Auxiliary voltage | |
Specification | DIN EN IEC 61558-1 (VDE 0570-1):2019-12 |
Nominal voltage | 24 V ±20% SELV |
Power consumption max. | 140 mA |
Wire yellow | + |
Wire white | - |
- Display with mount, grub screw M4 and connection line
- 4x lens head screw WN54
- 4x40 mm galvanised, cross-slotted
- 4x dowel SX6
- 4x 2-conductor connector
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 71270
Languages:
Item No.: 71270
Languages:
Item No.: 71270
Languages:
Item No.: 71270
Languages:
Item No.: 71270
Languages:
Item No.: 71270
Languages:
Item No.: 71270
Languages:
RTF
Item No.: 71270
Languages: