Nunio KNX M-T
Universal touch glass push button
Touch button with monochrome display, integrated glass frame
The Nunio KNX M-T push button is a touch switch that be universally used for the KNX building system. It has a monochrome touch display, on which buttons can be displayed in various arrangements. The functions of the buttons are defined individually. As a result, the sensor is extremely flexible with regard to changing requirements (change of tenant in residential or commercial properties, hotel rooms, etc.).
A temperature sensor is integrated into Nunio KNX M-T push button. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
Nunio KNX M-T has a PI controller for heating and cooling. A temperature control display can also be represented on the screen. The target temperature, mode and, if applicable, the fan speed can be set there.
Communication objects can be linked via AND and OR logic gates.
The switch-sized device has an integrated glass frame, which is backlit by the screen's lighting. It installed in a switch box.
- Display screen with one, two, three or four touch buttons. Icon and text selectable for each button. Each button can be configured as a switch, changer, drive (shutter, blind, awning or window with short/long difference), window, dimmer, 8 or 16-bit encoder or to call/save scenes
- Display lighting with adjustable basic and operating brightness. At both brightness levels, the outsides of the frame are also illuminated. The display can be switched off completely (standby).
- Area function if touched with the hand or when wiping. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Menu for temperature control with +/- buttons (warmer, cooler), target value display, mode selection button and fan speed setting
- Display lighting adjustable, including switched off in standby mode
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Control according to separate setpoints or basic setpoint temperature. With fan-coil control
- 2 AND and 2 OR logic gates each with 4 inputs. Switching events as well as 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- Configuration is made using the KNX software ETS 5
General | |
Casing Genuine glass, plastic | |
Colours (similar) | RAL 9010 pure white |
Size (W × H) | ≈ 85 mm × 85 mm |
Installation via socket | ≈ 10.5 mm |
Total depth | ≈ 31 mm |
Supporting ring (W × H) | ≈ 71 mm × 71 mm |
Total weight | ≈ 140 g |
Display resolution | 160 × 160 px |
Ambient temperature | -5…+45 °C |
Ambient humidity (RH) (non-condensing) | 5...80 % |
Storage temperature | -30...+80 °C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 254 |
Assignments max. | 254 |
Communication objects | 106 |
Nominal voltage | 30 V SELV |
Power consumption max. | 25 mA |
Connection KNX plug-in terminals | Conductor diameter: 0.6…0.8 mm s Stripping length: 5 mm |
Duration after bus voltage restoration until data is received | ≈ 5 s |
Sensor | |
Temperature measurement range | -5…+60 °C |
- Push button with integrated frame
- Supporting ring
- KNX plug-in terminal
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 71280
Languages:
RTF
Item No.: 71280
Languages:
ZIP
The Nunio KNX M-T push button is a touch switch that be universally used for the KNX building system. It has a monochrome touch display, on which buttons can be displayed in various arrangements. The functions of the buttons are defined individually. As a result, the sensor is extremely flexible with regard to changing requirements (change of tenant in residential or commercial properties, hotel rooms, etc.).
A temperature sensor is integrated into Nunio KNX M-T push button. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
Nunio KNX M-T has a PI controller for heating and cooling. A temperature control display can also be represented on the screen. The target temperature, mode and, if applicable, the fan speed can be set there.
Communication objects can be linked via AND and OR logic gates.
The switch-sized device has an integrated glass frame, which is backlit by the screen's lighting. It installed in a switch box.
- Display screen with one, two, three or four touch buttons. Icon and text selectable for each button. Each button can be configured as a switch, changer, drive (shutter, blind, awning or window with short/long difference), window, dimmer, 8 or 16-bit encoder or to call/save scenes
- Display lighting with adjustable basic and operating brightness. At both brightness levels, the outsides of the frame are also illuminated. The display can be switched off completely (standby).
- Area function if touched with the hand or when wiping. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Menu for temperature control with +/- buttons (warmer, cooler), target value display, mode selection button and fan speed setting
- Display lighting adjustable, including switched off in standby mode
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Control according to separate setpoints or basic setpoint temperature. With fan-coil control
- 2 AND and 2 OR logic gates each with 4 inputs. Switching events as well as 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- Configuration is made using the KNX software ETS 5
General | |
Casing Genuine glass, plastic | |
Colours (similar) | RAL 9010 pure white |
Size (W × H) | ≈ 85 mm × 85 mm |
Installation via socket | ≈ 10.5 mm |
Total depth | ≈ 31 mm |
Supporting ring (W × H) | ≈ 71 mm × 71 mm |
Total weight | ≈ 140 g |
Display resolution | 160 × 160 px |
Ambient temperature | -5…+45 °C |
Ambient humidity (RH) (non-condensing) | 5...80 % |
Storage temperature | -30...+80 °C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 254 |
Assignments max. | 254 |
Communication objects | 106 |
Nominal voltage | 30 V SELV |
Power consumption max. | 25 mA |
Connection KNX plug-in terminals | Conductor diameter: 0.6…0.8 mm s Stripping length: 5 mm |
Duration after bus voltage restoration until data is received | ≈ 5 s |
Sensor | |
Temperature measurement range | -5…+60 °C |
- Push button with integrated frame
- Supporting ring
- KNX plug-in terminal
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 71280
Languages:
RTF
Item No.: 71280
Languages:
Item No.: 71280
Languages:
Item No.: 71280
Languages:
Item No.: 71280
Languages:
Item No.: 71280
Languages:
Item No.: 71280
Languages:
Item No.: 71280
Languages:
ZIP
Item No.: 71280
Languages: