Station météo de rechange P03/3
remplace P00 (3 conducteurs), P01, P02
Remplacement pour P00 (3 conducteurs), P01 et P02pour les commandes WS1, WS10, WS20, WS1000, FS100 et PS8A
The P03/3 serves as a replacement weather station for the older WS1, WS10, WS20 and WS1000 conservatory control units, the FS100 façade control unit and the PS8A evaluation unit. It replaces the P00 (3-wire), P01 or P02 weather stations in these devices.
The P03/3 Weather Station measures temperature, wind speed, brightness (eastern, southern and western sun). It recognizes precipitation and receives the time signal with a GPS receiver. Central European Time is output, daylight savings time is adjusted automatically according to the specifications of central europe.
Please use the P03i-GPS or P04i-GPS weather station as a supplement and replacement for the current WS1 Colour, WS1 Style, WS1000 Colour, WS1000 Style, KNX WS1000 Colour, KNX WS1000Style and WS1000 Connect control units.
Weather station error message: Finding the cause
Error messages in the control unit display that indicate the weather station may also have their cause elsewhere. The "Weather station error" or "Delete string, bad rec." messages on the control unit display may also be caused by the control unit or the connection. Therefore, check all components
- Cable connection to the weather station,
- weather station and
- control unit.
Only after checking and, if necessary, repairing all components can you be sure that the system is working.
- Brightness measurement with three separate sensors for east, south andwest. Recognition of twilight/dawn with special filters
- Wind measurement: The wind strength measurement takes place electronically and thus noiselessly and reliably, even during hail, snow and sub-zero temperatures. Even turbulent air and anabatic winds in the vicinity of the weather station are recorded
- Temperature measurement
- Heated precipitation sensor (1.2 watts): No false reports as a result of fog or dew. Dries quickly after precipitation has stopped
- Integrated GPS receiver. Output of CET (Central European Time), automatic adjustment of daylight savings time.
| Housing | Plastic material |
| Colour | White / translucent |
| Mounting | On-wall |
| Degree of protection | IP 44 |
| Dimensions | approx. 96 × 77 × 118 (W × H × D, mm) |
| Weight | approx. 160 g |
| Ambient temperature | Operation -30…+50°C, Storage -30…+70°C |
| Operating voltage | 24 V DC |
| Connection | Screw terminal |
| Conductor cross-section | Solid/fine-stranded conductors 0.5...1.0mm² |
| Stripping length | 6 mm |
| Heating rain sensor | approx. 1.2 W |
| Measurement range temperature | -40…+80°C |
| Measurement range wind | 0…35 m/s |
| Measurement range brightness | 0 lux ... 99.000 lux |
| Producteur: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Allemagne info@elsner-elektronik.de Made in Germany |
- Station météorologique
- Jumper
- Instructions d’utilisation en allemand. Instructions d’utilisation en anglais en téléchargement
Filtrer par langue:
N° d'art.: 30107
Langues:
The P03/3 serves as a replacement weather station for the older WS1, WS10, WS20 and WS1000 conservatory control units, the FS100 façade control unit and the PS8A evaluation unit. It replaces the P00 (3-wire), P01 or P02 weather stations in these devices.
The P03/3 Weather Station measures temperature, wind speed, brightness (eastern, southern and western sun). It recognizes precipitation and receives the time signal with a GPS receiver. Central European Time is output, daylight savings time is adjusted automatically according to the specifications of central europe.
Please use the P03i-GPS or P04i-GPS weather station as a supplement and replacement for the current WS1 Colour, WS1 Style, WS1000 Colour, WS1000 Style, KNX WS1000 Colour, KNX WS1000Style and WS1000 Connect control units.
Weather station error message: Finding the cause
Error messages in the control unit display that indicate the weather station may also have their cause elsewhere. The "Weather station error" or "Delete string, bad rec." messages on the control unit display may also be caused by the control unit or the connection. Therefore, check all components
- Cable connection to the weather station,
- weather station and
- control unit.
Only after checking and, if necessary, repairing all components can you be sure that the system is working.
- Brightness measurement with three separate sensors for east, south andwest. Recognition of twilight/dawn with special filters
- Wind measurement: The wind strength measurement takes place electronically and thus noiselessly and reliably, even during hail, snow and sub-zero temperatures. Even turbulent air and anabatic winds in the vicinity of the weather station are recorded
- Temperature measurement
- Heated precipitation sensor (1.2 watts): No false reports as a result of fog or dew. Dries quickly after precipitation has stopped
- Integrated GPS receiver. Output of CET (Central European Time), automatic adjustment of daylight savings time.
| Housing | Plastic material |
| Colour | White / translucent |
| Mounting | On-wall |
| Degree of protection | IP 44 |
| Dimensions | approx. 96 × 77 × 118 (W × H × D, mm) |
| Weight | approx. 160 g |
| Ambient temperature | Operation -30…+50°C, Storage -30…+70°C |
| Operating voltage | 24 V DC |
| Connection | Screw terminal |
| Conductor cross-section | Solid/fine-stranded conductors 0.5...1.0mm² |
| Stripping length | 6 mm |
| Heating rain sensor | approx. 1.2 W |
| Measurement range temperature | -40…+80°C |
| Measurement range wind | 0…35 m/s |
| Measurement range brightness | 0 lux ... 99.000 lux |
| Producteur: Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim Allemagne info@elsner-elektronik.de Made in Germany |
- Station météorologique
- Jumper
- Instructions d’utilisation en allemand. Instructions d’utilisation en anglais en téléchargement
Filtrer par langue:
N° d'art.: 30107
Langues:
N° d'art.: 30107
Langues: