Radio Ventilation Module

With the RF-VM fan module ventilation devices from other manufacturers can be driven by the WS1, WS1000 (Colour or Style models) and KNX WS1000 Style controllers.
With the Remo 8 remote control or via the wireless switch interface, RF-B2 devices connected to the RF-VM can be switched directly.

Note: No ventilation module is required for Elsner Elektronik wireless controlled ventilation units.

  • Operation of ventilation devices (other manufacturers) on the conservatory/building controllers (starting with controller version 1.597)
  • Direct operation of fans on the RF-VM with remote control Remo 8 (starting with remote control version 0.1) or via switch interface RF-B2-UP
  • For air intake/exhaust devices or fresh air heating combinations (circulating air heating systems)
  • Eight speed settings, cover flap controllers
  • Wireless connection with the controllers, fans connected by cable
Housing Aluminium cover
Assembly Flush mounting
Protection category IP 20
Dimensions Cover approx. 220 x 140 (W x H, mm),
Mounting depth approx. 3 mm.
Concealed box approx. 200 x 120 x 64 (W x H x D, mm)
Total weight approx. 2.1 kg
Ambient temperature Operation 0…50°C, storage -20…85°C
Ambient humidity max. 95% RH, avoid condensation
Operating voltage 230 V AC, 50 Hz
Fan current drain max. 1.2 A
Motor output 8 settings, 80 V AC to 230 V AC
Wireless frequency 868.2 MHz