WS1000 Style

Building Control Systems

The WS1000 Style control system controls shading and ventilation, heatings, air conditioners and light. Connected motion and smoke detectors provide greater security.
Alongside the operating panel (central unit), the WS1000 Style provides a weather station and a radio-controlled indoor sensor WGTH-UP. The housing of the indoor sensor fits in 55mm switch frames and can therefore be seamlessly adjusted to the interior. By installing several sensors, individual room climates can be separately controlled.
Operation of the drives and devices at the glass touch display is exceptionally easy and comfortable. Drives can directly be moved manually. The automatic functions are adjusted individually in clearly structured menus. In idle mode, the display either turns off or the current weather is displayed: the sun travelling through the sky, rain or snow.


N° 60201 WS1000 Style-4, white, for 4 drives 230 V
N° 60202 WS1000 Style-6, white, for 6 drives 230 V
N° 60203 WS1000 Style-8, white, for 8 drives 230 V
N° 60204 WS1000 Style-10, white, for 10 drives 230 V

N° 60206 WS1000 Style-4, black, for 4 drives 230 V
N° 60207 WS1000 Style-6, black, for 6 drives 230 V
N° 60208 WS1000 Style-8, black, for 8 drives 230 V
N° 60209 WS1000 Style-10, black, for 10 drives 230 V

N° 60214 WS1000 Style-10 PF, white, for 10 drives potential-free

  • WS1000 Style, blanco (60201) WS1000 Style, blanco (60201)
  • WS1000 Style, unidad de control, blanco (60201) WS1000 Style, unidad de control, blanco (60201)
  • Sensor interior blanco Sensor interior blanco
  • WS1000 Style, negro (60206) WS1000 Style, negro (60206)
  • WS1000 Style, negro (60206), unidad de control WS1000 Style, negro (60206), unidad de control
  • Estación meteorológico Estación meteorológico
  • Estación meteorológico, ejemplo de montaje en mástil Estación meteorológico, ejemplo de montaje en mástil
  • Glass pane with integrated touch screen (8.4 inches). Extremely flat design.
  • In Idle mode, the screen can either display current weather data or be switched off or dimmed. Dimming the display saves energy and does not interfere with the ambience of the room
  • Adjustable display language (English, German, French, Italian)
  • Picture frame function (via SD card)
  • 4, 6, 8 or 10 drive outputs (dependent on model), available for 230 V drives or potential-free. For awnings, blinds, roller shutters, windows and sliding doors. Optional connection of multiple drives in a group (group control relay)
  • Centralised control of multiple drives in a drive group using the IMSG 230 Motor Control Unit. The individual motors can also be separately manually operated using additional hand buttons
  • Automatic slat angle adjustment on blinds: The slats can be positioned in accordance with the position of the sun, so that as much light as possible enters the room at all times without exposing it to direct sunlight. To achieve this, the control system calculates the position of the sun based on the location, date and time
  • “Slat Turning” and “Canvas Tightening” functions for blinds and awnings respectively (adjustments to correct positioning after a movement, required for certain shade motors)
  • 4 multifunctional outputs for heating, cooling, supply air, alarm systems, lighting, gutter heating or dimmers
  • 4 multifunctional inputs for motion detectors, smoke detectors, climate control detectors (status of independent heating/cooling), closed-contacts (for sliding doors) or impulses for automatic resets
  • A motion detector alarm will close the windows. A smoke alarm retracts the shades (escape routes) and starts ventilation (smoke extraction)
  • 32 wireless channels for WGTH-UP Indoor Sensors, Elsner Elektronik ventilation units, RF Relays, RF Motor Control Units, Remo 8 remote control
  • Connection of 10 external manual push-buttons
  • All connected drives and devices can be operated manually with the Remo 8 Remote Control (available separately)
  • Weather station for collection of wind speed, precipitation, temperature and brightness (including GPS receiver for calculation of the
  • The limit value for the detection of “twilight” can be set (e.g. for lights and for blinds for privacy)
  • Radio-controlled indoor sensor for measurement of temperature and air humidity. Wireless data transfer to central unit. Voltage supply via cable (e. g. from central unit)
  • All drives and units can be individually named (e.g. “Blind East”)
  • After manual operation, automatic resets set the drives and devices back into automatic mode. A time lag (e.g. 20 minutes after manual operation) or a fixed time point (e.g. at 3am) can be set. The resets can be activated separately for each drive group
  • The Settings menu can be protected with an access code against unauthorised changes
  • The function of the arrow keys can be adapted to the actual movement direction (manual direction), e. g. for blinds that extend from the bottom upwards
  • The direction of rotation of connected drives can be corrected in the control system menu

Central Unit

Housing Glass, plastic material
Colours White / grey
Dark grey / black
Mounting Flush / cavity wall
Protection category IP 40
Dimensions Display front approx. 270 × 185 (W × H, mm),
mounting depth approx. 9 mm
concealed box approx. 254 × 171 × 85 (W × H × D, mm)
Ambient temperature Operation 0…+55°C, storage -30…+70°C,
avoid condensation
Ambient air humiditymax. 5...95% RH, avoid bedewing
Operating voltage 230 V AC, 50 Hz
Power consumption Stand-by max. 17 W

Indoor Sensor WGTH-UP

Housing Plastic (partly pained)
Colours • White, glossy (similar to RAL 9016 Traffic White)
• Matt aluminium
Mounting Flush-mounted (installed in wall within junction box Ø 60 mm, 42 mm deep)
Protection category IP 20
Dimensions Housing approx. 55 × 55 (W × H, mm),
mounting depth approx. 15 mm,
base plate approx. 71 × 71 (W × H, mm)
Total weight approx. 50 g
Ambient temperature Operation -20…+70°C, storage -55…+90°C
Ambient air humidity max. 95% RH, avoid condensation
Operating voltage 7…30 V DC
Current max. 35 mA
Data output Wireless
Radio frequency 868.2 MHz
Measurement range temperature -20…+70°C
Measurement range humidity 0% RH … 100% RH

Weather Station P04i-GPS

Housing Plastic
Colour White / Translucent
Assembly Surface mount
Protection category IP 44
Dimensions approx. 62 × 71 × 152 (W × H × D, mm)
Weight weather station with mount approx. 90 g.
total weight including accessories approx.

280 g

Ambient temperature Operation -30…+50°C, Storage -30…+70°C
Voltage 24 V DC
Power max. 105 mA
Measurement range temperature -30°C ... +50°C
Measurement range wind 0 m/s … 35 m/s
Measurement range brightness 0 lux ... 99.000 lux