WGTH gl, pure white RAL 9010
Indoor Sensor (Temperature, Humidity)
Radio indoor sensor for temperature and humidity for WS1 and WS1000 Color/Style/Connect
Highlights
-
-
Radio sensor for Elsner RF Radio
- - Glass surface
The Indoor Sensor WGTH gl transfers temperature and humidity to the control system via radio. Several separate WGTH gl can be taught to one control system. The teaching is described in the chapter "Learn wireless connections" (manual of the control system).
The WGTH gl consists of the housing, the base plate and a frame. As an alternative to the supplied frame, a frame of the switch series used in the building may be used. You will additionally require a junction box (Ø 60 mm, 42 mm deep, not included in scope of delivery). For power supply (7...30 V DC), e. g. 12 V DC can be tapped from the connection board of the control unit (multifunctional input).
- Measurement of temperature and air humidity (relative)
- Suitable for: WS1 Color/Style, (KNX) WS1000 Color/Style/Connect, Solexa II (Temperature evaluation only)
Housing | Real glass, plastic |
Colours | White, glossy (similar to RAL 9010 pure white) |
Mounting | on device socket according to DIN EN IEC 60670-1 |
Degree of protection | IP 20 |
Dimensions | Housing approx. 55 x 55 (W x H, mm), mounting depth approx. 8 mm, base plate approx. 71 x 71 (W x H, mm) |
Total weight | approx. 50 g |
Ambient temperature | Operating -5…+45°C, Storage -55…+90°C |
Ambient air humidity | max. 95% RH, avoid bedewing |
Operating voltage | 11…28 V DC |
Current | max. 35 mA |
Data output | Wireless |
Wireless frequency | 868.2 MHz |
Protocol | Proprietary protocol (Elsner RF) |
Temperature measure-ment range | -5…+60°C |
Humidity measurement range |
0% RH …95% RH |
- Housing
- Base plate
- Frame
- Data sheet with installation instruction German, English, French, Italian, Spanish)
You will need in addition (not supplied):
- Socket Ø 60 mm, 42 mm deep
Filter by language:
RTF
The Indoor Sensor WGTH gl transfers temperature and humidity to the control system via radio. Several separate WGTH gl can be taught to one control system. The teaching is described in the chapter "Learn wireless connections" (manual of the control system).
The WGTH gl consists of the housing, the base plate and a frame. As an alternative to the supplied frame, a frame of the switch series used in the building may be used. You will additionally require a junction box (Ø 60 mm, 42 mm deep, not included in scope of delivery). For power supply (7...30 V DC), e. g. 12 V DC can be tapped from the connection board of the control unit (multifunctional input).
- Measurement of temperature and air humidity (relative)
- Suitable for: WS1 Color/Style, (KNX) WS1000 Color/Style/Connect, Solexa II (Temperature evaluation only)
Housing | Real glass, plastic |
Colours | White, glossy (similar to RAL 9010 pure white) |
Mounting | on device socket according to DIN EN IEC 60670-1 |
Degree of protection | IP 20 |
Dimensions | Housing approx. 55 x 55 (W x H, mm), mounting depth approx. 8 mm, base plate approx. 71 x 71 (W x H, mm) |
Total weight | approx. 50 g |
Ambient temperature | Operating -5…+45°C, Storage -55…+90°C |
Ambient air humidity | max. 95% RH, avoid bedewing |
Operating voltage | 11…28 V DC |
Current | max. 35 mA |
Data output | Wireless |
Wireless frequency | 868.2 MHz |
Protocol | Proprietary protocol (Elsner RF) |
Temperature measure-ment range | -5…+60°C |
Humidity measurement range |
0% RH …95% RH |
- Housing
- Base plate
- Frame
- Data sheet with installation instruction German, English, French, Italian, Spanish)
You will need in addition (not supplied):
- Socket Ø 60 mm, 42 mm deep
Filter by language:
RTF
Item No.: 20557
Languages:
Item No.: 20557
Languages:
Item No.: 20557
Languages:
Item No.: 20557
Languages:
Item No.: 20557
Languages:
Item No.: 20557
Languages: