Radio Motor Control Unit for 1 drive, 230 V output

The RF-MSG-DST is a radio motor control unit for one drive (e.g. shade or window). Via an additional connector, another motor control unit is supplied with power (loop-through function).

A connected drive can be operated directly using the remote controls Remo 8/pro, via the button interface RF-B2-UP or the solar radio button Corlo P RF.
If the drive shall execute automatic functions, the RF-MSG-ST is taught into the radio chanells of the WS1 Color/Style, WS1000 Color/Style/Connect or Solexa II controls.

  • RF-MSG-DST (60541) RF-MSG-DST (60541)
  • Example of using F-Con modules and lines Example of using F-Con modules and lines
  • Control of drives for shading elements (e.g. blinds) or windows
  • 1 connection for 230 V-drive (STAK3)
  • 1 output 230 V AC (STAS3) for supply of further motor control units
  • Reception of the radio control signal 
  • Suitable for: WS1 Color, WS1 Style, WS1000 Color, WS1000 Style, KNX WS1000 Style, WS1000 Connect, Solexa II, Remo 8 and Remo pro, RF-B2-UP, Corlo P1 RF, Corlo P2 RF
Protection categoryIP 54 (should be installed in a protected area despite a high protection category)
Dimensionsapprox. 149 x 72 x 29 (W x H x D, mm)
Weightapprox. 180 g
Ambient temperature Operation -25…+70 °C, storage -30…+85°C
Ambient humiditymax. 95% RH, avoid condensation
Operating voltage 230V AC
Input STAS3 plug, 230 V AC, 50 Hz
Output1 x 230 V AC (loop-through), STAK3 coupling,
max. 1.5 kW switch-on load per mains connection.
1 × drive, STAK3 coupling, 230 V AC (up/down/N/PE),
loadable to max. 4 A / 230 V AC.
Radio frequency868.2 MHz (Elsner RF)