RF-L-DST 1-10 V
Radio Dimmer for Electronic Ballasts
Radio dimmer with 1-10 V control for Elsner RF radio protocol
Highlights
-
-
Radio dimmer
-
-
Control via devices with Elsner RF radio protocol
-
-
16A/230V switching output and 10V dimming output
- - Easy installation due to STAK3 coupling
The RF-L-DST 1-10 V is a wireless dimmer for the Elsner RF wireless control protocol. The RF-L-DST 1-10 V has a 230 V switch output (16 A) and a 1-10 V control output for dimming. With this the Radio dimmer RF-L-DST 1-10 V is specially designed for the connection of electronic enhanced voltage generators (EVG), LED converters or electronic power supplies for low voltage systems.
The lighting connected to the wireless dimmer can be controlled automatically and manually via the WS1 or (KNX) WS1000 Color Style building controller or the Solexa II wireless control system. Alternatively, direct manual operation is possible using the Remo 8/pro wireless remote control, via the RF-B2-UP button interface or the Corlo P RF solar wireless control button.
- Dimmer for an electronic ballast, LED converter or electronic power supply unit for low-voltage systems
- 230 V switched output, 16 A
- 1-10 V control output
- Reception of the radio control signal
- Suitable for: WS1 Color, WS1 Style, WS1000 Color, WS1000 Style, KNX WS1000 Style (each from software version 1.818), Solexa II, Remo 8 (from version 0.1), Remo pro, RF-B2-UP, Corlo P1 RF, Corlo P2 RF
Housing | Plastic |
Degree of protection | IP 53 (should be installed in a protected area despite a high protection category) |
Dimensions | approx. 149 x 72 x 29 (W x H x D, mm) |
Weight | approx. 180 g |
Ambient temperature | Operation -20…+55°C, storage -30…+85°C |
Ambient humidity | max. 95% RH, avoid condensation |
Operating voltage | 230 V AC, 50 Hz (STAS3 plug) |
Output | 1 x switched output 230 V, 16 A, STAK3 coupling 1 × dimming 1-10 V, maximum 100 mA, STAK3 coupling |
Radio frequency | 868.2 MHz (Elsner RF) |
- Radio dimmer
- STASI locking bow, rubber seals
- Data sheet with installation instructions (German, English, French, Italian or Spanish)
Available accessories:
- Mains connection wire (5 m)
- Connection wire (available in 1 m; 2,5 m; 5 m)
Filter by language:
RTF
Item No.: 60561
Languages:
The RF-L-DST 1-10 V is a wireless dimmer for the Elsner RF wireless control protocol. The RF-L-DST 1-10 V has a 230 V switch output (16 A) and a 1-10 V control output for dimming. With this the Radio dimmer RF-L-DST 1-10 V is specially designed for the connection of electronic enhanced voltage generators (EVG), LED converters or electronic power supplies for low voltage systems.
The lighting connected to the wireless dimmer can be controlled automatically and manually via the WS1 or (KNX) WS1000 Color Style building controller or the Solexa II wireless control system. Alternatively, direct manual operation is possible using the Remo 8/pro wireless remote control, via the RF-B2-UP button interface or the Corlo P RF solar wireless control button.
- Dimmer for an electronic ballast, LED converter or electronic power supply unit for low-voltage systems
- 230 V switched output, 16 A
- 1-10 V control output
- Reception of the radio control signal
- Suitable for: WS1 Color, WS1 Style, WS1000 Color, WS1000 Style, KNX WS1000 Style (each from software version 1.818), Solexa II, Remo 8 (from version 0.1), Remo pro, RF-B2-UP, Corlo P1 RF, Corlo P2 RF
Housing | Plastic |
Degree of protection | IP 53 (should be installed in a protected area despite a high protection category) |
Dimensions | approx. 149 x 72 x 29 (W x H x D, mm) |
Weight | approx. 180 g |
Ambient temperature | Operation -20…+55°C, storage -30…+85°C |
Ambient humidity | max. 95% RH, avoid condensation |
Operating voltage | 230 V AC, 50 Hz (STAS3 plug) |
Output | 1 x switched output 230 V, 16 A, STAK3 coupling 1 × dimming 1-10 V, maximum 100 mA, STAK3 coupling |
Radio frequency | 868.2 MHz (Elsner RF) |
- Radio dimmer
- STASI locking bow, rubber seals
- Data sheet with installation instructions (German, English, French, Italian or Spanish)
Available accessories:
- Mains connection wire (5 m)
- Connection wire (available in 1 m; 2,5 m; 5 m)
Filter by language:
Item No.: 60561
Languages:
Item No.: 60561
Languages:
Item No.: 60561
Languages:
Item No.: 60561
Languages:
Item No.: 60561
Languages:
RTF
Item No.: 60561
Languages: