Solexa II

Wireless Control

Solexa II controls via a wireless connection drives and devices on Elsner electronic wireless actuators and makes the convenient manual operation of these drives and
consumers possible. The basis of the system are the Solexa II display and weather station, which allow for automatic control according to time, indoor temperature, outdoor temperature, brightness, sun position, wind speed and precipitation.

  • The shading automatic with weather station controls shutters, awnings and blinds according to the brightness and takes into account the direction of the sun, movement delays set, temperature blocks, wind, rain and frost alarms, movement position, timer and night functions.
  • The ventilation automatic with weather station controls controls casement and sliding windows based on the indoor temperature. In doing so, outdoor temperature, wind, rain and frost alarm, movement position and timer functions are taken into account.
  • The light automatic with weather station controls switches lights on and off according to the outdoor brightness (day/night) and time. If dimming modules are used, then the dim level (brightness of the lamp) is also taken into account.
  • The heating automatic with weather station controls switches a one or two level heating according to the indoor temperature and takes into account day and night (timer switch) and has a timer switch for manual heating during nighttime operation.
  • The roof gutter automatic with weather station controls switches a heating within a certain temperature range.
  • For all outputs a daily automatic reset and an automatic reset, a short time after a manual operation, can be set.

 

With Solexa II all data remain in-house

With the control Solexa II all individual control data are stored locally in the hardware of the device. No user data will be saved at external data storages or send to web servers. Therefore the closed system ensures data sovereignty. Settings, operations and display of measurement values are made directly on the Solexa II display. While using the Solexa II mobile app no data will be saved externally as well.

 

App for Solexa II

The Solexa II Mobile App allows for comfortable operation of Solexa II via smart phone or tablet PC and for display of current ambient and weather data. The is available in the Google Play Store (Android) and in the App Store (Apple).

Requirements:
-  Solexa II with weather station
-  WLAN Interface SOL (no 10154)
-  Router and configured wireless network (WLAN)
-  Terminal device (smart phone, tablet PC) with operating system Android 4.0.3 or iOS 8.0 (and above)


  • Solexa II Set (10150) Solexa II Set (10150)
  • Solexa II Display (10144) Solexa II Display (10144)
  • Solexa II Display (front and rear side) Solexa II Display (front and rear side)
  • Awards for Solexa II Awards for Solexa II

Functions and characteristics of the Solexa II display:

  • Operating part with monochrome touch display, indoor temperature sensor and real-time clock. Fixed integrated battery with USB charging socket. The display has a wall bracket, but can also be used like a remote control

 

Functions and characteristics of the Solexa II weather station:

  • Brightness measurement (1 sun sensor), temperature measurement, wind speed measurement, precipitation recognition and GPS receiver for date/time and installation coordinates (sun position calculation)
  • Weather station for use with up to 4 Solexa II displays
  • Weather station with a connection for a 230 V motor (integrated motor control unit), for up to 16 Elsner RF wireless actuators and up to 32 Elsner RF-operating devices/sensors
  • Integration of the weather station in the WLAN (for app usage) via optional interface SOL

 

Compatible wireless actuators for the Solexa II system:

  • Motor control units RF-MSG-ST, RF-MSG, RF-MSG-PF for drives on shadings and windows. If necessary, a number of drives can be connected to a RF-MSG using a group controller relay
  • Switching relay RF-relay-ST, RF-relay-UP for consumers such as lamps and one level heaters
  • Dimmer RF-L UN-ST, RF-L LED-ST, RF-L-UP 1-10 V for dimmable lights
  • Heating module RF-HE-ST for two level heaters

 

Compatible operating devices and sensors for the Solexa II system:

  • Remote control Remo 8
  • Button Corlo P2 RF
  • Button at the interface RF-B2-UP
  • Temperature sensor WGT
  • Sensor WGTH-UP for temperature measurement (humidity measurement by the sensor is not evaluated)

Display

Material Plastic
Display Visible diagonal 126 mm
Colours white/aluminium coloured painted
Assembly Surface mounted with wall bracket
Dimensions approx. 107 x 112 x 14 (W x H x D, mm)
Weight approx. 170 g
Ambient temperature Operation 0…+50°C, storage -10…+50°C
Ambient humidity max. 95% RH, avoid condensation
Operating voltage Battery 3.8 V DC
USB charging current 100 mA
Wireless frequency 868.2 MHz
Temperature measurement range-40°C...+80°C

Weather station

Housing Plastic
Colour White / Translucent
Assembly Surface mount
Protection category IP44
Dimensions approx. 96 × 77 × 118 (W × H × D, mm)
Weight approx. 260 g
Ambient temperature Operation -30…+60°C, storage -30…+70°C
Operating voltage 230 V AC, 50 Hz
Power consumption Operation: approx. 4 W / 230 V
Wireless frequency 868.2 MHz
Switching capacity relay max. 400 W
Rain sensor heater approx. 1.2 W
Temperature measurement range-40…+80°C
Resolution temperature0.6°C
Wind measurement range 0…120 km/h
Resolution wind 1 km/h
Brightness measurement range0…150 kLux
Brightness resolution 1 kLux