Solexa 230 V

Shading Control

The Solexa Shading Control is for opening and retracting an awning or blind dependently of light intensity and room temperature. Outdoor shadings are automatically protected from rain, wind and frost. These alarm functions can be switched off individually. If the blind or awning should not been shut completely by the automatic system setting of customized shading positions is possible. For blinds an additional slat opening angle can be programmed (reversing). A group control relay offers simultaneous control of several drives.

The drive that should be controlled is directly connected to the weather station, what minimizes the effort for cabling. The weather station and the battery-powered operation unit exchange their data and commands via radio. No cable is required for electricity supply or control data inside the building. So no cable needs to be installed in the rooms! Therefor the Solexa Shading Control is an ideal option for retrofitting.

Models:

N° 10110 Solexa 230 V, white
N° 10130 Solexa 230 V, aluminium brushed
N° 10131 Solexa 230 V, perl dark grey brushed


  • Solexa 230 V, white (10110) Solexa 230 V, white (10110)
  • Solexa 230 V, aluminium (10130) Solexa 230 V, aluminium (10130)
  • Solexa 230 V, perl dark grey (10131) Solexa 230 V, perl dark grey (10131)
  • Solexa 230 V, connection diagramm Solexa 230 V, connection diagramm
  • For an awning or a blind (230 V motor), parallel operation of several drives as a group possible (with group control relais). The drive is connected to the weather station
  • Radio connection between weather station and control unit
  • Control unit with display and keypad and integrated indoor temperature sensor
  • Basic setting, adjustment of the automatic functions and manual operation with the control unit
  • Rotational direction of the motor and operating direction (whether shading extends from top or from bottom) may be adjusted separately during the basic setting at the control unit
  • Shading position for automatic mode can be adjusted (for ex. extend only half the way). Reversing of blinds (slats are tilted so that diffuse light can enter the room)
  • Application as a central control possible (Control of IMSG 230 Motor Control Units)
  • Enhancement with devices of the System XS possible (radio control of shadings and windows)
  • Connected drives can be operated with Remote Control Remo 8 or Pushbutton Interface RF-B2-UP (available separately)
  • Colours operating unit: white matt (similar to RAL 9016 Traffic White), aluminium matt brush finished or pearl dark grey matt brush finished
Radio frequency868,2 MHz

Control unit:

HousingPlastic material (partly lacquered)
Colours• White matt (similar to RAL 9016 Traffic White)
• Aluminium matt brush finished
• Pearl dark grey matt brush finished
MountingOn-wall
Protection categoryIP 40
Dimensionsapprox. 103 × 98 × 28 (W × H × D, mm)
Total weightapprox. 170 g (including batteries)
Ambient temperatureOperation 0…+50°C, storage -10…+50°C
Ambient air humiditymax. 80% RH, avoid bedewing
Operating voltage2 x 1.5 V (2 batteries, AA/Mignon/LR6) or 2 x 1.2 V (2 rechargeable batteries, AA/Mignon/LR6)

Weather station:

HousingPlastic material
ColourWhite / translucent
MountingOn-wall
Protection categoryIP 44
Dimensionsapprox. 96 × 77 × 118 (W × H × D, mm)
Weightapprox. 260 g
Ambient temperatureOperation -30…+60°C, storage -30…+70°C
Operating voltage230 V AC, 50 Hz
Currentmax. 22 mA
Power consumptionmax. 10 W, Stand-by approx. 4 W
Output1 x 230 V drive mechanism (up/down/N/PE),
can carry up to 1000 W, fused with mircro fuse T 6.3 A
Heating rain sensorapprox. 1.2 W
Measurement range temperature sensor-40…+80°C
Measurement range wind sensor0…35 m/s
Measurement range brightness sensor0…150 klux
made in germany