RF-MSG2-DST

Radio Motor Control Unit for 2 Drives

The RF-MSG2-DST is a radio motor control unit for the controls WS1 and WS1000 Color or Style or the radio control Solexa II. Drives (e.g. shadings or windows) can be connected to the control unit. A drive connected to the radio motor control unit can also be operated directly using the remote controls Remo, via the push buttons Corlo P RF or via the button interface RF-B2-UP (without an additional control unit).
The motor control unit RF-MSG2-DST has two drive outputs. These can be used to connect drives for two shades, two windows, or one shade and one window, controlled separately.


  • RF-MSG2-DST (60542) RF-MSG2-DST (60542)
  • Example of using F-Con modules and lines Example of using F-Con modules and lines
  • Control of drives for shading (e.g. blinds) or windows
  • 2 connections for 230V-drives
  • Reception of the radio control signal
  • Suitable for Controls WS1 Color, WS1 Style, WS1000 Color, WS1000 Style (from software version 1.822), KNX WS1000 Style, Solexa II (from software version 1.4), Radio remote controls Remo 8 and Remo pro, button interface RF-B2-UP, push button Corlo P1 RF, push button Corlo P2 RF
Housing Plastic
Protection category IP 54 (should be installed in a protected area despite a high protection category)
Dimensions ca. 149 x 72 x 29 (W x H x D, mm)
Weight ca. 203 g
Ambient temperature Operation -25…+70 °C, storage -30…+85°C
Ambient humidity max. 95% RH, avoid condensation
Operating voltage 230 V AC
Input 230 V AC, 50 Hz (Up/Down/N/PE)
STAS3 plug
Output 2 x drive (STAK3 coupling), 230 V AC (Up/Down/N/PE),
total load up to 4 A / 230 V AC
Radio frequency 868,2 MHz
made in germany