WG AQS/TH-UP

Indoor Sensor (CO2, Temperature, Humidity)

The WG AQS/TH-UP sensor transmits via wireless temperature, humidity and CO2 content in the air to the WS1 Colour/Style or (KNX) WS1000 Colour/ Style controller. Several sensors can be "taught" on one controller. The teaching procedure is described in the chapter "Learning wireless connections" (Controller manual).
The WG AQS/TH-UP consists of the housing, the sensor printed circuit board/baseplate, the CO2 sensor and a frame. As an alternative to the frame provided, a frame in the switch series used in the building can be used. You also need a junction box (Ø 60 mm, 42 mm deep, not included in the deliverables).
For the power supply (11...30 V DC) e.g. 12 V DC can be drawn from the connector board for the control system (multifunction-input).

Models:

N° 20553 WG AQS/TH-UP, white
N° 20554 WG AQS/TH-UP, aluminium


  • WG AQS/TH-UP, white (20553) WG AQS/TH-UP, white (20553)
  • WG AQS/TH-UP, alu (20554) WG AQS/TH-UP, alu (20554)
  • WG AQS/TH-UP in white and alu WG AQS/TH-UP in white and alu
Housing Plastic (partially painted)
Colours • White, glossy (similar to RAL 9016 Traffic White),
• Matt aluminium
Assembly Flush mounting (Flush mounting in junction box Ø 60 mm, 42 mm depth)
Protection category IP 20
Dimensions Housing approx. 55 x 55 (W x H, mm),
construction depth approx. 15 mm
baseplate approx. 71 x 71 (W x H, mm)
Total weight approx. 50 g
Ambient temperature Operation -20…+70°C, storage -30…+70°C
avoid condensation
Operating voltage 11…30 V DC
Power max. 35 mA
Data output Via wireless
Wireless frequency 868.2 MHz
Protocol own protocol (Elsner RF)
Temperature measurement range -20…+70°C
Humidity measurement range 0% RH… 95% RH
CO2 measurement range 0...2000 ppm
made in germany