RF-L PWM-ST

Wireless dimmer for LED lighting strips

 

RF-L PWM-ST is a wireless dimmer for LED lighting strips. The LED strips are connected to the terminal box provided (4 terminals). The power supply is provided by a suitable power supply unit (the set includes a 24 V DC power supply unit for a maximum of 120 W / 5 A in the scope of delivery).

A light connected to the Wireless Dimmer RF-L PWM-ST can also be operated directly using Elsner's remote control Remo 8 or Remo pro via the RF-B2-UP button interface or the solar radio button Corlo P RF. The wireless dimmer is also suitable for operation together with Elsner's WS1 and WS1000 Color and Style controllers and for the Solexa II wireless system. It is programmed to a wireless channel of the control system, receiving automatic and manual commands from it.

Modelle:

N° 60549 Set with dimmer IP53, terminal box and power supply
N° 60559 Set with dimmer IP54, terminal box and power supply
N° 60548 Dimmer IP53 with terminal box
N° 60558 Dimmer IP54 with terminal box
N° 60528 Power supply


  • RF-L PWM-ST IP53 (60549, Set consisting of dimmer with connection box and supply) RF-L PWM-ST IP53 (60549, Set consisting of dimmer with connection box and supply)
  • RF-L PWM-ST IP54 (60559, Set consisting of dimmer with connection box and supply) RF-L PWM-ST IP54 (60559, Set consisting of dimmer with connection box and supply)
  • RF-L PWM-ST IP53 (60548, Dimmer with connection box) RF-L PWM-ST IP53 (60548, Dimmer with connection box)
  • RF-L PWM-ST IP54 (60558, Dimmer with connection box) RF-L PWM-ST IP54 (60558, Dimmer with connection box)
  • RF-L PWM-ST (60528, Power supply) RF-L PWM-ST (60528, Power supply)
  • Scheme of installation Scheme of installation
  • Dimmer with pulse width modulation (PWM), max. load 120 W / 5 A bei 24 V DC (60 W / 5 A bei 12 V DC)
  • For LED lighting strips (12-24 V DC)
  • Dimming in 1% steps
  • STAS3/STAK3 terminals
  • Reception of the wireless control signal
  • Suitable for: WS1 Color, WS1 Style, WS1000 Color, WS1000 Style, KNX WS1000 Style (each from software version 1.8). Solexa II. Remo 8 (from version 0.1), Remo pro, RF-B2-UP, Corlo P1 RF, Corlo P2 RF

Dimmer:

Housing Plastic
Protection categoryRF-L PWM-ST IP53: IP53
RF-L PWM-ST IP54: IP54
DimensionsRF-L PWM-ST IP53: approx. 147 x 36 x 29 (B x H x T, mm)
RF-L PWM-ST IP54: approx. 147 x 49 x 32 (B x H x T, mm)
Weight approx. 140 g
Ambient temperature Operation -20…+55 °C, storage -55…+90°C
Ambient humidity max. 95% RH, avoid condensation
Operating voltage 12...24 V DC, STAS3 plug.
The voltage of the used power supply must match the connected LEDs.
Output STAK3 coupling, loadat 24 V DC up to a maximum of 120 W / 5 A,
at 12 V DC up to a maximum of 60 W / 5 A.
Output voltage corresponds to input voltage
Radio frequency 868,2 MHz (Elsner RF)

Terminal box:

Housing Plastic
Protection category IP 55
Dimensions approx. 109 x 39 x 44 (W x H x D, mm),
cable length aprox. 47 cm plus plug
Weight approx. 140 g
Ambient temperature Operation -20…+70 °C, storage -55…+90°C
Ambient humidity max. 95% RH, avoid condensation
Input STAS3 plug, 12...24 V DC.
The voltage of the used power supply must match the connected LEDs.
Output +/- terminals with 4 points each

Power supply unit NPF-120-24:

Housing Plastic
Protection category IP 67
Dimensions approx. 194 x 37 x 64 (W x H x D, mm),
Cable length approx. 14 cm plus plug on both ends
Weight approx. 950 g
Ambient temperature Operation:
-40…+70 °C at 2.5 A
-40...+45 °C at 5 A
Storage: -40…+80 °C
Ambient humidity max. 95% RH, avoid condensation
Input STAS3 plug (100-240 V AC, 50/60 Hz, 1,5 A)
Output STAK3 coupling (24 V DC, 120 W / 5A)