KNX eTR 101-BA2
Room Temperature Controller with 2 A/D Inputs
KNX room thermostat with inputs for binary contacts or additional temperature sensors
The Room Temperature Controller KNX eTR 101-BA2 measures the room temperature and displays the current value in white illuminated figures. Via the bus the device can receive an external measured value and process it with own data to overall temperature value (mixed value). The KNX eTR 101-BA2 has a integrated PI controller for a heating/cooling system. Either binary contacts such as pushbuttons or window contacts or analogue temperature sensors T-NTC can be connected to 2 inputs
Models:
N° 71310 KNX eTR 101-BA2, signal white RAL 9003
N° 71312 KNX eTR 101-BA2, jet black RAL 9005
- Measurement of temperature. Mixed value from own measured value and external values (proportions can be set in percentage), output of minimum and maximum values
- Display of the actual value or the target value/basic setpoint shift
- 2 touch buttons (+/-) for adjustment of the room temperature
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- 2 inputs for binary contacts or T-NTC temperature sensor
Configuration is made using the KNX software ETS 5
General | |
Casing | Genuine glass, plastic |
Colours (similar) | RAL 9003 (white) RAL 9005 (black) |
Assembly on device socket e.g. according to | DIN EN IEC 60670-1 |
Size approx. (W × H) | 81.5 mm x 81.5 mm |
Mounting depth approx. | 12 mm |
Total weight approx. | 70 g |
Ambient temperature | 0…+55 °C |
Ambient humidity (RH) (non-condensing) | 5...95 % |
Storage temperature | -30...+85 °C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX-Bus | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 227 |
Assignments max. | 227 |
Communication objects | 77 |
Nominal voltage | 30 V SELV |
Power consumption max. | 18 mA |
Connection KNX plug terminals Conductor diameter Stripping length | 0.6…0.8 mm² s 5 mm |
Duration after bus voltage restoration until data is received approx. | 5 s |
Inputs | |
Number | 2 |
Analogue/ digital | |
Contact voltage | 5 V |
Contact current | 0,5 mA |
Messbereich Temperatursensor T-NTC (Nr. 30516) an Eingang | -40...+80 °C |
Resolution | 0.1 °C |
Maximum cable length | 10 m |
Connection spring-loaded terminals | |
Conductor diameter rigid and flexible conductors flexible conductors with ferrules | 0.2...0.75 mm² 0.25...0.34 mm²< |
Stripping length | 7...9 mm |
Sensor | |
Temperature measurement range | 0…+55 °C |
Temperature resolution | 0.1 °C |
- Temperature Sensor with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- KNX terminal
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Optionally orderable accessories
- Temperature sensor T-NTC (no. 30516)
Filter by language:
RTF
Item No.: 71312, 71310
Languages:
Item No.: 71312, 71310
Languages:
ZIP
Item No.: 71312, 71310
Languages:
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages:
The Room Temperature Controller KNX eTR 101-BA2 measures the room temperature and displays the current value in white illuminated figures. Via the bus the device can receive an external measured value and process it with own data to overall temperature value (mixed value). The KNX eTR 101-BA2 has a integrated PI controller for a heating/cooling system. Either binary contacts such as pushbuttons or window contacts or analogue temperature sensors T-NTC can be connected to 2 inputs
Models:
N° 71310 KNX eTR 101-BA2, signal white RAL 9003
N° 71312 KNX eTR 101-BA2, jet black RAL 9005
- Measurement of temperature. Mixed value from own measured value and external values (proportions can be set in percentage), output of minimum and maximum values
- Display of the actual value or the target value/basic setpoint shift
- 2 touch buttons (+/-) for adjustment of the room temperature
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- 2 inputs for binary contacts or T-NTC temperature sensor
Configuration is made using the KNX software ETS 5
General | |
Casing | Genuine glass, plastic |
Colours (similar) | RAL 9003 (white) RAL 9005 (black) |
Assembly on device socket e.g. according to | DIN EN IEC 60670-1 |
Size approx. (W × H) | 81.5 mm x 81.5 mm |
Mounting depth approx. | 12 mm |
Total weight approx. | 70 g |
Ambient temperature | 0…+55 °C |
Ambient humidity (RH) (non-condensing) | 5...95 % |
Storage temperature | -30...+85 °C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX-Bus | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 227 |
Assignments max. | 227 |
Communication objects | 77 |
Nominal voltage | 30 V SELV |
Power consumption max. | 18 mA |
Connection KNX plug terminals Conductor diameter Stripping length | 0.6…0.8 mm² s 5 mm |
Duration after bus voltage restoration until data is received approx. | 5 s |
Inputs | |
Number | 2 |
Analogue/ digital | |
Contact voltage | 5 V |
Contact current | 0,5 mA |
Messbereich Temperatursensor T-NTC (Nr. 30516) an Eingang | -40...+80 °C |
Resolution | 0.1 °C |
Maximum cable length | 10 m |
Connection spring-loaded terminals | |
Conductor diameter rigid and flexible conductors flexible conductors with ferrules | 0.2...0.75 mm² 0.25...0.34 mm²< |
Stripping length | 7...9 mm |
Sensor | |
Temperature measurement range | 0…+55 °C |
Temperature resolution | 0.1 °C |
- Temperature Sensor with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- KNX terminal
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Optionally orderable accessories
- Temperature sensor T-NTC (no. 30516)
Filter by language:
RTF
Item No.: 71312, 71310
Languages:
Item No.: 71312, 71310
Languages:
Item No.: 71312, 71310
Languages:
Item No.: 71312, 71310
Languages:
Item No.: 71312, 71310
Languages:
Item No.: 71312, 71310
Languages:
Item No.: 71312, 71310
Languages:
ZIP
Item No.: 71312, 71310
Languages:
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages: