KNX eTR 205/206 Light
Button for Temperature Control
and Light
KNX heating controller with temperature sensor and light operation
The KNX eTR 205/206 Light push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and light. LEDs are integrated in these areas and their behaviour can be adjusted. A temperature sensor is integrated into KNX eTR 205/206 Light. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value). The KNX eTR 205/206 Light has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons. Communication objects can be linked via AND and OR logic gates.
Models:
No. 71160 KNX eTR 205 Light, signal white RAL 9003
No. 71170 KNX eTR 206 Light, signal white RAL 9003
- Operating zone for temperature control with 2 areas (warmer, cooler)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Additional functions KNX eTR 205 Light:
- 1 operating zone for light with 2 areas (switching/dimming with short/ long distinction)
Additional functions KNX eTR 206 Light:
- 2 operating zones for light with 2 areas (switching/dimming with short/ long distinction)
Configuration is made using the KNX software ETS 5
Housing | plastic material, glass |
Colours | RAL 9003 (white) RAL 9005 (black) |
Mounting | on-wall (directly or with a socket Ø 60 mm, resp. cavity wall socket for hole Ø 68 mm) |
Degree of protection | IP 10 |
Dimensions | housing approx. 81,5 x 81,5 (W x H, mm), mounting depth approx. 12 mm |
Total weight | approx. 70 g |
Ambient temperature | Operation 0…+55°C, storage -30…+85°C |
Ambient air humidity | 5...95% RH, avoid bedewing |
Operating voltage | KNX bus voltage |
Bus current | max. 25 mA |
Data output | KNX +/- bus terminals |
Group addresses | max. 254 |
Allocations | max. 254 |
Communication objects | KNX eTR 205 Light: 92 KNX eTR 206 Light: 98 |
Temperature measurement range | 0…+55°C |
Temperature resolution | 0.1°C |
- Room temperature controller with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
RTF
Item No.: 71162, 71160
Languages:
Item No.: 71162, 71160
Languages:
ZIP
Item No.: 71162, 71160
Languages:
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages:
The KNX eTR 205/206 Light push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and light. LEDs are integrated in these areas and their behaviour can be adjusted. A temperature sensor is integrated into KNX eTR 205/206 Light. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value). The KNX eTR 205/206 Light has a PI controller for heating and cooling. The setpoint temperature can be changed using the "+" and "-" touch buttons. Communication objects can be linked via AND and OR logic gates.
Models:
No. 71160 KNX eTR 205 Light, signal white RAL 9003
No. 71170 KNX eTR 206 Light, signal white RAL 9003
- Operating zone for temperature control with 2 areas (warmer, cooler)
- LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
- Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
- PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Additional functions KNX eTR 205 Light:
- 1 operating zone for light with 2 areas (switching/dimming with short/ long distinction)
Additional functions KNX eTR 206 Light:
- 2 operating zones for light with 2 areas (switching/dimming with short/ long distinction)
Configuration is made using the KNX software ETS 5
Housing | plastic material, glass |
Colours | RAL 9003 (white) RAL 9005 (black) |
Mounting | on-wall (directly or with a socket Ø 60 mm, resp. cavity wall socket for hole Ø 68 mm) |
Degree of protection | IP 10 |
Dimensions | housing approx. 81,5 x 81,5 (W x H, mm), mounting depth approx. 12 mm |
Total weight | approx. 70 g |
Ambient temperature | Operation 0…+55°C, storage -30…+85°C |
Ambient air humidity | 5...95% RH, avoid bedewing |
Operating voltage | KNX bus voltage |
Bus current | max. 25 mA |
Data output | KNX +/- bus terminals |
Group addresses | max. 254 |
Allocations | max. 254 |
Communication objects | KNX eTR 205 Light: 92 KNX eTR 206 Light: 98 |
Temperature measurement range | 0…+55°C |
Temperature resolution | 0.1°C |
- Room temperature controller with mounting
- 4 screw anchors 4 × 20 mm, 4 flat head screws 3 × 25 mm
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
RTF
Item No.: 71162, 71160
Languages:
Item No.: 71162, 71160
Languages:
Item No.: 71162, 71160
Languages:
Item No.: 71162, 71160
Languages:
Item No.: 71162, 71160
Languages:
Item No.: 71162, 71160
Languages:
Item No.: 71162, 71160
Languages:
ZIP
Item No.: 71162, 71160
Languages:
ZIP
Item No.: 70650, 70651, 71312, 71060, 71062, 71112, 71110, 71092, 71090, 71162, 71160, 71300, 71302, 71310, 71190, 71192, 30190
Languages: