KNX T-UP Touch CH

Temperature sensor and controller with touch keys

 

  • Room controller with glass surface
  • Heating control
  • Glass surface
  • Integrated temperature sensor

 

The Temperature Sensor KNX T-UP Touch CH measures the room temperature. The indoor sensor can receive an external measured value via the bus and process it with own data to overall temperature value (mixed value). TheKNX T-UP Touch offers two push buttons that may be used for changing the ambient temperature (target value), for switching between operating modes or as free programmable bus push buttons. The KNX T-UP Touch provides adjustable threshold values. The threshold value outputs and further communication objects can be linked by AND and OR logic gates. Additional y, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has integrated PI controller for a heating/cooling system. The integrated display shows the own values and data received from the bus (e.g. date, time). The device is completed with a frame of the switching series installed in the building and thus merges with the interior.

Models:


N° 70633 KNX T-UP Touch CH, pure white RAL 9010
N° 70634 KNX T-UP Touch CH, jet black RAL 9005

Delivery without frame


  • KNX T-UP Touch CH KNX T-UP Touch CH
  • KNX T-UP Touch CH white (70633) KNX T-UP Touch CH white (70633)
  • KNX T-UP Touch CH white (not included in the delivery) KNX T-UP Touch CH white (not included in the delivery)
  • KNX T-UP Touch CH black RAL 9005 (70634) KNX T-UP Touch CH black RAL 9005 (70634)
  • KNX T-UP Touch CH black with frame (not included in the delivery) KNX T-UP Touch CH black with frame (not included in the delivery)
  • Measurement of temperature
  • Mixed value from own measured values and external values (proportions can be set in percentage)
  • Display 1-3 rows (own values or values received from the bus) or display of temperature control (see Mode display and manual temperature controller)
  • 2 push buttons. Configuration as bus push button or for changing ambient temperature and switching between operating modes (see Change ambient temperature with the buttons)
  • PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
  • Threshold values can be adjusted per parameter or via communication objects: 3 × temperature
  • 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
  • 2 actuating variable comparators for output of minimum, maximum or average values. Each with 5 inputs (for values received via communication objects)
  • Configuration is made using the KNX software ETS 5
Housing Glass, plastic material
Colours • similar to RAL 9010 pure white • similar to RAL 9005 jet black
Mounting Installation in inlet box
Protection category IP 20
Dimensions Housing approx. 60x 60 (W x H, mm), mounting depth approx. 8 mm
Total weight approx. 60 g
Ambient temperature Operation 0…+50°C, storage -10…+60°C
Ambient air humidity max. 95% RH, avoid bedewing
Operating voltage KNX bus voltage
Bus current max. 10 mA
Data output KNX +/- bus terminal plug
Group addresses max. 254
Allocations max. 254
Communication objects 180
Temperature measurement range 0…+50°C