KNX T-UP gl CH, pure white RAL 9010

KNX Temperature Sensor

The Sensor KNX T-UP gl CH measures the room temperature. The indoor sensor can receive an external measured value via the bus and process it with own data to an overall temperature value (mixed value). The KNX T-UP gl CH provides adjustable threshold values. The threshold value outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has integrated PI controller for a heating/cooling system. The device is completed with a frame of the switching series installed in the building and thus merges with the interior.


  • KNX T-UP gl CH KNX T-UP gl CH
  • KNX T-UP gl CH with frame (not included in the delivery) KNX T-UP gl CH with frame (not included in the delivery)
  • KNX T-UP gl CH with frame (not included in the delivery) KNX T-UP gl CH with frame (not included in the delivery)
  • Measurement of temperature
  • Mixed values from own measured value and external values (proportions
    can be set in percentage)
  • PI controller for heating (one or two step) and cooling (one or two step)
    depending on temperature. Control according to separate target values or
    basic target temperature
  • Threshold values can be adjusted per parameter or via communication
    objects: 3 × temperature
  • 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident
    as well as 16 logic inputs in the form of communication objects, may be used
    as inputs for the logic gates. The output of each gate may optionally be
    configured as 1 bit or 2 x 8 bits
  • 2 actuating variable comparators for output of minimum, maximum or
    average values. Each with 5 inputs (for values received via communication
    objects)
  • Configuration is made using the KNX software ETS 5
Housing Glass, plastic material
Colours • similar to RAL 9010 pure white
• on request: similar to RAL 9005 jet black
Mounting Installation in inlet box
Protection category IP 20
Dimensions Housing approx. 60 x 60 (W x H, mm), mounting depth approx. 8 mm
Total weight approx. 50 g
Ambient temperature Operation 0…+50°C, storage -10…+60°C
Ambient air humidity max. 95% RH, avoid bedewing
Operating voltage KNX bus voltage
Bus current max. 10 mA
Data output KNX +/- bus terminal plug
Group addresses max. 254
Allocations max. 254
Communication objects 152
Temperature measurement range 0…+50°C